mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net-next] net: phy: micrel: Add callback for restoring context
@ 2025-07-07 14:29 Biju Das
  2025-07-10 13:38 ` Paolo Abeni
  0 siblings, 1 reply; 3+ messages in thread
From: Biju Das @ 2025-07-07 14:29 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Biju Das, Russell King, netdev, linux-kernel, Geert Uytterhoeven,
	Prabhakar Mahadev Lad, Biju Das, linux-renesas-soc

The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state,
PHY loses the power and on wakeup the rgmii delays are not reconfigured
causing it to fail.

Add a generic resume callback for restoring the context on exit from
the PM suspend state. KSZ9131 is the first user of this callback and
reconfigure the rgmii_delay when it exit from PM suspend state.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
Ref:
 https://patchwork.kernel.org/project/linux-renesas-soc/patch/20250705170326.106073-1-biju.das.jz@bp.renesas.com/#26459627
---
 drivers/net/phy/micrel.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 74fd6ff32c6c..cea6082ac45c 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -362,6 +362,8 @@
 /* Delay used to get the second part from the LTC */
 #define LAN8841_GET_SEC_LTC_DELAY		(500 * NSEC_PER_MSEC)
 
+static void ksz9131_restore_rgmii_delay(struct phy_device *phydev);
+
 struct kszphy_hw_stat {
 	const char *string;
 	u8 reg;
@@ -374,6 +376,7 @@ static struct kszphy_hw_stat kszphy_hw_stats[] = {
 };
 
 struct kszphy_type {
+	void (*resume)(struct phy_device *phydev);
 	u32 led_mode_reg;
 	u16 interrupt_level_mask;
 	u16 cable_diag_reg;
@@ -444,6 +447,7 @@ struct kszphy_priv {
 	bool rmii_ref_clk_sel;
 	bool rmii_ref_clk_sel_val;
 	bool clk_enable;
+	bool is_suspended;
 	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
 	struct kszphy_phy_stats phy_stats;
 };
@@ -491,6 +495,7 @@ static const struct kszphy_type ksz9021_type = {
 };
 
 static const struct kszphy_type ksz9131_type = {
+	.resume = ksz9131_restore_rgmii_delay,
 	.interrupt_level_mask	= BIT(14),
 	.disable_dll_tx_bit	= BIT(12),
 	.disable_dll_rx_bit	= BIT(12),
@@ -1387,6 +1392,12 @@ static int ksz9131_config_rgmii_delay(struct phy_device *phydev)
 			      txcdll_val);
 }
 
+static void ksz9131_restore_rgmii_delay(struct phy_device *phydev)
+{
+	if (phy_interface_is_rgmii(phydev))
+		ksz9131_config_rgmii_delay(phydev);
+}
+
 /* Silicon Errata DS80000693B
  *
  * When LEDs are configured in Individual Mode, LED1 is ON in a no-link
@@ -2345,6 +2356,11 @@ static int kszphy_generic_suspend(struct phy_device *phydev)
 
 static int kszphy_suspend(struct phy_device *phydev)
 {
+	struct kszphy_priv *priv = phydev->priv;
+
+	if (priv)
+		priv->is_suspended = true;
+
 	/* Disable PHY Interrupts */
 	if (phy_interrupt_is_valid(phydev)) {
 		phydev->interrupts = PHY_INTERRUPT_DISABLED;
@@ -2381,8 +2397,17 @@ static void kszphy_parse_led_mode(struct phy_device *phydev)
 
 static int kszphy_resume(struct phy_device *phydev)
 {
+	struct kszphy_priv *priv = phydev->priv;
 	int ret;
 
+	if (priv && priv->is_suspended) {
+		const struct kszphy_type *type = priv->type;
+
+		priv->is_suspended = false;
+		if (type->resume)
+			type->resume(phydev);
+	}
+
 	ret = kszphy_generic_resume(phydev);
 	if (ret)
 		return ret;
-- 
2.43.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH net-next] net: phy: micrel: Add callback for restoring context
  2025-07-07 14:29 [PATCH net-next] net: phy: micrel: Add callback for restoring context Biju Das
@ 2025-07-10 13:38 ` Paolo Abeni
  2025-07-10 17:43   ` Biju Das
  0 siblings, 1 reply; 3+ messages in thread
From: Paolo Abeni @ 2025-07-10 13:38 UTC (permalink / raw)
  To: Biju Das, Andrew Lunn, Heiner Kallweit, David S. Miller,
	Eric Dumazet, Jakub Kicinski
  Cc: Russell King, netdev, linux-kernel, Geert Uytterhoeven,
	Prabhakar Mahadev Lad, Biju Das, linux-renesas-soc

On 7/7/25 4:29 PM, Biju Das wrote:
> @@ -374,6 +376,7 @@ static struct kszphy_hw_stat kszphy_hw_stats[] = {
>  };
>  
>  struct kszphy_type {
> +	void (*resume)(struct phy_device *phydev);
>  	u32 led_mode_reg;
>  	u16 interrupt_level_mask;
>  	u16 cable_diag_reg;

Why adding another callback? I think you could avoid it using a
ksz9131-specific phy_driver->resume.

> @@ -444,6 +447,7 @@ struct kszphy_priv {
>  	bool rmii_ref_clk_sel;
>  	bool rmii_ref_clk_sel_val;
>  	bool clk_enable;
> +	bool is_suspended;
>  	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
>  	struct kszphy_phy_stats phy_stats;
>  };
> @@ -491,6 +495,7 @@ static const struct kszphy_type ksz9021_type = {
>  };
>  
>  static const struct kszphy_type ksz9131_type = {
> +	.resume = ksz9131_restore_rgmii_delay,
>  	.interrupt_level_mask	= BIT(14),
>  	.disable_dll_tx_bit	= BIT(12),
>  	.disable_dll_rx_bit	= BIT(12),
> @@ -1387,6 +1392,12 @@ static int ksz9131_config_rgmii_delay(struct phy_device *phydev)
>  			      txcdll_val);
>  }
>  
> +static void ksz9131_restore_rgmii_delay(struct phy_device *phydev)
> +{
> +	if (phy_interface_is_rgmii(phydev))
> +		ksz9131_config_rgmii_delay(phydev);
> +}
> +
>  /* Silicon Errata DS80000693B
>   *
>   * When LEDs are configured in Individual Mode, LED1 is ON in a no-link
> @@ -2345,6 +2356,11 @@ static int kszphy_generic_suspend(struct phy_device *phydev)
>  
>  static int kszphy_suspend(struct phy_device *phydev)
>  {
> +	struct kszphy_priv *priv = phydev->priv;
> +
> +	if (priv)
> +		priv->is_suspended = true;

Under which circumstances `priv` could be NULL? AFAICS it should always
not NULL after probe.

> +
>  	/* Disable PHY Interrupts */
>  	if (phy_interrupt_is_valid(phydev)) {
>  		phydev->interrupts = PHY_INTERRUPT_DISABLED;
> @@ -2381,8 +2397,17 @@ static void kszphy_parse_led_mode(struct phy_device *phydev)
>  
>  static int kszphy_resume(struct phy_device *phydev)
>  {
> +	struct kszphy_priv *priv = phydev->priv;
>  	int ret;
>  
> +	if (priv && priv->is_suspended) {

I think you can use phydev->suspended instead of adding another flag.

Also, can resume be invoked without the phydev being suspended?

/P


^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [PATCH net-next] net: phy: micrel: Add callback for restoring context
  2025-07-10 13:38 ` Paolo Abeni
@ 2025-07-10 17:43   ` Biju Das
  0 siblings, 0 replies; 3+ messages in thread
From: Biju Das @ 2025-07-10 17:43 UTC (permalink / raw)
  To: Paolo Abeni, Andrew Lunn, Heiner Kallweit, David S. Miller,
	Eric Dumazet, Jakub Kicinski
  Cc: Russell King, netdev, linux-kernel, Geert Uytterhoeven,
	Prabhakar Mahadev Lad, biju.das.au, linux-renesas-soc

Hi Paolo Abeni,

Thanks for the feedback.

> -----Original Message-----
> From: Paolo Abeni <pabeni@redhat.com>
> Sent: 10 July 2025 14:38
> Subject: Re: [PATCH net-next] net: phy: micrel: Add callback for restoring context
> 
> On 7/7/25 4:29 PM, Biju Das wrote:
> > @@ -374,6 +376,7 @@ static struct kszphy_hw_stat kszphy_hw_stats[] = {
> > };
> >
> >  struct kszphy_type {
> > +	void (*resume)(struct phy_device *phydev);
> >  	u32 led_mode_reg;
> >  	u16 interrupt_level_mask;
> >  	u16 cable_diag_reg;
> 
> Why adding another callback? I think you could avoid it using a ksz9131-specific phy_driver->resume.

It is being called from open() as well see [1]

[1]
[    1.934177]  kszphy_resume+0x18/0xc4
[    1.934193]  phy_resume+0x3c/0x74
[    1.934207]  phy_attach_direct+0x1bc/0x398
[    1.934220]  phylink_fwnode_phy_connect+0xb0/0x130
[    1.934237]  __stmmac_open+0xe4/0x50c
[    1.934251]  stmmac_open+0x44/0xd4

> 
> > @@ -444,6 +447,7 @@ struct kszphy_priv {
> >  	bool rmii_ref_clk_sel;
> >  	bool rmii_ref_clk_sel_val;
> >  	bool clk_enable;
> > +	bool is_suspended;
> >  	u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
> >  	struct kszphy_phy_stats phy_stats;
> >  };
> > @@ -491,6 +495,7 @@ static const struct kszphy_type ksz9021_type = {
> > };
> >
> >  static const struct kszphy_type ksz9131_type = {
> > +	.resume = ksz9131_restore_rgmii_delay,
> >  	.interrupt_level_mask	= BIT(14),
> >  	.disable_dll_tx_bit	= BIT(12),
> >  	.disable_dll_rx_bit	= BIT(12),
> > @@ -1387,6 +1392,12 @@ static int ksz9131_config_rgmii_delay(struct phy_device *phydev)
> >  			      txcdll_val);
> >  }
> >
> > +static void ksz9131_restore_rgmii_delay(struct phy_device *phydev) {
> > +	if (phy_interface_is_rgmii(phydev))
> > +		ksz9131_config_rgmii_delay(phydev);
> > +}
> > +
> >  /* Silicon Errata DS80000693B
> >   *
> >   * When LEDs are configured in Individual Mode, LED1 is ON in a
> > no-link @@ -2345,6 +2356,11 @@ static int
> > kszphy_generic_suspend(struct phy_device *phydev)
> >
> >  static int kszphy_suspend(struct phy_device *phydev)  {
> > +	struct kszphy_priv *priv = phydev->priv;
> > +
> > +	if (priv)
> > +		priv->is_suspended = true;
> 
> Under which circumstances `priv` could be NULL? AFAICS it should always not NULL after probe.

On the kszphy_config_init(), there is a check for NULL. That is the reason for adding it here.

Yor right, priv cannot be NULL after probe.


> 
> > +
> >  	/* Disable PHY Interrupts */
> >  	if (phy_interrupt_is_valid(phydev)) {
> >  		phydev->interrupts = PHY_INTERRUPT_DISABLED; @@ -2381,8 +2397,17 @@
> > static void kszphy_parse_led_mode(struct phy_device *phydev)
> >
> >  static int kszphy_resume(struct phy_device *phydev)  {
> > +	struct kszphy_priv *priv = phydev->priv;
> >  	int ret;
> >
> > +	if (priv && priv->is_suspended) {
> 
> I think you can use phydev->suspended instead of adding another flag.

Yes, I can use phydev->suspended as phylink_prepare_resume() calls phy_resume()
with phydev->suspended set.
> 
> Also, can resume be invoked without the phydev being suspended?

Yes, phy_attach_direct() during open() invokes resume.

Cheers,
Biju

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2025-07-10 17:44 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-07-07 14:29 [PATCH net-next] net: phy: micrel: Add callback for restoring context Biju Das
2025-07-10 13:38 ` Paolo Abeni
2025-07-10 17:43   ` Biju Das

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®