Re: [PATCH v1 1/6] dt-bindings: gpio: realtek-otto: Add rtl9300 compatible

[Sander Vanheule <sander@svanheule.net>]

Hi Krzysztof, 

On Sun, 2022-04-10 at 16:16 +0200, Krzysztof Kozlowski wrote:
> On 09/04/2022 21:55, Sander Vanheule wrote:
> > Add the "realtek,rlt9300-gpio", "realtek,otto-gpio" compatible for GPIO
> > nodes on the RTL930x SoC series. This SoC requires an extra register
> > range, defining the interrupt CPU mapping registers.
> > 
> > Signed-off-by: Sander Vanheule <sander@svanheule.net>
> > ---
> >  .../bindings/gpio/realtek,otto-gpio.yaml      | 33 +++++++++++++++++--
> >  1 file changed, 31 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> > b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> > index 100f20cebd76..3c511e9af377 100644
> > --- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> > +++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
> > @@ -28,10 +28,10 @@ properties:
> >        - enum:
> >            - realtek,rtl8380-gpio
> >            - realtek,rtl8390-gpio
> > +          - realtek,rtl9300-gpio
> >        - const: realtek,otto-gpio
> >  
> > -  reg:
> > -    maxItems: 1
> > +  reg: true
> >  
> >    "#gpio-cells":
> >      const: 2
> > @@ -50,6 +50,23 @@ properties:
> >    interrupts:
> >      maxItems: 1
> >  
> > +if:
> 
> You could put it under allOf:, so if you ever need to extend it, you
> don't mess with the indentation, but it's fine as it is.
> 
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Thanks for the review. I'll probably need to send a v2 of the series, so I'll update the
indentation too. The commit messages have a typo ('rlt9300' and 'rlt9310') that needs to
be fixed anyway.

Best,
Sander