mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>,
	Barry Song <21cnbao@gmail.com>,
	Vishal Moola <vishal.moola@gmail.com>,
	akpm@linux-foundation.org, zokeefe@google.com,
	shy828301@gmail.com, mhocko@suse.com, fengwei.yin@intel.com,
	xiehuan09@gmail.com, wangkefeng.wang@huawei.com,
	songmuchun@bytedance.com, peterx@redhat.com, minchan@kernel.org,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] mm/madvise: enhance lazyfreeing with mTHP in madvise_free
Date: Thu, 7 Mar 2024 15:58:38 +0100	[thread overview]
Message-ID: <63801377-2648-4c3b-b534-3cc5835f5cf6@redhat.com> (raw)
In-Reply-To: <CAK1f24k8MgR-3sqpqZmg=aTF5Sh4if2o7qeW9zfGpGCSbHR2PA@mail.gmail.com>

On 07.03.24 15:41, Lance Yang wrote:
> Hey Barry, Ryan, David,
> 
> Thanks a lot for taking the time to explain and provide suggestions!
> I really appreciate your time!
> 
> IIUC, here's what we need to do for v3:
> 
> If folio_likely_mapped_shared() is true, or if we cannot acquire
> the folio lock, we simply skip the batched PTEs. Then, we compare
> the number of batched PTEs against folio_mapcount(). Finally,
> batch-update the access and dirty only.
> 
> I'm not sure if I've understood correctly, could you please confirm?
> 
> Thanks,
> Lance
> 
> On Thu, Mar 7, 2024 at 7:17 PM David Hildenbrand <david@redhat.com> wrote:
>>
>> On 07.03.24 12:13, Ryan Roberts wrote:
>>> On 07/03/2024 10:54, David Hildenbrand wrote:
>>>> On 07.03.24 11:54, David Hildenbrand wrote:
>>>>> On 07.03.24 11:50, Ryan Roberts wrote:
>>>>>> On 07/03/2024 09:33, Barry Song wrote:
>>>>>>> On Thu, Mar 7, 2024 at 10:07 PM Ryan Roberts <ryan.roberts@arm.com> wrote:
>>>>>>>>
>>>>>>>> On 07/03/2024 08:10, Barry Song wrote:
>>>>>>>>> On Thu, Mar 7, 2024 at 9:00 PM Lance Yang <ioworker0@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Hey Barry,
>>>>>>>>>>
>>>>>>>>>> Thanks for taking time to review!
>>>>>>>>>>
>>>>>>>>>> On Thu, Mar 7, 2024 at 3:00 PM Barry Song <21cnbao@gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Mar 7, 2024 at 7:15 PM Lance Yang <ioworker0@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>> [...]
>>>>>>>>>>>> +static inline bool can_mark_large_folio_lazyfree(unsigned long addr,
>>>>>>>>>>>> +                                                struct folio *folio,
>>>>>>>>>>>> pte_t *start_pte)
>>>>>>>>>>>> +{
>>>>>>>>>>>> +       int nr_pages = folio_nr_pages(folio);
>>>>>>>>>>>> +       fpb_t flags = FPB_IGNORE_DIRTY | FPB_IGNORE_SOFT_DIRTY;
>>>>>>>>>>>> +
>>>>>>>>>>>> +       for (int i = 0; i < nr_pages; i++)
>>>>>>>>>>>> +               if (page_mapcount(folio_page(folio, i)) != 1)
>>>>>>>>>>>> +                       return false;
>>>>>>>>>>>
>>>>>>>>>>> we have moved to folio_estimated_sharers though it is not precise, so
>>>>>>>>>>> we don't do
>>>>>>>>>>> this check with lots of loops and depending on the subpage's mapcount.
>>>>>>>>>>
>>>>>>>>>> If we don't check the subpage’s mapcount, and there is a cow folio
>>>>>>>>>> associated
>>>>>>>>>> with this folio and the cow folio has smaller size than this folio,
>>>>>>>>>> should we still
>>>>>>>>>> mark this folio as lazyfree?
>>>>>>>>>
>>>>>>>>> I agree, this is true. However, we've somehow accepted the fact that
>>>>>>>>> folio_likely_mapped_shared
>>>>>>>>> can result in false negatives or false positives to balance the
>>>>>>>>> overhead.  So I really don't know :-)
>>>>>>>>>
>>>>>>>>> Maybe David and Vishal can give some comments here.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> BTW, do we need to rebase our work against David's changes[1]?
>>>>>>>>>>> [1]
>>>>>>>>>>> https://lore.kernel.org/linux-mm/20240227201548.857831-1-david@redhat.com/
>>>>>>>>>>
>>>>>>>>>> Yes, we should rebase our work against David’s changes.
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> +
>>>>>>>>>>>> +       return nr_pages == folio_pte_batch(folio, addr, start_pte,
>>>>>>>>>>>> +                                        ptep_get(start_pte), nr_pages,
>>>>>>>>>>>> flags, NULL);
>>>>>>>>>>>> +}
>>>>>>>>>>>> +
>>>>>>>>>>>>      static int madvise_free_pte_range(pmd_t *pmd, unsigned long addr,
>>>>>>>>>>>>                                     unsigned long end, struct mm_walk *walk)
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -676,11 +690,45 @@ static int madvise_free_pte_range(pmd_t *pmd,
>>>>>>>>>>>> unsigned long addr,
>>>>>>>>>>>>                      */
>>>>>>>>>>>>                     if (folio_test_large(folio)) {
>>>>>>>>>>>>                             int err;
>>>>>>>>>>>> +                       unsigned long next_addr, align;
>>>>>>>>>>>>
>>>>>>>>>>>> -                       if (folio_estimated_sharers(folio) != 1)
>>>>>>>>>>>> -                               break;
>>>>>>>>>>>> -                       if (!folio_trylock(folio))
>>>>>>>>>>>> -                               break;
>>>>>>>>>>>> +                       if (folio_estimated_sharers(folio) != 1 ||
>>>>>>>>>>>> +                           !folio_trylock(folio))
>>>>>>>>>>>> +                               goto skip_large_folio;
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I don't think we can skip all the PTEs for nr_pages, as some of them
>>>>>>>>>>> might be
>>>>>>>>>>> pointing to other folios.
>>>>>>>>>>>
>>>>>>>>>>> for example, for a large folio with 16PTEs, you do MADV_DONTNEED(15-16),
>>>>>>>>>>> and write the memory of PTE15 and PTE16, you get page faults, thus PTE15
>>>>>>>>>>> and PTE16 will point to two different small folios. We can only skip
>>>>>>>>>>> when we
>>>>>>>>>>> are sure nr_pages == folio_pte_batch() is sure.
>>>>>>>>>>
>>>>>>>>>> Agreed. Thanks for pointing that out.
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> +
>>>>>>>>>>>> +                       align = folio_nr_pages(folio) * PAGE_SIZE;
>>>>>>>>>>>> +                       next_addr = ALIGN_DOWN(addr + align, align);
>>>>>>>>>>>> +
>>>>>>>>>>>> +                       /*
>>>>>>>>>>>> +                        * If we mark only the subpages as lazyfree, or
>>>>>>>>>>>> +                        * cannot mark the entire large folio as lazyfree,
>>>>>>>>>>>> +                        * then just split it.
>>>>>>>>>>>> +                        */
>>>>>>>>>>>> +                       if (next_addr > end || next_addr - addr !=
>>>>>>>>>>>> align ||
>>>>>>>>>>>> +                           !can_mark_large_folio_lazyfree(addr, folio,
>>>>>>>>>>>> pte))
>>>>>>>>>>>> +                               goto split_large_folio;
>>>>>>>>>>>> +
>>>>>>>>>>>> +                       /*
>>>>>>>>>>>> +                        * Avoid unnecessary folio splitting if the large
>>>>>>>>>>>> +                        * folio is entirely within the given range.
>>>>>>>>>>>> +                        */
>>>>>>>>>>>> +                       folio_clear_dirty(folio);
>>>>>>>>>>>> +                       folio_unlock(folio);
>>>>>>>>>>>> +                       for (; addr != next_addr; pte++, addr +=
>>>>>>>>>>>> PAGE_SIZE) {
>>>>>>>>>>>> +                               ptent = ptep_get(pte);
>>>>>>>>>>>> +                               if (pte_young(ptent) ||
>>>>>>>>>>>> pte_dirty(ptent)) {
>>>>>>>>>>>> +                                       ptent = ptep_get_and_clear_full(
>>>>>>>>>>>> +                                               mm, addr, pte,
>>>>>>>>>>>> tlb->fullmm);
>>>>>>>>>>>> +                                       ptent = pte_mkold(ptent);
>>>>>>>>>>>> +                                       ptent = pte_mkclean(ptent);
>>>>>>>>>>>> +                                       set_pte_at(mm, addr, pte, ptent);
>>>>>>>>>>>> +                                       tlb_remove_tlb_entry(tlb, pte,
>>>>>>>>>>>> addr);
>>>>>>>>>>>> +                               }
>>>>>>>>>>>
>>>>>>>>>>> Can we do this in batches? for a CONT-PTE mapped large folio, you are
>>>>>>>>>>> unfolding
>>>>>>>>>>> and folding again. It seems quite expensive.
>>>>>>>>
>>>>>>>> I'm not convinced we should be doing this in batches. We want the initial
>>>>>>>> folio_pte_batch() to be as loose as possible regarding permissions so that we
>>>>>>>> reduce our chances of splitting folios to the min. (e.g. ignore SW bits like
>>>>>>>> soft dirty, etc). I think it might be possible that some PTEs are RO and other
>>>>>>>> RW too (e.g. due to cow - although with the current cow impl, probably not.
>>>>>>>> But
>>>>>>>> its fragile to assume that). Anyway, if we do an initial batch that ignores
>>>>>>>> all
>>>>>>>
>>>>>>> You are correct. I believe this scenario could indeed occur. For instance,
>>>>>>> if process A forks process B and then unmaps itself, leaving B as the
>>>>>>> sole process owning the large folio.  The current wp_page_reuse() function
>>>>>>> will reuse PTE one by one while the specific subpage is written.
>>>>>>
>>>>>> Hmm - I thought it would only reuse if the total mapcount for the folio was 1.
>>>>>> And since it is a large folio with each page mapped once in proc B, I thought
>>>>>> every subpage write would cause a copy except the last one? I haven't looked at
>>>>>> the code for a while. But I had it in my head that this is an area we need to
>>>>>> improve for mTHP.
>>>>>
>>>>> wp_page_reuse() will currently reuse a PTE part of a large folio only if
>>>>> a single PTE remains mapped (refcount == 0).
>>>>
>>>> ^ == 1
>>>
>>> Ahh yes. That's what I meant. I got the behacviour vagulely right though.
>>>
>>> Anyway, regardless, I'm not sure we want to batch here. Or if we do, we want to
>>> batch function that will only clear access and dirty.
>>
>> We likely want to detect a folio batch the "usual" way (as relaxed as
>> possible), then do all the checks (#pte == folio_mapcount() under folio
>> lock), and finally batch-update the access and dirty only.

Something like:

1) We might want to factor out the existing single-pte case and extend 
it to handle multiple PTEs (nr_pages). For the existing code, we would 
pass in "nr_pages".

For example, instead of "folio_mapcount(folio) != 1" you'd check 
"folio_mapcount(folio) != nr_pages" in there. And we'd need functions to 
abstract working on multiple ptes.

2) We'd add something like wrprotect_ptes(), that does the mkold+clean 
on multiple PTEs.

Naming suggestion for such a function requested :)

3) Then, we might want to extend folio_pte_batch() by an *any_young and 
*any_dirty parameter that will get optimized out for other users. So you 
get that information right when scanning.


Just a rough idea, devil is in the detail. But likely trying to abstrct 
the code to handle "multiple pages of the same folio" should come just 
naturally like we used to do for fork() and munmap() so far.

-- 
Cheers,

David / dhildenb


  reply	other threads:[~2024-03-07 14:58 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-07  6:14 Lance Yang
2024-03-07  7:00 ` Barry Song
2024-03-07  8:00   ` Lance Yang
2024-03-07  8:10     ` Barry Song
2024-03-07  8:32       ` David Hildenbrand
2024-03-07  9:07       ` Ryan Roberts
2024-03-07  9:33         ` Barry Song
2024-03-07 10:50           ` Ryan Roberts
2024-03-07 10:54             ` David Hildenbrand
2024-03-07 10:54               ` David Hildenbrand
2024-03-07 11:13                 ` Ryan Roberts
2024-03-07 11:17                   ` David Hildenbrand
2024-03-07 14:41                     ` Lance Yang
2024-03-07 14:58                       ` David Hildenbrand [this message]
2024-03-07 15:08                         ` Lance Yang
2024-03-07 11:26                   ` Barry Song
2024-03-07 11:31                     ` David Hildenbrand
2024-03-07 11:42                       ` Ryan Roberts
2024-03-07 11:45                         ` David Hildenbrand
2024-03-07 12:01                           ` Barry Song
2024-03-07 12:04                             ` David Hildenbrand
2024-03-07 16:31                             ` Ryan Roberts
2024-03-07 18:54                               ` Barry Song
2024-03-07 19:48                                 ` David Hildenbrand
2024-03-08 13:05                                 ` Ryan Roberts
2024-03-08 13:27                                   ` David Hildenbrand
2024-03-08 13:48                                     ` Ryan Roberts
2024-03-08 18:01                                   ` Barry Song
2024-03-11  9:55                                     ` Ryan Roberts
2024-03-11 10:01                                       ` Barry Song
2024-03-11 15:07         ` Ryan Roberts
2024-03-12 10:20           ` Lance Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=63801377-2648-4c3b-b534-3cc5835f5cf6@redhat.com \
    --to=david@redhat.com \
    --cc=21cnbao@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=fengwei.yin@intel.com \
    --cc=ioworker0@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=peterx@redhat.com \
    --cc=ryan.roberts@arm.com \
    --cc=shy828301@gmail.com \
    --cc=songmuchun@bytedance.com \
    --cc=vishal.moola@gmail.com \
    --cc=wangkefeng.wang@huawei.com \
    --cc=xiehuan09@gmail.com \
    --cc=zokeefe@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®