From: Philipp Zabel <p.zabel@pengutronix.de>
To: admin@roadbobek.com, Bin Liu <b-liu@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH 1/2] usb: musb: sunxi: Assert reset before deasserting on init
Date: Tue, 17 Nov 2026 14:05:07 +0100 [thread overview]
Message-ID: <974d629b23d38d46a033513db9b4e783b9c11cda.camel@pengutronix.de> (raw)
In-Reply-To: <20261117-usb-sunxi-reset-fix-v1-1-c2b76e0e84e1@roadbobek.com>
On Di, 2026-11-17 at 13:00 +0000, Roadbobek via B4 Relay wrote:
> From: Roadbobek <admin@roadbobek.com>
>
> When a bootloader such as U-Boot (for example with
> CONFIG_USB_MUSB_HOST=y) initializes MUSB and boots Linux
> without stopping USB first, the controller reset line is
> already deasserted at probe time.
>
> In that case reset_control_deassert() in sunxi_musb_init()
> is a no-op and stale MUSB register state persists across boot.
> On Allwinner A33, MUSB stays wedged in a_wait_bcon with
> DevCtl=0x99, Power=0xf0, and a frozen Frame counter even
> across hot-unplug and replug.
>
> Assert glue->rst briefly before deasserting it when
> SUNXI_MUSB_FL_HAS_RESET is set so MUSB starts cleanly.
> Tested on an Allwinner A33 Q8 tablet (Laser MID-786).
>
> Signed-off-by: Roadbobek <admin@roadbobek.com>
> ---
> drivers/usb/musb/sunxi.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
> index a17b1c150626..3d16049e53b5 100644
> --- a/drivers/usb/musb/sunxi.c
> +++ b/drivers/usb/musb/sunxi.c
> @@ -9,6 +9,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/extcon.h>
> #include <linux/io.h>
> @@ -239,6 +240,8 @@ static int sunxi_musb_init(struct musb *musb)
> goto error_sram_release;
>
> if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) {
> + reset_control_assert(glue->rst);
No error handling?
> + usleep_range(10, 20);
> ret = reset_control_deassert(glue->rst);
> if (ret)
> goto error_clk_disable;
regards
Philipp
next prev parent reply other threads:[~2026-11-17 13:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 13:00 [PATCH 0/2] usb/phy: " Roadbobek via B4 Relay
2026-11-17 13:00 ` [PATCH 1/2] usb: musb: " Roadbobek via B4 Relay
2026-11-17 13:05 ` Philipp Zabel [this message]
2026-11-17 13:00 ` [PATCH 2/2] phy: sun4i-usb: Assert reset before deasserting in phy init Roadbobek via B4 Relay
2026-11-17 13:04 ` Philipp Zabel
2026-11-17 13:04 ` [PATCH 0/2] usb/phy: sunxi: Assert reset before deasserting on init Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=974d629b23d38d46a033513db9b4e783b9c11cda.camel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=admin@roadbobek.com \
--cc=b-liu@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=mani@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=samuel@sholland.org \
--cc=vkoul@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®