* [PATCH] dmaengine: ioat setting ioat timeout as module parameter
@ 2020-07-01 14:08 leonid.ravich
2020-07-01 14:25 ` Dave Jiang
2020-07-01 18:48 ` [PATCH v2] " leonid.ravich
0 siblings, 2 replies; 5+ messages in thread
From: leonid.ravich @ 2020-07-01 14:08 UTC (permalink / raw)
To: dmaengine
Cc: lravich, Leonid Ravich, Dan Williams, Vinod Koul, Dave Jiang,
Alexander.Barabash, linux-kernel
From: Leonid Ravich <Leonid.Ravich@emc.com>
DMA transaction time to complition is a function of
PCI bandwidth,transaction size and a queue depth.
So hard coded value for timeouts might be wrong
for some scenarios.
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
---
drivers/dma/ioat/dma.c | 12 ++++++++++++
drivers/dma/ioat/dma.h | 2 --
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 8ad0ad861c86..7621b5be5cf4 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -26,6 +26,18 @@
#include "../dmaengine.h"
+int complition_timeout = 200;
+module_param(complition_timeout, int, 0644);
+MODULE_PARM_DESC(complition_timeout,
+ "set ioat complition timeout [msec] (default 200 [msec])");
+int idle_timeout = 2000;
+module_param(idle_timeout, int, 0644);
+MODULE_PARM_DESC(idle_timeout,
+ "set ioat idel timeout [msec] (default 2000 [msec])");
+
+#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout)
+#define COMPLETION_TIMEOUT msecs_to_jiffies(complition_timeout)
+
static char *chanerr_str[] = {
"DMA Transfer Source Address Error",
"DMA Transfer Destination Address Error",
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index e6b622e1ba92..f7f31fdf14cf 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -104,8 +104,6 @@ struct ioatdma_chan {
#define IOAT_RUN 5
#define IOAT_CHAN_ACTIVE 6
struct timer_list timer;
- #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
- #define IDLE_TIMEOUT msecs_to_jiffies(2000)
#define RESET_DELAY msecs_to_jiffies(100)
struct ioatdma_device *ioat_dma;
dma_addr_t completion_dma;
--
2.16.2
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] dmaengine: ioat setting ioat timeout as module parameter
2020-07-01 14:08 [PATCH] dmaengine: ioat setting ioat timeout as module parameter leonid.ravich
@ 2020-07-01 14:25 ` Dave Jiang
2020-07-01 18:48 ` [PATCH v2] " leonid.ravich
1 sibling, 0 replies; 5+ messages in thread
From: Dave Jiang @ 2020-07-01 14:25 UTC (permalink / raw)
To: leonid.ravich, dmaengine
Cc: lravich, Dan Williams, Vinod Koul, Alexander.Barabash, linux-kernel
On 7/1/2020 7:08 AM, leonid.ravich@dell.com wrote:
> From: Leonid Ravich <Leonid.Ravich@emc.com>
>
> DMA transaction time to complition is a function of
completion
> PCI bandwidth,transaction size and a queue depth.
^ space channel depth. ioat doesn't have queues.
> So hard coded value for timeouts might be wrong
> for some scenarios.
>
> Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
> ---
> drivers/dma/ioat/dma.c | 12 ++++++++++++
> drivers/dma/ioat/dma.h | 2 --
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
> index 8ad0ad861c86..7621b5be5cf4 100644
> --- a/drivers/dma/ioat/dma.c
> +++ b/drivers/dma/ioat/dma.c
> @@ -26,6 +26,18 @@
>
> #include "../dmaengine.h"
>
> +int complition_timeout = 200;
> +module_param(complition_timeout, int, 0644);
> +MODULE_PARM_DESC(complition_timeout,
> + "set ioat complition timeout [msec] (default 200 [msec])");
completion_timeout
> +int idle_timeout = 2000;
> +module_param(idle_timeout, int, 0644);
> +MODULE_PARM_DESC(idle_timeout,
> + "set ioat idel timeout [msec] (default 2000 [msec])");
> +
> +#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout)
> +#define COMPLETION_TIMEOUT msecs_to_jiffies(complition_timeout)
> +
> static char *chanerr_str[] = {
> "DMA Transfer Source Address Error",
> "DMA Transfer Destination Address Error",
> diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
> index e6b622e1ba92..f7f31fdf14cf 100644
> --- a/drivers/dma/ioat/dma.h
> +++ b/drivers/dma/ioat/dma.h
> @@ -104,8 +104,6 @@ struct ioatdma_chan {
> #define IOAT_RUN 5
> #define IOAT_CHAN_ACTIVE 6
> struct timer_list timer;
> - #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
> - #define IDLE_TIMEOUT msecs_to_jiffies(2000)
> #define RESET_DELAY msecs_to_jiffies(100)
> struct ioatdma_device *ioat_dma;
> dma_addr_t completion_dma;
>
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v2] dmaengine: ioat setting ioat timeout as module parameter
2020-07-01 14:08 [PATCH] dmaengine: ioat setting ioat timeout as module parameter leonid.ravich
2020-07-01 14:25 ` Dave Jiang
@ 2020-07-01 18:48 ` leonid.ravich
2020-07-01 19:04 ` Dave Jiang
2020-07-06 5:18 ` Vinod Koul
1 sibling, 2 replies; 5+ messages in thread
From: leonid.ravich @ 2020-07-01 18:48 UTC (permalink / raw)
To: dmaengine
Cc: lravich, Leonid Ravich, Dan Williams, Vinod Koul, Dave Jiang,
Alexander.Barabash, linux-kernel
From: Leonid Ravich <Leonid.Ravich@emc.com>
DMA transaction time to completion is a function of
PCI bandwidth,transaction size and a queue depth.
So hard coded value for timeouts might be wrong
for some scenarios.
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
---
Changing in v2
- misspelling of completion
drivers/dma/ioat/dma.c | 12 ++++++++++++
drivers/dma/ioat/dma.h | 2 --
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 8ad0ad861c86..fd782aee02d9 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -26,6 +26,18 @@
#include "../dmaengine.h"
+int completion_timeout = 200;
+module_param(completion_timeout, int, 0644);
+MODULE_PARM_DESC(completion_timeout,
+ "set ioat completion timeout [msec] (default 200 [msec])");
+int idle_timeout = 2000;
+module_param(idle_timeout, int, 0644);
+MODULE_PARM_DESC(idle_timeout,
+ "set ioat idel timeout [msec] (default 2000 [msec])");
+
+#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout)
+#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout)
+
static char *chanerr_str[] = {
"DMA Transfer Source Address Error",
"DMA Transfer Destination Address Error",
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index e6b622e1ba92..f7f31fdf14cf 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -104,8 +104,6 @@ struct ioatdma_chan {
#define IOAT_RUN 5
#define IOAT_CHAN_ACTIVE 6
struct timer_list timer;
- #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
- #define IDLE_TIMEOUT msecs_to_jiffies(2000)
#define RESET_DELAY msecs_to_jiffies(100)
struct ioatdma_device *ioat_dma;
dma_addr_t completion_dma;
--
2.16.2
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] dmaengine: ioat setting ioat timeout as module parameter
2020-07-01 18:48 ` [PATCH v2] " leonid.ravich
@ 2020-07-01 19:04 ` Dave Jiang
2020-07-06 5:18 ` Vinod Koul
1 sibling, 0 replies; 5+ messages in thread
From: Dave Jiang @ 2020-07-01 19:04 UTC (permalink / raw)
To: leonid.ravich, dmaengine
Cc: lravich, Dan Williams, Vinod Koul, Alexander.Barabash, linux-kernel
On 7/1/2020 11:48 AM, leonid.ravich@dell.com wrote:
> From: Leonid Ravich <Leonid.Ravich@emc.com>
>
> DMA transaction time to completion is a function of
> PCI bandwidth,transaction size and a queue depth.
> So hard coded value for timeouts might be wrong
> for some scenarios.
>
> Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> Changing in v2
> - misspelling of completion
> drivers/dma/ioat/dma.c | 12 ++++++++++++
> drivers/dma/ioat/dma.h | 2 --
> 2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
> index 8ad0ad861c86..fd782aee02d9 100644
> --- a/drivers/dma/ioat/dma.c
> +++ b/drivers/dma/ioat/dma.c
> @@ -26,6 +26,18 @@
>
> #include "../dmaengine.h"
>
> +int completion_timeout = 200;
> +module_param(completion_timeout, int, 0644);
> +MODULE_PARM_DESC(completion_timeout,
> + "set ioat completion timeout [msec] (default 200 [msec])");
> +int idle_timeout = 2000;
> +module_param(idle_timeout, int, 0644);
> +MODULE_PARM_DESC(idle_timeout,
> + "set ioat idel timeout [msec] (default 2000 [msec])");
> +
> +#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout)
> +#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout)
> +
> static char *chanerr_str[] = {
> "DMA Transfer Source Address Error",
> "DMA Transfer Destination Address Error",
> diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
> index e6b622e1ba92..f7f31fdf14cf 100644
> --- a/drivers/dma/ioat/dma.h
> +++ b/drivers/dma/ioat/dma.h
> @@ -104,8 +104,6 @@ struct ioatdma_chan {
> #define IOAT_RUN 5
> #define IOAT_CHAN_ACTIVE 6
> struct timer_list timer;
> - #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
> - #define IDLE_TIMEOUT msecs_to_jiffies(2000)
> #define RESET_DELAY msecs_to_jiffies(100)
> struct ioatdma_device *ioat_dma;
> dma_addr_t completion_dma;
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] dmaengine: ioat setting ioat timeout as module parameter
2020-07-01 18:48 ` [PATCH v2] " leonid.ravich
2020-07-01 19:04 ` Dave Jiang
@ 2020-07-06 5:18 ` Vinod Koul
1 sibling, 0 replies; 5+ messages in thread
From: Vinod Koul @ 2020-07-06 5:18 UTC (permalink / raw)
To: leonid.ravich
Cc: dmaengine, lravich, Dan Williams, Dave Jiang, Alexander.Barabash,
linux-kernel
On 01-07-20, 21:48, leonid.ravich@dell.com wrote:
> From: Leonid Ravich <Leonid.Ravich@emc.com>
>
> DMA transaction time to completion is a function of
> PCI bandwidth,transaction size and a queue depth.
space after , pls
> So hard coded value for timeouts might be wrong
> for some scenarios.
I ahve fixed above and applied
--
~Vinod
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-06 5:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-01 14:08 [PATCH] dmaengine: ioat setting ioat timeout as module parameter leonid.ravich
2020-07-01 14:25 ` Dave Jiang
2020-07-01 18:48 ` [PATCH v2] " leonid.ravich
2020-07-01 19:04 ` Dave Jiang
2020-07-06 5:18 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome