[PATCH 01/18] ARM/smp_twd: Migrate to new 'set-state' interface

[PATCH 01/18] ARM/smp_twd: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate smp_twd driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/kernel/smp_twd.c | 48 +++++++++++++++++++++++++----------------------
 1 file changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 172c6a05d27f..e9035cda1485 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -36,29 +36,30 @@ static DEFINE_PER_CPU(bool, percpu_setup_called);
 static struct clock_event_device __percpu *twd_evt;
 static int twd_ppi;
 
-static void twd_set_mode(enum clock_event_mode mode,
-			struct clock_event_device *clk)
+static int twd_shutdown(struct clock_event_device *clk)
 {
-	unsigned long ctrl;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
-			twd_base + TWD_TIMER_LOAD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
+	writel_relaxed(0, twd_base + TWD_TIMER_CONTROL);
+	return 0;
+}
 
+static int twd_set_oneshot(struct clock_event_device *clk)
+{
+	/* period set, and timer enabled in 'next_event' hook */
+	writel_relaxed(TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT,
+		       twd_base + TWD_TIMER_CONTROL);
+	return 0;
+}
+
+static int twd_set_periodic(struct clock_event_device *clk)
+{
+	unsigned long ctrl = TWD_TIMER_CONTROL_ENABLE |
+			     TWD_TIMER_CONTROL_IT_ENABLE |
+			     TWD_TIMER_CONTROL_PERIODIC;
+
+	writel_relaxed(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+		       twd_base + TWD_TIMER_LOAD);
 	writel_relaxed(ctrl, twd_base + TWD_TIMER_CONTROL);
+	return 0;
 }
 
 static int twd_set_next_event(unsigned long evt,
@@ -94,7 +95,7 @@ static void twd_timer_stop(void)
 {
 	struct clock_event_device *clk = raw_cpu_ptr(twd_evt);
 
-	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+	twd_shutdown(clk);
 	disable_percpu_irq(clk->irq);
 }
 
@@ -296,7 +297,10 @@ static void twd_timer_setup(void)
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 			CLOCK_EVT_FEAT_C3STOP;
 	clk->rating = 350;
-	clk->set_mode = twd_set_mode;
+	clk->set_state_shutdown = twd_shutdown;
+	clk->set_state_periodic = twd_set_periodic;
+	clk->set_state_oneshot = twd_set_oneshot;
+	clk->tick_resume = twd_shutdown;
 	clk->set_next_event = twd_set_next_event;
 	clk->irq = twd_ppi;
 	clk->cpumask = cpumask_of(cpu);
-- 
2.4.0

[PATCH 02/18] ARM/cns3xxx/timer: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate cns3xxx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

NOTE: We don't read TIMER1_2_CONTROL_OFFSET register on shutdown
anymore.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-cns3xxx/core.c | 55 +++++++++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 4e9837ded96d..11f9644f8f41 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -113,30 +113,33 @@ void cns3xxx_power_off(void)
  */
 static void __iomem *cns3xxx_tmr1;
 
-static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
-				   struct clock_event_device *clk)
+static int cns3xxx_shutdown(struct clock_event_device *clk)
+{
+	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
+}
+
+static int cns3xxx_set_oneshot(struct clock_event_device *clk)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* period set, and timer enabled in 'next_event' hook */
+	ctrl |= (1 << 2) | (1 << 9);
+	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
+}
+
+static int cns3xxx_set_periodic(struct clock_event_device *clk)
 {
 	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
 	int pclk = cns3xxx_cpu_clock() / 8;
 	int reload;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		reload = pclk * 20 / (3 * HZ) * 0x25000;
-		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
+	reload = pclk * 20 / (3 * HZ) * 0x25000;
+	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
 	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	return 0;
 }
 
 static int cns3xxx_timer_set_next_event(unsigned long evt,
@@ -151,12 +154,16 @@ static int cns3xxx_timer_set_next_event(unsigned long evt,
 }
 
 static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name		= "cns3xxx timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= cns3xxx_timer_set_mode,
-	.set_next_event	= cns3xxx_timer_set_next_event,
-	.rating		= 350,
-	.cpumask	= cpu_all_mask,
+	.name			= "cns3xxx timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= cns3xxx_shutdown,
+	.set_state_periodic	= cns3xxx_set_periodic,
+	.set_state_oneshot	= cns3xxx_set_oneshot,
+	.tick_resume		= cns3xxx_shutdown,
+	.set_next_event		= cns3xxx_timer_set_next_event,
+	.rating			= 350,
+	.cpumask		= cpu_all_mask,
 };
 
 static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-- 
2.4.0

[PATCH 03/18] ARM/davinci/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate davinci driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in set_mode(RESUME) and so .tick_resume()
isn't implemented.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-davinci/time.c | 54 ++++++++++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 160c9602f490..6c18445a4639 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -303,36 +303,42 @@ static int davinci_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void davinci_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *evt)
+static int davinci_shutdown(struct clock_event_device *evt)
 {
 	struct timer_s *t = &timers[TID_CLOCKEVENT];
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_PERIODIC;
-		timer32_config(t);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_DISABLED;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_DISABLED;
+	return 0;
+}
+
+static int davinci_set_oneshot(struct clock_event_device *evt)
+{
+	struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_ONESHOT;
+	return 0;
+}
+
+static int davinci_set_periodic(struct clock_event_device *evt)
+{
+	struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+	t->period = davinci_clock_tick_rate / (HZ);
+	t->opts &= ~TIMER_OPTS_STATE_MASK;
+	t->opts |= TIMER_OPTS_PERIODIC;
+	timer32_config(t);
+	return 0;
 }
 
 static struct clock_event_device clockevent_davinci = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= davinci_set_next_event,
-	.set_mode	= davinci_set_mode,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= davinci_set_next_event,
+	.set_state_shutdown	= davinci_shutdown,
+	.set_state_periodic	= davinci_set_periodic,
+	.set_state_oneshot	= davinci_set_oneshot,
 };
 
 
-- 
2.4.0

[PATCH 04/18] ARM/dc21285-timer: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate footbridge driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-footbridge/dc21285-timer.c | 48 +++++++++++++++-----------------
 1 file changed, 23 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index bf7aa7d298e7..810edc78c817 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -57,34 +57,32 @@ static int ckevt_dc21285_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *c)
+static int ckevt_dc21285_shutdown(struct clock_event_device *c)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		*CSR_TIMER1_CLR = 0;
-		*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
-		*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
-				   TIMER_CNTL_DIV16;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		*CSR_TIMER1_CNTL = 0;
-		break;
-	}
+	*CSR_TIMER1_CNTL = 0;
+	return 0;
+}
+
+static int ckevt_dc21285_set_periodic(struct clock_event_device *c)
+{
+	*CSR_TIMER1_CLR = 0;
+	*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+			   TIMER_CNTL_DIV16;
+	return 0;
 }
 
 static struct clock_event_device ckevt_dc21285 = {
-	.name		= "dc21285_timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC |
-			  CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.irq		= IRQ_TIMER1,
-	.set_next_event	= ckevt_dc21285_set_next_event,
-	.set_mode	= ckevt_dc21285_set_mode,
+	.name			= "dc21285_timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.irq			= IRQ_TIMER1,
+	.set_next_event		= ckevt_dc21285_set_next_event,
+	.set_state_shutdown	= ckevt_dc21285_shutdown,
+	.set_state_periodic	= ckevt_dc21285_set_periodic,
+	.set_state_oneshot	= ckevt_dc21285_shutdown,
+	.tick_resume		= ckevt_dc21285_set_periodic,
 };
 
 static irqreturn_t timer1_interrupt(int irq, void *dev_id)
@@ -94,7 +92,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 	*CSR_TIMER1_CLR = 0;
 
 	/* Stop the timer if in one-shot mode */
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		*CSR_TIMER1_CNTL = 0;
 
 	ce->event_handler(ce);
-- 
2.4.0

[PATCH 05/18] ARM/gemini/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate gemini driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-gemini/time.c | 69 ++++++++++++++++++++++-----------------------
 1 file changed, 34 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 0a63c4d25b64..b57d367d21f1 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -59,49 +59,48 @@ static int gemini_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void gemini_timer_set_mode(enum clock_event_mode mode,
-				  struct clock_event_device *evt)
+static int gemini_timer_shutdown(struct clock_event_device *evt)
+{
+	u32 cr;
+
+	/*
+	 * Disable also for oneshot: the set_next() call will arm the timer
+	 * instead.
+	 */
+	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	cr &= ~TIMER_2_CR_ENABLE;
+	cr &= ~TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	return 0;
+}
+
+static int gemini_timer_set_periodic(struct clock_event_device *evt)
 {
 	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	u32 cr;
 
-	switch (mode) {
-        case CLOCK_EVT_MODE_PERIODIC:
-		/* Start the timer */
-		writel(period,
-		       TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-		writel(period,
-		       TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		cr |= TIMER_2_CR_ENABLE;
-		cr |= TIMER_2_CR_INT;
-		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-        case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		/*
-		 * Disable also for oneshot: the set_next() call will
-		 * arm the timer instead.
-		 */
-		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		cr &= ~TIMER_2_CR_ENABLE;
-		cr &= ~TIMER_2_CR_INT;
-		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-		break;
-	default:
-                break;
-	}
+	/* Start the timer */
+	writel(period, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	writel(period, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	cr |= TIMER_2_CR_ENABLE;
+	cr |= TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	return 0;
 }
 
 /* Use TIMER2 as clock event */
 static struct clock_event_device gemini_clockevent = {
-	.name		= "TIMER2",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= gemini_timer_set_next_event,
-	.set_mode	= gemini_timer_set_mode,
+	.name			= "TIMER2",
+	/* Reasonably fast and accurate clock event */
+	.rating			= 300,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= gemini_timer_set_next_event,
+	.set_state_shutdown	= gemini_timer_shutdown,
+	.set_state_periodic	= gemini_timer_set_periodic,
+	.set_state_oneshot	= gemini_timer_shutdown,
+	.tick_resume		= gemini_timer_shutdown,
 };
 
 /*
-- 
2.4.0

[PATCH 06/18] ARM/imx/epit: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate imx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also drop 'clockevent_mode': It was caching the last state of the
clockevent device. The same behavior can be achieved by using
clockevents state helpers. These helpers are only required for oneshot
mode as shutdown/resume wouldn't be done twice by the core.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-imx/epit.c | 67 +++++++++++++++++++++++++-----------------------
 1 file changed, 35 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 074b1a81ba76..08ce20771bb3 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -57,7 +57,6 @@
 #include "hardware.h"
 
 static struct clock_event_device clockevent_epit;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
 static void __iomem *timer_base;
 
@@ -106,8 +105,8 @@ static int epit_set_next_event(unsigned long evt,
 	return 0;
 }
 
-static void epit_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+/* Left event sources disabled, no more interrupts appear */
+static int epit_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 
@@ -120,39 +119,41 @@ static void epit_set_mode(enum clock_event_mode mode,
 	/* Disable interrupt in GPT module */
 	epit_irq_disable();
 
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-
-		/* Clear pending interrupt */
-		epit_irq_acknowledge();
-	}
+	/* Clear pending interrupt */
+	epit_irq_acknowledge();
 
-	/* Remember timer mode */
-	clockevent_mode = mode;
 	local_irq_restore(flags);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
-				"supported for i.MX EPIT\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
+	return 0;
+}
+
+static int epit_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	epit_irq_disable();
+
+	/* Clear pending interrupt, only while switching mode */
+	if (!clockevent_state_oneshot(evt))
+		epit_irq_acknowledge();
+
 	/*
 	 * Do not put overhead of interrupt enable/disable into
 	 * epit_set_next_event(), the core has about 4 minutes
 	 * to call epit_set_next_event() or shutdown clock after
 	 * mode switching
 	 */
-		local_irq_save(flags);
-		epit_irq_enable();
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
+	epit_irq_enable();
+	local_irq_restore(flags);
+
+	return 0;
 }
 
 /*
@@ -176,11 +177,13 @@ static struct irqaction epit_timer_irq = {
 };
 
 static struct clock_event_device clockevent_epit = {
-	.name		= "epit",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= epit_set_mode,
-	.set_next_event	= epit_set_next_event,
-	.rating		= 200,
+	.name			= "epit",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= epit_shutdown,
+	.tick_resume		= epit_shutdown,
+	.set_state_oneshot	= epit_set_oneshot,
+	.set_next_event		= epit_set_next_event,
+	.rating			= 200,
 };
 
 static int __init epit_clockevent_init(struct clk *timer_clk)
-- 
2.4.0

[PATCH 07/18] ARM/ixp4xx/timer: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate ixp4xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

NOTE: ixp4xx_set_{oneshot|periodic} don't perform read operation on
'IXP4XX_OSRT1' register anymore.

Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-ixp4xx/common.c | 68 +++++++++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 28 deletions(-)

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8537d4c41e34..70773b948e7e 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -521,43 +521,55 @@ static int ixp4xx_set_next_event(unsigned long evt,
 	return 0;
 }
 
-static void ixp4xx_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
+static int ixp4xx_shutdown(struct clock_event_device *evt)
 {
 	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
 	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
- 		opts = IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set by 'set next_event' */
-		osrt = 0;
-		opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		opts &= ~IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		opts |= IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		osrt = opts = 0;
-		break;
-	}
+	opts &= ~IXP4XX_OST_ENABLE;
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
 
+static int ixp4xx_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
+	unsigned long osrt = 0;
+
+	/* period set by 'set next_event' */
 	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
+
+static int ixp4xx_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long opts = IXP4XX_OST_ENABLE;
+	unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
+
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
+}
+
+static int ixp4xx_resume(struct clock_event_device *evt)
+{
+	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
+	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
+
+	opts |= IXP4XX_OST_ENABLE;
+	*IXP4XX_OSRT1 = osrt | opts;
+	return 0;
 }
 
 static struct clock_event_device clockevent_ixp4xx = {
-	.name		= "ixp4xx timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_mode	= ixp4xx_set_mode,
-	.set_next_event	= ixp4xx_set_next_event,
+	.name			= "ixp4xx timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_state_shutdown	= ixp4xx_shutdown,
+	.set_state_periodic	= ixp4xx_set_periodic,
+	.set_state_oneshot	= ixp4xx_set_oneshot,
+	.tick_resume		= ixp4xx_resume,
+	.set_next_event		= ixp4xx_set_next_event,
 };
 
 static void __init ixp4xx_clockevent_init(void)
-- 
2.4.0

[PATCH 08/18] ARM/ks8695/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate ks8695 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

There is nothing to be done for oneshot or shutdown states and so are
not implemented.

Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-ks8695/time.c | 43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index a197874bf382..18eb0fbd8d82 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -54,28 +54,25 @@
 /* Timer0 Timeout Counter Register */
 #define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
 
-static void ks8695_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
+static int ks8695_set_periodic(struct clock_event_device *evt)
 {
+	u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
+	u32 half = DIV_ROUND_CLOSEST(rate, 2);
 	u32 tmcon;
 
-	if (mode == CLOCK_EVT_FEAT_PERIODIC) {
-		u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
-		u32 half = DIV_ROUND_CLOSEST(rate, 2);
-
-		/* Disable timer 1 */
-		tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
-		tmcon &= ~TMCON_T1EN;
-		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	/* Disable timer 1 */
+	tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
+	tmcon &= ~TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
 
-		/* Both registers need to count down */
-		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
-		writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
+	/* Both registers need to count down */
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
+	writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
 
-		/* Re-enable timer1 */
-		tmcon |= TMCON_T1EN;
-		writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
-	}
+	/* Re-enable timer1 */
+	tmcon |= TMCON_T1EN;
+	writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
+	return 0;
 }
 
 static int ks8695_set_next_event(unsigned long cycles,
@@ -102,11 +99,13 @@ static int ks8695_set_next_event(unsigned long cycles,
 }
 
 static struct clock_event_device clockevent_ks8695 = {
-	.name		= "ks8695_t1tc",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event	= ks8695_set_next_event,
-	.set_mode	= ks8695_set_mode,
+	.name			= "ks8695_t1tc",
+	/* Reasonably fast and accurate clock event */
+	.rating			= 300,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event		= ks8695_set_next_event,
+	.set_state_periodic	= ks8695_set_periodic,
 };
 
 /*
-- 
2.4.0

[PATCH 09/18] ARM/lpc32xx/timer: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate lpc32xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-lpc32xx/timer.c | 40 ++++++++++++++--------------------------
 1 file changed, 14 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 4e5837299c04..ff3499d1fb1a 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -43,36 +43,24 @@ static int lpc32xx_clkevt_next_event(unsigned long delta,
 	return 0;
 }
 
-static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
-    struct clock_event_device *dev)
+static int lpc32xx_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/*
-		 * Disable the timer. When using oneshot, we must also
-		 * disable the timer to wait for the first call to
-		 * set_next_event().
-		 */
-		__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	/*
+	 * Disable the timer. When using oneshot, we must also
+	 * disable the timer to wait for the first call to
+	 * set_next_event().
+	 */
+	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	return 0;
 }
 
 static struct clock_event_device lpc32xx_clkevt = {
-	.name		= "lpc32xx_clkevt",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 300,
-	.set_next_event	= lpc32xx_clkevt_next_event,
-	.set_mode	= lpc32xx_clkevt_mode,
+	.name			= "lpc32xx_clkevt",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 300,
+	.set_next_event		= lpc32xx_clkevt_next_event,
+	.set_state_shutdown	= lpc32xx_shutdown,
+	.set_state_oneshot	= lpc32xx_shutdown,
 };
 
 static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-- 
2.4.0

[PATCH 10/18] ARM/mmp/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate mmp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in set_mode(RESUME) except of
local_irq_{save|restore}(), which isn't required and so ->tick_resume
isn't implemented.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-mmp/time.c | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 10bfa03e58d4..dbc697b2fda1 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -124,32 +124,25 @@ static int timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *dev)
+static int timer_set_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* disable the matching interrupt */
-		__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
+	/* disable the matching interrupt */
+	__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
 	local_irq_restore(flags);
+
+	return 0;
 }
 
 static struct clock_event_device ckevt = {
-	.name		= "clockevent",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= timer_set_next_event,
-	.set_mode	= timer_set_mode,
+	.name			= "clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= timer_set_next_event,
+	.set_state_shutdown	= timer_set_shutdown,
+	.set_state_oneshot	= timer_set_shutdown,
 };
 
 static cycle_t clksrc_read(struct clocksource *cs)
-- 
2.4.0

[PATCH 11/18] ARM/netx/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate netx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We aren't writing zero twice on the control register for shutdown or
resume state now.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-netx/time.c | 61 +++++++++++++++++++++++++----------------------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 5fb2a590ec17..054a8a61e379 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -34,40 +34,40 @@
 #define TIMER_CLOCKEVENT 0
 #define TIMER_CLOCKSOURCE 1
 
-static void netx_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
+static inline void timer_shutdown(struct clock_event_device *evt)
 {
-	u32 tmode;
-
 	/* disable timer */
 	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+}
+
+static int netx_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+
+	return 0;
+}
+
+static int netx_set_oneshot(struct clock_event_device *evt)
+{
+	u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
+
+	timer_shutdown(evt);
+	writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
-			NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	default:
-		WARN(1, "%s: unhandled mode %d\n", __func__, mode);
-		/* fall through */
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		tmode = 0;
-		break;
-	}
+	return 0;
+}
 
+static int netx_set_periodic(struct clock_event_device *evt)
+{
+	u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
+		    NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
+
+	timer_shutdown(evt);
+	writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
 	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+
+	return 0;
 }
 
 static int netx_set_next_event(unsigned long evt,
@@ -81,7 +81,10 @@ static struct clock_event_device netx_clockevent = {
 	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = netx_set_next_event,
-	.set_mode = netx_set_mode,
+	.set_state_shutdown = netx_shutdown,
+	.set_state_periodic = netx_set_periodic,
+	.set_state_oneshot = netx_set_oneshot,
+	.tick_resume = netx_shutdown,
 };
 
 /*
-- 
2.4.0

[PATCH 12/18] ARM/omap1/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate omap driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-omap1/time.c | 35 ++++++++++++++++-------------------
 1 file changed, 16 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a7588cfd0286..524977a31a49 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -124,29 +124,26 @@ static int omap_mpu_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void omap_mpu_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int omap_mpu_set_oneshot(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_mpu_set_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		omap_mpu_timer_stop(0);
-		omap_mpu_remove_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	omap_mpu_timer_stop(0);
+	omap_mpu_remove_autoreset(0);
+	return 0;
+}
+
+static int omap_mpu_set_periodic(struct clock_event_device *evt)
+{
+	omap_mpu_set_autoreset(0);
+	return 0;
 }
 
 static struct clock_event_device clockevent_mpu_timer1 = {
-	.name		= "mpu_timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= omap_mpu_set_next_event,
-	.set_mode	= omap_mpu_set_mode,
+	.name			= "mpu_timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= omap_mpu_set_next_event,
+	.set_state_periodic	= omap_mpu_set_periodic,
+	.set_state_oneshot	= omap_mpu_set_oneshot,
 };
 
 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
-- 
2.4.0

[PATCH 13/18] ARM/omap1/timer32: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate omap timer32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-omap1/timer32k.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 36bf174b3fac..0ae6c52a7d70 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -114,29 +114,28 @@ static int omap_32k_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void omap_32k_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static int omap_32k_timer_shutdown(struct clock_event_device *evt)
 {
 	omap_32k_timer_stop();
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int omap_32k_timer_set_periodic(struct clock_event_device *evt)
+{
+	omap_32k_timer_stop();
+	omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+	return 0;
 }
 
 static struct clock_event_device clockevent_32k_timer = {
-	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= omap_32k_timer_set_next_event,
-	.set_mode	= omap_32k_timer_set_mode,
+	.name			= "32k-timer",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= omap_32k_timer_set_next_event,
+	.set_state_shutdown	= omap_32k_timer_shutdown,
+	.set_state_periodic	= omap_32k_timer_set_periodic,
+	.set_state_oneshot	= omap_32k_timer_shutdown,
+	.tick_resume		= omap_32k_timer_shutdown,
 };
 
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
-- 
2.4.0

[PATCH 14/18] ARM/omap2/timer: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate omap2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-omap2/timer.c | 48 ++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cac46d852da1..16b37e7196f5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -102,38 +102,38 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static int omap2_gp_timer_shutdown(struct clock_event_device *evt)
+{
+	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
+	return 0;
+}
+
+static int omap2_gp_timer_set_periodic(struct clock_event_device *evt)
 {
 	u32 period;
 
 	__omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clkev.rate / HZ;
-		period -= 1;
-		/* Looks like we need to first set the load value separately */
-		__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
-				      0xffffffff - period, OMAP_TIMER_POSTED);
-		__omap_dm_timer_load_start(&clkev,
-					OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
-					0xffffffff - period, OMAP_TIMER_POSTED);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	period = clkev.rate / HZ;
+	period -= 1;
+	/* Looks like we need to first set the load value separately */
+	__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period,
+			      OMAP_TIMER_POSTED);
+	__omap_dm_timer_load_start(&clkev,
+				   OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+				   0xffffffff - period, OMAP_TIMER_POSTED);
+	return 0;
 }
 
 static struct clock_event_device clockevent_gpt = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 300,
-	.set_next_event	= omap2_gp_timer_set_next_event,
-	.set_mode	= omap2_gp_timer_set_mode,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 300,
+	.set_next_event		= omap2_gp_timer_set_next_event,
+	.set_state_shutdown	= omap2_gp_timer_shutdown,
+	.set_state_periodic	= omap2_gp_timer_set_periodic,
+	.set_state_oneshot	= omap2_gp_timer_shutdown,
+	.tick_resume		= omap2_gp_timer_shutdown,
 };
 
 static struct property device_disabled = {
-- 
2.4.0

[PATCH 15/18] ARM/SPEAr/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate SPEAr driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also kill the unnecessary forward declaration of set-mode routine by
moving 'struct clock_event_device clkevt' towards the bottom of the file.

Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-spear/time.c | 89 ++++++++++++++++++++++++++--------------------
 1 file changed, 50 insertions(+), 39 deletions(-)

diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index 26fda4ed4d51..94342a0966e3 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -66,8 +66,6 @@
 static __iomem void *gpt_base;
 static struct clk *gpt_clk;
 
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev);
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
@@ -95,54 +93,67 @@ static void __init spear_clocksource_init(void)
 		200, 16, clocksource_mmio_readw_up);
 }
 
-static struct clock_event_device clkevt = {
-	.name = "tmr0",
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = clockevent_set_mode,
-	.set_next_event = clockevent_next_event,
-	.shift = 0,	/* to be computed */
-};
+static inline void timer_shutdown(struct clock_event_device *evt)
+{
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	/* stop the timer */
+	val &= ~CTRL_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+}
+
+static int spear_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+
+	return 0;
+}
+
+static int spear_set_oneshot(struct clock_event_device *evt)
+{
+	u16 val;
 
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev)
+	/* stop the timer */
+	timer_shutdown(evt);
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val |= CTRL_ONE_SHOT;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static int spear_set_periodic(struct clock_event_device *evt)
 {
 	u32 period;
 	u16 val;
 
 	/* stop the timer */
+	timer_shutdown(evt);
+
+	period = clk_get_rate(gpt_clk) / HZ;
+	period >>= CTRL_PRESCALER16;
+	writew(period, gpt_base + LOAD(CLKEVT));
+
 	val = readw(gpt_base + CR(CLKEVT));
-	val &= ~CTRL_ENABLE;
+	val &= ~CTRL_ONE_SHOT;
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clk_get_rate(gpt_clk) / HZ;
-		period >>= CTRL_PRESCALER16;
-		writew(period, gpt_base + LOAD(CLKEVT));
-
-		val = readw(gpt_base + CR(CLKEVT));
-		val &= ~CTRL_ONE_SHOT;
-		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		val = readw(gpt_base + CR(CLKEVT));
-		val |= CTRL_ONE_SHOT;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-
-		break;
-	default:
-		pr_err("Invalid mode requested\n");
-		break;
-	}
+	return 0;
 }
 
+static struct clock_event_device clkevt = {
+	.name = "tmr0",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown = spear_shutdown,
+	.set_state_periodic = spear_set_periodic,
+	.set_state_oneshot = spear_set_oneshot,
+	.tick_resume = spear_shutdown,
+	.set_next_event = clockevent_next_event,
+	.shift = 0,	/* to be computed */
+};
+
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-- 
2.4.0

[PATCH 16/18] ARM/w90x900/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate w90x900 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-w90x900/time.c | 51 ++++++++++++++++++++++++--------------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 9230d3725599..cd1966ec9143 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -48,31 +48,32 @@
 
 static unsigned int timer0_load;
 
-static void nuc900_clockevent_setmode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
+static int nuc900_clockevent_shutdown(struct clock_event_device *evt)
 {
-	unsigned int val;
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
-	val = __raw_readl(REG_TCSR0);
-	val &= ~(0x03 << 27);
+	__raw_writel(val, REG_TCSR0);
+	return 0;
+}
+
+static int nuc900_clockevent_set_oneshot(struct clock_event_device *evt)
+{
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writel(timer0_load, REG_TICR0);
-		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
-		break;
+	val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
 
-	case CLOCK_EVT_MODE_ONESHOT:
-		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
-		break;
+	__raw_writel(val, REG_TCSR0);
+	return 0;
+}
 
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int nuc900_clockevent_set_periodic(struct clock_event_device *evt)
+{
+	unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
 
+	__raw_writel(timer0_load, REG_TICR0);
+	val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
 	__raw_writel(val, REG_TCSR0);
+	return 0;
 }
 
 static int nuc900_clockevent_setnextevent(unsigned long evt,
@@ -90,11 +91,15 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 }
 
 static struct clock_event_device nuc900_clockevent_device = {
-	.name		= "nuc900-timer0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= nuc900_clockevent_setmode,
-	.set_next_event	= nuc900_clockevent_setnextevent,
-	.rating		= 300,
+	.name			= "nuc900-timer0",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= nuc900_clockevent_shutdown,
+	.set_state_periodic	= nuc900_clockevent_set_periodic,
+	.set_state_oneshot	= nuc900_clockevent_set_oneshot,
+	.tick_resume		= nuc900_clockevent_shutdown,
+	.set_next_event		= nuc900_clockevent_setnextevent,
+	.rating			= 300,
 };
 
 /*IRQ handler for the timer*/
-- 
2.4.0

Re: [PATCH 16/18] ARM/w90x900/time: Migrate to new 'set-state' interface

[Wan ZongShun]

2015-07-17 13:11 GMT+08:00 Viresh Kumar <viresh.kumar@linaro.org>:
> Migrate w90x900 driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> Cc: Wan ZongShun <mcuos.com@gmail.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-w90x900/time.c | 51 ++++++++++++++++++++++++--------------------
>  1 file changed, 28 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
> index 9230d3725599..cd1966ec9143 100644
> --- a/arch/arm/mach-w90x900/time.c
> +++ b/arch/arm/mach-w90x900/time.c
> @@ -48,31 +48,32 @@
>
>  static unsigned int timer0_load;
>
> -static void nuc900_clockevent_setmode(enum clock_event_mode mode,
> -               struct clock_event_device *clk)
> +static int nuc900_clockevent_shutdown(struct clock_event_device *evt)
>  {
> -       unsigned int val;
> +       unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
>
> -       val = __raw_readl(REG_TCSR0);
> -       val &= ~(0x03 << 27);
> +       __raw_writel(val, REG_TCSR0);
> +       return 0;
> +}
> +
> +static int nuc900_clockevent_set_oneshot(struct clock_event_device *evt)
> +{
> +       unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
>
> -       switch (mode) {
> -       case CLOCK_EVT_MODE_PERIODIC:
> -               __raw_writel(timer0_load, REG_TICR0);
> -               val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
> -               break;
> +       val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
>
> -       case CLOCK_EVT_MODE_ONESHOT:
> -               val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
> -               break;
> +       __raw_writel(val, REG_TCSR0);
> +       return 0;
> +}
>
> -       case CLOCK_EVT_MODE_UNUSED:
> -       case CLOCK_EVT_MODE_SHUTDOWN:
> -       case CLOCK_EVT_MODE_RESUME:
> -               break;
> -       }
> +static int nuc900_clockevent_set_periodic(struct clock_event_device *evt)
> +{
> +       unsigned int val = __raw_readl(REG_TCSR0) & ~(0x03 << 27);
>
> +       __raw_writel(timer0_load, REG_TICR0);
> +       val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
>         __raw_writel(val, REG_TCSR0);
> +       return 0;
>  }
>
>  static int nuc900_clockevent_setnextevent(unsigned long evt,
> @@ -90,11 +91,15 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
>  }
>
>  static struct clock_event_device nuc900_clockevent_device = {
> -       .name           = "nuc900-timer0",
> -       .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
> -       .set_mode       = nuc900_clockevent_setmode,
> -       .set_next_event = nuc900_clockevent_setnextevent,
> -       .rating         = 300,
> +       .name                   = "nuc900-timer0",
> +       .features               = CLOCK_EVT_FEAT_PERIODIC |
> +                                 CLOCK_EVT_FEAT_ONESHOT,
> +       .set_state_shutdown     = nuc900_clockevent_shutdown,
> +       .set_state_periodic     = nuc900_clockevent_set_periodic,
> +       .set_state_oneshot      = nuc900_clockevent_set_oneshot,
> +       .tick_resume            = nuc900_clockevent_shutdown,
> +       .set_next_event         = nuc900_clockevent_setnextevent,
> +       .rating                 = 300,
>  };
>

Acked-by: Wan zongshun <mcuos.com@gmail.com>

thanks!

>  /*IRQ handler for the timer*/
> --
> 2.4.0
>



-- 
---
Vincent Wan(Zongshun)
www.mcuos.com

[PATCH 17/18] ARM/iop/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate iop driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/plat-iop/time.c | 70 +++++++++++++++++++++++++++++-------------------
 1 file changed, 43 insertions(+), 27 deletions(-)

diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6ad65d8ae237..101e8f2c7abe 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -77,41 +77,57 @@ static int iop_set_next_event(unsigned long delta,
 
 static unsigned long ticks_per_jiffy;
 
-static void iop_set_mode(enum clock_event_mode mode,
-			 struct clock_event_device *unused)
+static int iop_set_periodic(struct clock_event_device *evt)
 {
 	u32 tmr = read_tmr0();
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		write_tmr0(tmr & ~IOP_TMR_EN);
-		write_tcr0(ticks_per_jiffy - 1);
-		write_trr0(ticks_per_jiffy - 1);
-		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* ->set_next_event sets period and enables timer */
-		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		tmr |= IOP_TMR_EN;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		tmr &= ~IOP_TMR_EN;
-		break;
-	}
+	write_tmr0(tmr & ~IOP_TMR_EN);
+	write_tcr0(ticks_per_jiffy - 1);
+	write_trr0(ticks_per_jiffy - 1);
+	tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
 
 	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_set_oneshot(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	/* ->set_next_event sets period and enables timer */
+	tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_shutdown(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	tmr &= ~IOP_TMR_EN;
+	write_tmr0(tmr);
+	return 0;
+}
+
+static int iop_resume(struct clock_event_device *evt)
+{
+	u32 tmr = read_tmr0();
+
+	tmr |= IOP_TMR_EN;
+	write_tmr0(tmr);
+	return 0;
 }
 
 static struct clock_event_device iop_clockevent = {
-	.name		= "iop_timer0",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 300,
-	.set_next_event	= iop_set_next_event,
-	.set_mode	= iop_set_mode,
+	.name			= "iop_timer0",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 300,
+	.set_next_event		= iop_set_next_event,
+	.set_state_shutdown	= iop_shutdown,
+	.set_state_periodic	= iop_set_periodic,
+	.tick_resume		= iop_resume,
+	.set_state_oneshot	= iop_set_oneshot,
 };
 
 static irqreturn_t
-- 
2.4.0

[PATCH 18/18] ARM/orion/time: Migrate to new 'set-state' interface

[Viresh Kumar]

Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/plat-orion/time.c | 93 ++++++++++++++++++++++++----------------------
 1 file changed, 48 insertions(+), 45 deletions(-)

diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 261258f717fc..8085a8aac812 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -106,60 +106,63 @@ orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
 	return 0;
 }
 
-static void
-orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static int orion_clkevt_shutdown(struct clock_event_device *evt)
 {
 	unsigned long flags;
 	u32 u;
 
 	local_irq_save(flags);
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/*
-		 * Setup timer to fire at 1/HZ intervals.
-		 */
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
-
-		/*
-		 * Enable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * Enable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u | TIMER1_EN | TIMER1_RELOAD_EN,
-		       timer_base + TIMER_CTRL_OFF);
-	} else {
-		/*
-		 * Disable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
-
-		/*
-		 * Disable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * ACK pending timer interrupt.
-		 */
-		writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
-
-	}
+
+	/* Disable timer */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+	/* Disable timer interrupt */
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
+	writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
+
+	/* ACK pending timer interrupt */
+	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int orion_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long flags;
+	u32 u;
+
+	local_irq_save(flags);
+
+	/* Setup timer to fire at 1/HZ intervals */
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+	/* Enable timer interrupt */
+	u = readl(bridge_base + BRIDGE_MASK_OFF);
+	writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
+
+	/* Enable timer */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	writel(u | TIMER1_EN | TIMER1_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
+
 	local_irq_restore(flags);
+
+	return 0;
 }
 
 static struct clock_event_device orion_clkevt = {
-	.name		= "orion_tick",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 300,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
+	.name			= "orion_tick",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.rating			= 300,
+	.set_next_event		= orion_clkevt_next_event,
+	.set_state_shutdown	= orion_clkevt_shutdown,
+	.set_state_periodic	= orion_clkevt_set_periodic,
+	.set_state_oneshot	= orion_clkevt_shutdown,
+	.tick_resume		= orion_clkevt_shutdown,
 };
 
 static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
-- 
2.4.0