Re: [PATCH v2] ieee802154: atusb: fix uninit value in atusb_set_extended_addr

[Pavel Skripkin <paskripkin@gmail.com>]

On 1/4/22 18:40, Stefan Schmidt wrote:
> 
> It compiles, but does not work on the real hardware.
> 
> [    1.114698] usb 1-1: new full-speed USB device number 2 using uhci_hcd
> [    1.261691] usb 1-1: New USB device found, idVendor=20b7,
> idProduct=1540, bcdDevice= 0.01
> [    1.263421] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [    1.264952] usb 1-1: SerialNumber: 4630333438371502231a
> [    1.278042] usb 1-1: ATUSB: AT86RF231 version 2
> [    1.281087] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
> ATUSB (2)
> [    1.285191] usb 1-1: atusb_control_msg: req 0x01 val 0x0 idx 0x0,
> error -61
> [    1.286903] usb 1-1: failed to fetch extended address, random address set
> [    1.288757] usb 1-1: atusb_probe: initialization failed, error = -61
> [    1.290922] atusb: probe of 1-1:1.0 failed with error -61
> 
> 
> Without your patch it works as expected:
> 
> [    1.091925] usb 1-1: new full-speed USB device number 2 using uhci_hcd
> [    1.237743] usb 1-1: New USB device found, idVendor=20b7,
> idProduct=1540, bcdDevice= 0.01
> [    1.239788] usb 1-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [    1.241432] usb 1-1: SerialNumber: 4630333438371502231a
> [    1.255012] usb 1-1: ATUSB: AT86RF231 version 2
> [    1.258073] usb 1-1: Firmware: major: 0, minor: 3, hardware type:
> ATUSB (2)
> [    1.262170] usb 1-1: Firmware: build #132 Mo 28. Nov 16:20:35 CET 2016
> [    1.266195] usb 1-1: Read permanent extended address
> 10:e2:d5:ff:ff:00:02:e8 from device
> 

Hi Stefan,

thanks for testing on real hw.

It looks like there is corner case, that Greg mentioned in this thread. 
atusb_get_and_show_build() reads firmware build info, which may have 
various length.

Maybe we can change atusb_control_msg() to usb_control_msg() in 
atusb_get_and_show_build(), since other callers do not have this problem



With regards,
Pavel Skripkin