* [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15
@ 2025-03-12 13:43 Vignesh Raghavendra
2025-03-12 13:46 ` [GIT PULL 2/2] arm64: defconfig: Updates for v6.15 for TI K3 platforms Vignesh Raghavendra
0 siblings, 1 reply; 2+ messages in thread
From: Vignesh Raghavendra @ 2025-03-12 13:43 UTC (permalink / raw)
To: Olof Johansson, Arnd Bergmann, arm-soc, SoC
Cc: Tero Kristo, linux-arm-kernel, linux-kernel, Nishanth Menon
Hi ARM SoC Maintainers,
The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b:
Linux 6.14-rc1 (2025-02-02 15:39:26 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.15
for you to fetch changes up to 377fde74eae4abcbcd5475676d58fb595a07ff85:
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style (2025-03-07 18:48:05 +0530)
----------------------------------------------------------------
TI K3 device tree updates for v6.15
Generic Fixups/Cleanups:
SoC Specific features and Fixes:
AM62Ax:
Enable MCU domain pinctrl node
J784S4/J742S4:
GICD reg size fixes
Serdes lane ctrl reg mux mask fix
AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support
Board Specific:
J784S4:
EVM: Cleanup duplicate gpio-hogs
J722S:
TypeC port mux selection fix
AM62Ax
SK: boot-phase tag to support USB bootmode
RTC support
Aliases for wakeup and MCU serial UARTs
AM62P
SK: boot-phase tag to support USB bootmode
USB wakeup support
Aliases for wakeup and MCU serial UARTs
AM62:
verdin-dahila: microphone support
SK: Aliases for wakeup and MCU serial UARTs
BeaglePlay: reserved CMA region for Multimedia applications
J721e:
SK/EVM: boot-phase tags for Serdes for DFU boot
Phytech board updates:
Boot-phase tag updates for AM64/AM62/AM62A boards
DTS coding style cleanups
RTOS IPC reserved-memory additions
DT overlay for X27 Connectors on AM64 SOMs
J721S2 SOM:
Add flash partitions
----------------------------------------------------------------
Daniel Schultz (1):
arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector
Francesco Dolcini (1):
arm64: dts: ti: k3-am62p: Enable AUDIO_REFCLKx
Hrushikesh Salunke (1):
arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C
Jayesh Choudhary (1):
arm64: dts: ti: k3-j784s4-evm-quad-port-eth-exp1: Remove duplicate hogs
Keerthy (1):
arm64: dts: ti: k3-j784s4-j742s2-main-common: Correct the GICD size
Markus Schneider-Pargmann (2):
arm64: dts: ti: k3-am62x-sk-common: Add serial aliases
arm64: dts: ti: k3-am62a7-sk: Add serial alias
Michael Walle (2):
arm64: dts: ti: k3-am62p: fix pinctrl settings
arm64: dts: ti: k3-j722s: fix pinctrl settings
Nishanth Menon (1):
arm64: dts: ti: k3-am625-beagleplay: Reserve 128MiB of global CMA
Sai Sree Kartheek Adivi (1):
arm64: dts: ti: k3-am62a-mcu: enable mcu domain pinmux
Siddharth Vadapalli (6):
arm64: dts: ti: k3-am62a7-sk: Add boot phase tag for USB0
arm64: dts: ti: k3-am62p5-sk: Add boot phase tag for USB0
arm64: dts: ti: k3-j721e-common-proc-board: Add boot phase tag to SERDES3
arm64: dts: ti: k3-j721e-sk: Add boot phase tag to SERDES3
arm64: dts: ti: k3-am62p5-sk: Support SoC wakeup using USB1 wakeup
arm64: dts: ti: k3-j784s4-j742s2-main-common: Fix serdes_ln_ctrl reg-masks
Stefan Eichenberger (1):
arm64: dts: ti: k3-am62-verdin-dahlia: add Microphone Jack to sound card
Udit Kumar (1):
arm64: dts: ti: k3-j721s2-som-p0: Add flash partition details
Vaishnav Achath (3):
arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
arm64: dts: ti: k3-j722s-evm: Add camera peripherals
Vibhore Vardhan (3):
arm64: dts: ti: k3-am62a7-sk: Add alias for RTC
arm64: dts: ti: k3-am62p-j722s-common-wakeup: Configure ti-sysc for wkup_uart0
arm64: dts: ti: k3-am62p5-sk: Add serial alias
Wadim Egorov (7):
arm64: dts: ti: k3-am64-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62-phycore-som: Reserve RTOS IPC memory
arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
arm64: dts: ti: k3-am62a-phycore-som: Add boot phase tags
arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style
arm64: dts: ti: k3-am62a-phycore-som: Reorder properties per DTS coding style
arch/arm64/boot/dts/ti/Makefile | 3 +
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 25 +-
arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 8 +
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 19 +-
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 4 +
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 8 -
arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi | 36 +-
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 26 +-
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 9 +
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +
arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 33 +-
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 19 +-
.../ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso | 63 +++
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 41 ++
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 30 +-
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 208 +++++++++-
arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 7 -
arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi | 6 +-
23 files changed, 488 insertions(+), 72 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
--
Regards
Vignesh
https://ti.com/opensource
^ permalink raw reply [flat|nested] 2+ messages in thread
* [GIT PULL 2/2] arm64: defconfig: Updates for v6.15 for TI K3 platforms
2025-03-12 13:43 [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15 Vignesh Raghavendra
@ 2025-03-12 13:46 ` Vignesh Raghavendra
0 siblings, 0 replies; 2+ messages in thread
From: Vignesh Raghavendra @ 2025-03-12 13:46 UTC (permalink / raw)
To: Olof Johansson, Arnd Bergmann, arm-soc, SoC
Cc: Tero Kristo, linux-arm-kernel, linux-kernel, Nishanth Menon
The following changes since commit c7691aec5e991cec9c5c5fdab08c24856a1fc56f:
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator (2025-02-06 09:10:24 +0530)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-config-for-v6.15
for you to fetch changes up to 75a41c26351a77cd5dd01e14d059eaf11358689c:
arm64: defconfig: Enable SPI NAND flashes (2025-03-07 16:33:25 +0530)
----------------------------------------------------------------
TI K3 defconfig updates for v6.15
- Enable Support for SPI NAND flashes on AM62Ax/J721s2 and other boards
- HSR protocol support for AM65/AM64 ICSSG based multi-port ethernet
- Greybus modules to support CC1352P7 chips on BeaglePlay
----------------------------------------------------------------
Ayush Singh (1):
arm64: defconfig: Enable gb_beagleplay
Ravi Gunasekaran (1):
arm64: defconfig: Enable HSR protocol driver
Santhosh Kumar K (1):
arm64: defconfig: Enable SPI NAND flashes
arch/arm64/configs/defconfig | 4 ++++
1 file changed, 4 insertions(+)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-03-12 13:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-03-12 13:43 [GIT PULL 1/2] arm64: dts: ti: K3 devicetree updates for v6.15 Vignesh Raghavendra
2025-03-12 13:46 ` [GIT PULL 2/2] arm64: defconfig: Updates for v6.15 for TI K3 platforms Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®