* [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor
@ 2017-08-15 16:32 Harvey Hunt
2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Harvey Hunt @ 2017-08-15 16:32 UTC (permalink / raw)
To: robh+dt, mark.rutland, ralf, john
Cc: Harvey Hunt, linux-kernel, devicetree, linux-mips
VoCore are a manufacturer of devices such as the VoCore2.
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index daf465be..f6e3716 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -353,6 +353,7 @@ variscite Variscite Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
vivante Vivante Corporation
+vocore VoCore Studio
voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
wetek WeTek Electronics, limited.
--
2.7.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 2/3] MIPS: dts: Add VoCore2 board 2017-08-15 16:32 [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Harvey Hunt @ 2017-08-15 16:32 ` Harvey Hunt 2017-08-17 10:05 ` kbuild test robot 2017-08-17 21:36 ` Rob Herring 2017-08-15 16:32 ` [PATCH 3/3] MIPS: configs: Add VoCore2 defconfig Harvey Hunt 2017-08-17 21:35 ` [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Rob Herring 2 siblings, 2 replies; 7+ messages in thread From: Harvey Hunt @ 2017-08-15 16:32 UTC (permalink / raw) To: robh+dt, mark.rutland, ralf, john Cc: Harvey Hunt, linux-kernel, devicetree, linux-mips The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB flash and multiple external peripherals. This initial DTS provides enough support to get to userland and use the USB port. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org --- MAINTAINERS | 6 ++++++ arch/mips/boot/dts/ralink/Makefile | 1 + arch/mips/boot/dts/ralink/vocore2.dts | 18 ++++++++++++++++++ arch/mips/ralink/Kconfig | 5 +++++ 4 files changed, 30 insertions(+) create mode 100644 arch/mips/boot/dts/ralink/vocore2.dts diff --git a/MAINTAINERS b/MAINTAINERS index 6f7721d..82dcc6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14127,6 +14127,12 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/vmxnet3/ +VOCORE VOCORE2 BOARD +M: Harvey Hunt <harveyhuntnexus@gmail.com> +L: linux-mips@linux-mips.org +S: Maintained +F: arch/mips/boot/dts/ralink/vocore2.dts + VOLTAGE AND CURRENT REGULATOR FRAMEWORK M: Liam Girdwood <lgirdwood@gmail.com> M: Mark Brown <broonie@kernel.org> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile index 2a72259..a191788 100644 --- a/arch/mips/boot/dts/ralink/Makefile +++ b/arch/mips/boot/dts/ralink/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb +dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts new file mode 100644 index 0000000..7591340 --- /dev/null +++ b/arch/mips/boot/dts/ralink/vocore2.dts @@ -0,0 +1,18 @@ +/dts-v1/; + +#include "mt7628a.dtsi" + +/ { + compatible = "vocore,vocore2", "ralink,mt7628a-soc"; + model = "VoCore2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = "serial2:115200"; + }; +}; diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 710b04c..c2b2c2d 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -82,6 +82,11 @@ choice depends on SOC_MT7620 select BUILTIN_DTB + config DTB_VOCORE2 + bool "VoCore2" + depends on SOC_MT7620 + select BUILTIN_DTB + endchoice endif -- 2.7.4 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] MIPS: dts: Add VoCore2 board 2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt @ 2017-08-17 10:05 ` kbuild test robot 2017-08-17 21:36 ` Rob Herring 1 sibling, 0 replies; 7+ messages in thread From: kbuild test robot @ 2017-08-17 10:05 UTC (permalink / raw) To: Harvey Hunt Cc: kbuild-all, robh+dt, mark.rutland, ralf, john, Harvey Hunt, linux-kernel, devicetree, linux-mips [-- Attachment #1: Type: text/plain, Size: 1187 bytes --] Hi Harvey, [auto build test ERROR on linus/master] [also build test ERROR on v4.13-rc5 next-20170816] [cannot apply to robh/for-next] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Harvey-Hunt/dt-bindings-vendors-Add-VoCore-as-a-vendor/20170817-150402 config: mips-xilfpga_defconfig (attached as .config) compiler: mipsel-linux-gnu-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=mips All errors (new ones prefixed by >>): >> arch/mips/boot/dts/ralink/vocore2.dts:3:24: fatal error: mt7628a.dtsi: No such file or directory #include "mt7628a.dtsi" ^ compilation terminated. vim +3 arch/mips/boot/dts/ralink/vocore2.dts 2 > 3 #include "mt7628a.dtsi" 4 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation [-- Attachment #2: .config.gz --] [-- Type: application/gzip, Size: 11044 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] MIPS: dts: Add VoCore2 board 2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt 2017-08-17 10:05 ` kbuild test robot @ 2017-08-17 21:36 ` Rob Herring 2017-08-18 13:21 ` Harvey Hunt 1 sibling, 1 reply; 7+ messages in thread From: Rob Herring @ 2017-08-17 21:36 UTC (permalink / raw) To: Harvey Hunt Cc: mark.rutland, ralf, john, linux-kernel, devicetree, linux-mips On Tue, Aug 15, 2017 at 05:32:52PM +0100, Harvey Hunt wrote: > The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB > flash and multiple external peripherals. > > This initial DTS provides enough support to get to userland and use the USB > port. > > Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> > Cc: linux-kernel@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-mips@linux-mips.org > --- > MAINTAINERS | 6 ++++++ > arch/mips/boot/dts/ralink/Makefile | 1 + > arch/mips/boot/dts/ralink/vocore2.dts | 18 ++++++++++++++++++ > arch/mips/ralink/Kconfig | 5 +++++ > 4 files changed, 30 insertions(+) > create mode 100644 arch/mips/boot/dts/ralink/vocore2.dts > > diff --git a/MAINTAINERS b/MAINTAINERS > index 6f7721d..82dcc6f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14127,6 +14127,12 @@ L: netdev@vger.kernel.org > S: Maintained > F: drivers/net/vmxnet3/ > > +VOCORE VOCORE2 BOARD > +M: Harvey Hunt <harveyhuntnexus@gmail.com> > +L: linux-mips@linux-mips.org > +S: Maintained > +F: arch/mips/boot/dts/ralink/vocore2.dts > + > VOLTAGE AND CURRENT REGULATOR FRAMEWORK > M: Liam Girdwood <lgirdwood@gmail.com> > M: Mark Brown <broonie@kernel.org> > diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile > index 2a72259..a191788 100644 > --- a/arch/mips/boot/dts/ralink/Makefile > +++ b/arch/mips/boot/dts/ralink/Makefile > @@ -2,6 +2,7 @@ dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb > dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb > dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb > dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb > +dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb > > obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) > > diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts > new file mode 100644 > index 0000000..7591340 > --- /dev/null > +++ b/arch/mips/boot/dts/ralink/vocore2.dts > @@ -0,0 +1,18 @@ > +/dts-v1/; > + > +#include "mt7628a.dtsi" > + > +/ { > + compatible = "vocore,vocore2", "ralink,mt7628a-soc"; Is vocore,vocore2 documented? > + model = "VoCore2"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x8000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS2,115200"; > + stdout-path = "serial2:115200"; > + }; > +}; > diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig > index 710b04c..c2b2c2d 100644 > --- a/arch/mips/ralink/Kconfig > +++ b/arch/mips/ralink/Kconfig > @@ -82,6 +82,11 @@ choice > depends on SOC_MT7620 > select BUILTIN_DTB > > + config DTB_VOCORE2 > + bool "VoCore2" > + depends on SOC_MT7620 > + select BUILTIN_DTB > + > endchoice > > endif > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] MIPS: dts: Add VoCore2 board 2017-08-17 21:36 ` Rob Herring @ 2017-08-18 13:21 ` Harvey Hunt 0 siblings, 0 replies; 7+ messages in thread From: Harvey Hunt @ 2017-08-18 13:21 UTC (permalink / raw) To: Rob Herring Cc: mark.rutland, ralf, john, linux-kernel, devicetree, linux-mips Hi Rob, Thanks for the review. On 17/08/17 22:36, Rob Herring wrote: > On Tue, Aug 15, 2017 at 05:32:52PM +0100, Harvey Hunt wrote: >> The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB >> flash and multiple external peripherals. >> >> This initial DTS provides enough support to get to userland and use the USB >> port. >> >> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> >> Cc: linux-kernel@vger.kernel.org >> Cc: devicetree@vger.kernel.org >> Cc: linux-mips@linux-mips.org >> --- >> MAINTAINERS | 6 ++++++ >> arch/mips/boot/dts/ralink/Makefile | 1 + >> arch/mips/boot/dts/ralink/vocore2.dts | 18 ++++++++++++++++++ >> arch/mips/ralink/Kconfig | 5 +++++ >> 4 files changed, 30 insertions(+) >> create mode 100644 arch/mips/boot/dts/ralink/vocore2.dts >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 6f7721d..82dcc6f 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -14127,6 +14127,12 @@ L: netdev@vger.kernel.org >> S: Maintained >> F: drivers/net/vmxnet3/ >> >> +VOCORE VOCORE2 BOARD >> +M: Harvey Hunt <harveyhuntnexus@gmail.com> >> +L: linux-mips@linux-mips.org >> +S: Maintained >> +F: arch/mips/boot/dts/ralink/vocore2.dts >> + >> VOLTAGE AND CURRENT REGULATOR FRAMEWORK >> M: Liam Girdwood <lgirdwood@gmail.com> >> M: Mark Brown <broonie@kernel.org> >> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile >> index 2a72259..a191788 100644 >> --- a/arch/mips/boot/dts/ralink/Makefile >> +++ b/arch/mips/boot/dts/ralink/Makefile >> @@ -2,6 +2,7 @@ dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb >> dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb >> dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb >> dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb >> +dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb >> >> obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) >> >> diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts >> new file mode 100644 >> index 0000000..7591340 >> --- /dev/null >> +++ b/arch/mips/boot/dts/ralink/vocore2.dts >> @@ -0,0 +1,18 @@ >> +/dts-v1/; >> + >> +#include "mt7628a.dtsi" >> + >> +/ { >> + compatible = "vocore,vocore2", "ralink,mt7628a-soc"; > > Is vocore,vocore2 documented? It's not, do you want me to add a file in Documentation/devicetree/bindings/mips? If so, shall I just create a vocore.txt file or create a "vocore" directory with vocore2.txt in it? Thanks, Harvey > >> + model = "VoCore2"; >> + >> + memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x8000000>; >> + }; >> + >> + chosen { >> + bootargs = "console=ttyS2,115200"; >> + stdout-path = "serial2:115200"; >> + }; >> +}; >> diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig >> index 710b04c..c2b2c2d 100644 >> --- a/arch/mips/ralink/Kconfig >> +++ b/arch/mips/ralink/Kconfig >> @@ -82,6 +82,11 @@ choice >> depends on SOC_MT7620 >> select BUILTIN_DTB >> >> + config DTB_VOCORE2 >> + bool "VoCore2" >> + depends on SOC_MT7620 >> + select BUILTIN_DTB >> + >> endchoice >> >> endif >> -- >> 2.7.4 >> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/3] MIPS: configs: Add VoCore2 defconfig 2017-08-15 16:32 [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Harvey Hunt 2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt @ 2017-08-15 16:32 ` Harvey Hunt 2017-08-17 21:35 ` [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Rob Herring 2 siblings, 0 replies; 7+ messages in thread From: Harvey Hunt @ 2017-08-15 16:32 UTC (permalink / raw) To: robh+dt, mark.rutland, ralf, john; +Cc: Harvey Hunt, linux-kernel, linux-mips Enabled supported drivers, including: - USB PHY - EHCI - UART Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org --- arch/mips/configs/vocore2_defconfig | 130 ++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 arch/mips/configs/vocore2_defconfig diff --git a/arch/mips/configs/vocore2_defconfig b/arch/mips/configs/vocore2_defconfig new file mode 100644 index 0000000..c5e0b2e --- /dev/null +++ b/arch/mips/configs/vocore2_defconfig @@ -0,0 +1,130 @@ +CONFIG_RALINK=y +CONFIG_SOC_MT7620=y +CONFIG_DTB_VOCORE2=y +CONFIG_CPU_MIPS32_R2=y +# CONFIG_COMPACTION is not set +CONFIG_HZ_100=y +CONFIG_PREEMPT=y +# CONFIG_SECCOMP is not set +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_MEMCG=y +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +# CONFIG_FW_LOADER is not set +# CONFIG_ALLOW_DEV_COREDUMP is not set +CONFIG_NETDEVICES=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_LEGACY_PTY_COUNT=2 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_MMC=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_MEMORY=y +CONFIG_PHY_RALINK_USB=y +# CONFIG_DNOTIFY is not set +CONFIG_PROC_KCORE=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_STACKTRACE=y +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRC16=y +CONFIG_XZ_DEC=y -- 2.7.4 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor 2017-08-15 16:32 [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Harvey Hunt 2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt 2017-08-15 16:32 ` [PATCH 3/3] MIPS: configs: Add VoCore2 defconfig Harvey Hunt @ 2017-08-17 21:35 ` Rob Herring 2 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2017-08-17 21:35 UTC (permalink / raw) To: Harvey Hunt Cc: mark.rutland, ralf, john, linux-kernel, devicetree, linux-mips On Tue, Aug 15, 2017 at 05:32:51PM +0100, Harvey Hunt wrote: > VoCore are a manufacturer of devices such as the VoCore2. > > Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> > Cc: linux-kernel@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-mips@linux-mips.org > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-08-18 13:22 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-08-15 16:32 [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Harvey Hunt 2017-08-15 16:32 ` [PATCH 2/3] MIPS: dts: Add VoCore2 board Harvey Hunt 2017-08-17 10:05 ` kbuild test robot 2017-08-17 21:36 ` Rob Herring 2017-08-18 13:21 ` Harvey Hunt 2017-08-15 16:32 ` [PATCH 3/3] MIPS: configs: Add VoCore2 defconfig Harvey Hunt 2017-08-17 21:35 ` [PATCH 1/3] dt-bindings: vendors: Add VoCore as a vendor Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®