From: Philipp Zabel <p.zabel@pengutronix.de>
To: admin@roadbobek.com, Bin Liu <b-liu@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH 0/2] usb/phy: sunxi: Assert reset before deasserting on init
Date: Tue, 17 Nov 2026 14:04:36 +0100 [thread overview]
Message-ID: <614eaf9d3529797eaa6825e3c2226c4e9cf34234.camel@pengutronix.de> (raw)
In-Reply-To: <20261117-usb-sunxi-reset-fix-v1-0-c2b76e0e84e1@roadbobek.com>
On Di, 2026-11-17 at 13:00 +0000, Roadbobek via B4 Relay wrote:
> When a bootloader such as U-Boot (for example with
> CONFIG_USB_MUSB_HOST=y) initializes USB host mode and boots Linux
> without stopping USB first, both the MUSB controller and USB0 PHY
> reset lines are already deasserted when Linux probes them.
>
> Because reset_control_deassert() alone is a no-op on an already
> deasserted reset line, stale hardware register state persists across
> boot. On Allwinner A33, MUSB stays wedged in a_wait_bcon with
> DevCtl=0x99, Power=0xf0, and a frozen Frame counter even across
> hot-unplug and replug.
>
> This two-patch series briefly asserts reset before deasserting it in
> both drivers so USB starts cleanly regardless of prior bootloader state:
>
> - Patch 1 asserts glue->rst in sunxi_musb_init().
> - Patch 2 asserts phy->reset in sun4i_usb_phy_init().
While you are at it, could you also replace the
devm_reset_control_get() calls with devm_reset_control_get_exclusive(),
to make it clear the driver requires exclusive access to assert the
resets?
regards
Philipp
prev parent reply other threads:[~2026-11-17 13:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 13:00 Roadbobek via B4 Relay
2026-11-17 13:00 ` [PATCH 1/2] usb: musb: " Roadbobek via B4 Relay
2026-11-17 13:05 ` Philipp Zabel
2026-11-17 13:00 ` [PATCH 2/2] phy: sun4i-usb: Assert reset before deasserting in phy init Roadbobek via B4 Relay
2026-11-17 13:04 ` Philipp Zabel
2026-11-17 13:04 ` Philipp Zabel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=614eaf9d3529797eaa6825e3c2226c4e9cf34234.camel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=admin@roadbobek.com \
--cc=b-liu@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=mani@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=samuel@sholland.org \
--cc=vkoul@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®