From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, jgross@suse.com,
Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v2 03/13] xen/pvcalls: implement socket command and handle events
Date: Wed, 26 Jul 2017 10:27:47 -0400 [thread overview]
Message-ID: <5978A6E3.7010809@oracle.com> (raw)
In-Reply-To: <1501017730-12797-3-git-send-email-sstabellini@kernel.org>
On 7/25/2017 5:22 PM, Stefano Stabellini wrote:
> Send a PVCALLS_SOCKET command to the backend, use the masked
> req_prod_pvt as req_id. This way, req_id is guaranteed to be between 0
> and PVCALLS_NR_REQ_PER_RING. We already have a slot in the rsp array
> ready for the response, and there cannot be two outstanding responses
> with the same req_id.
>
> Wait for the response by waiting on the inflight_req waitqueue and
> check for the req_id field in rsp[req_id]. Use atomic accesses to
> read the field. Once a response is received, clear the corresponding rsp
> slot by setting req_id to PVCALLS_INVALID_ID. Note that
> PVCALLS_INVALID_ID is invalid only from the frontend point of view. It
> is not part of the PVCalls protocol.
>
> pvcalls_front_event_handler is in charge of copying responses from the
> ring to the appropriate rsp slot. It is done by copying the body of the
> response first, then by copying req_id atomically. After the copies,
> wake up anybody waiting on waitqueue.
>
> pvcallss_lock protects accesses to the ring.
>
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
> drivers/xen/pvcalls-front.c | 94 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/xen/pvcalls-front.h | 8 ++++
> 2 files changed, 102 insertions(+)
> create mode 100644 drivers/xen/pvcalls-front.h
>
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index 5e0b265..d1dbcf1 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -20,6 +20,8 @@
> #include <xen/xenbus.h>
> #include <xen/interface/io/pvcalls.h>
>
> +#include "pvcalls-front.h"
> +
> #define PVCALLS_INVALID_ID (UINT_MAX)
> #define RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
> #define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
> @@ -40,9 +42,101 @@ struct pvcalls_bedata {
>
> static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
> {
> + struct xenbus_device *dev = dev_id;
> + struct pvcalls_bedata *bedata;
> + struct xen_pvcalls_response *rsp;
> + uint8_t *src, *dst;
> + int req_id = 0, more = 0, done = 0;
> +
> + if (dev == NULL)
> + return IRQ_HANDLED;
> +
> + bedata = dev_get_drvdata(&dev->dev);
> + if (bedata == NULL)
> + return IRQ_HANDLED;
> +
> +again:
> + while (RING_HAS_UNCONSUMED_RESPONSES(&bedata->ring)) {
> + rsp = RING_GET_RESPONSE(&bedata->ring, bedata->ring.rsp_cons);
> +
> + req_id = rsp->req_id;
> + src = (uint8_t *)&bedata->rsp[req_id];
> + src += sizeof(rsp->req_id);
> + dst = (uint8_t *)rsp;
> + dst += sizeof(rsp->req_id);
These two lines can be combined (both src and dst)
> + memcpy(dst, src, sizeof(*rsp) - sizeof(rsp->req_id));
> + /*
> + * First copy the rest of the data, then req_id. It is
> + * paired with the barrier when accessing bedata->rsp.
> + */
> + smp_wmb();
> + WRITE_ONCE(bedata->rsp[req_id].req_id, rsp->req_id);
> +
> + done = 1;
> + bedata->ring.rsp_cons++;
> + }
> +
> + RING_FINAL_CHECK_FOR_RESPONSES(&bedata->ring, more);
> + if (more)
> + goto again;
> + if (done)
> + wake_up(&bedata->inflight_req);
> return IRQ_HANDLED;
> }
>
> +int pvcalls_front_socket(struct socket *sock)
> +{
> + struct pvcalls_bedata *bedata;
> + struct xen_pvcalls_request *req;
> + int notify, req_id, ret;
> +
> + if (!pvcalls_front_dev)
> + return -EACCES;
> + /*
> + * PVCalls only supports domain AF_INET,
> + * type SOCK_STREAM and protocol 0 sockets for now.
> + *
> + * Check socket type here, AF_INET and protocol checks are done
> + * by the caller.
> + */
> + if (sock->type != SOCK_STREAM)
> + return -ENOTSUPP;
> +
> + bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> + spin_lock(&bedata->pvcallss_lock);
> + req_id = bedata->ring.req_prod_pvt & (RING_SIZE(&bedata->ring) - 1);
> + if (RING_FULL(&bedata->ring) ||
> + READ_ONCE(bedata->rsp[req_id].req_id) != PVCALLS_INVALID_ID) {
> + spin_unlock(&bedata->pvcallss_lock);
> + return -EAGAIN;
> + }
> + req = RING_GET_REQUEST(&bedata->ring, req_id);
> + req->req_id = req_id;
> + req->cmd = PVCALLS_SOCKET;
> + req->u.socket.id = (uint64_t) sock;
> + req->u.socket.domain = AF_INET;
> + req->u.socket.type = SOCK_STREAM;
> + req->u.socket.protocol = 0;
> +
> + bedata->ring.req_prod_pvt++;
> + RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&bedata->ring, notify);
> + spin_unlock(&bedata->pvcallss_lock);
> + if (notify)
> + notify_remote_via_irq(bedata->irq);
> +
> + if (wait_event_interruptible(bedata->inflight_req,
> + READ_ONCE(bedata->rsp[req_id].req_id) == req_id) != 0)
"!= 0" can be dropped
-boris
> + return -EINTR;
> +
> + ret = bedata->rsp[req_id].ret;
> + /* read ret, then set this rsp slot to be reused */
> + smp_mb();
> + WRITE_ONCE(bedata->rsp[req_id].req_id, PVCALLS_INVALID_ID);
> +
> + return ret;
> +}
> +
> static const struct xenbus_device_id pvcalls_front_ids[] = {
> { "pvcalls" },
> { "" }
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> new file mode 100644
> index 0000000..b7dabed
> --- /dev/null
> +++ b/drivers/xen/pvcalls-front.h
> @@ -0,0 +1,8 @@
> +#ifndef __PVCALLS_FRONT_H__
> +#define __PVCALLS_FRONT_H__
> +
> +#include <linux/net.h>
> +
> +int pvcalls_front_socket(struct socket *sock);
> +
> +#endif
next prev parent reply other threads:[~2017-07-26 14:28 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-25 21:21 [PATCH v2 00/13] introduce the Xen PV Calls frontend Stefano Stabellini
2017-07-25 21:21 ` [PATCH v2 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-25 21:21 ` [PATCH v2 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-26 13:35 ` Boris Ostrovsky
2017-07-27 0:26 ` Stefano Stabellini
2017-07-27 15:07 ` Boris Ostrovsky
2017-07-31 21:55 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 03/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-07-26 14:27 ` Boris Ostrovsky [this message]
2017-07-26 23:19 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-26 14:51 ` Boris Ostrovsky
2017-07-26 23:22 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-26 14:56 ` Boris Ostrovsky
2017-07-26 23:59 ` Stefano Stabellini
2017-07-27 14:43 ` Boris Ostrovsky
2017-07-31 22:17 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-26 17:52 ` Boris Ostrovsky
2017-07-26 23:24 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-26 21:21 ` Boris Ostrovsky
2017-07-26 21:33 ` [Xen-devel] " Boris Ostrovsky
2017-07-27 0:08 ` Stefano Stabellini
2017-07-27 14:59 ` Boris Ostrovsky
2017-07-31 22:26 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-26 23:23 ` Boris Ostrovsky
2017-07-27 0:21 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-27 18:39 ` Boris Ostrovsky
2017-07-31 22:34 ` Stefano Stabellini
2017-08-01 15:23 ` Boris Ostrovsky
2017-08-01 15:34 ` Juergen Gross
2017-08-01 15:57 ` Boris Ostrovsky
2017-09-11 23:56 ` Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-25 21:22 ` [PATCH v2 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5978A6E3.7010809@oracle.com \
--to=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sstabellini@kernel.org \
--cc=stefano@aporeto.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome