From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: Yicheng Li <yichengli@chromium.org>, linux-kernel@vger.kernel.org
Cc: bleung@chromium.org, gwendal@chromium.org,
"Fabien Lahoudère" <fabien.lahoudere@collabora.com>
Subject: Re: [PATCH] mfd / platform: cros_ec: Query EC protocol version if EC transitions between RO/RW
Date: Wed, 20 Nov 2019 17:08:06 +0100 [thread overview]
Message-ID: <64265e5d-abd6-313e-0022-dac3719d7201@collabora.com> (raw)
In-Reply-To: <20191118200000.35484-1-yichengli@chromium.org>
Hi Yicheng,
Many thanks for sending the patch upstream.
On 18/11/19 21:00, Yicheng Li wrote:
> RO and RW of EC may have different EC protocol version. If EC transitions
> between RO and RW, but AP does not reboot (this is true for fingerprint
> microcontroller / cros_fp, but not true for main ec / cros_ec), the AP
> still uses the protocol version queried before transition, which can
> cause problems. In the case of fingerprint microcontroller, this causes
> AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the
> interrupt handler, which in turn prevents RO to clear the interrupt
> line to AP, in an infinite loop.
>
cc'ing: Fabien.
I am wondering if we should be able to reproduce this from userspace, i.e by
setting firmware to RO and issuing a EC_CMD_REBOOT.
What's the actual issue, if the firmware hangs switches to RO and reboots? Is
this happening in products or is something that you detected while playing with
the firmware?
> Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there
> might have been a transition between RO and RW, so re-query the protocol.
>
> Signed-off-by: Yicheng Li <yichengli@chromium.org>
>
> Change-Id: Ib58032ff4a8e113bdbd07212e8aff42807afff38
> Series-to: LKML <linux-kernel@vger.kernel.org>
> Series-cc: Benson Leung <bleung@chromium.org>, Enric Balletbo i Serra <enric.balletbo@collabora.com>, Gwendal Grignou <gwendal@chromium.org>
You should get rid of the three above lines, did you use patman correctly to
send this patch?
> ---
> drivers/platform/chrome/cros_ec.c | 24 +++++++++++++++++++++
> include/linux/platform_data/cros_ec_proto.h | 1 +
> 2 files changed, 25 insertions(+)
>
> diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
> index 9b2d07422e17..0c910846d99d 100644
> --- a/drivers/platform/chrome/cros_ec.c
> +++ b/drivers/platform/chrome/cros_ec.c
> @@ -104,6 +104,23 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
> return ret;
> }
>
> +static int cros_ec_ready_event(struct notifier_block *nb,
> + unsigned long queued_during_suspend, void *_notify)
> +{
> + struct cros_ec_device *ec_dev = container_of(nb, struct cros_ec_device,
> + notifier_ready);
> + u32 host_event = cros_ec_get_host_event(ec_dev);
> +
> + if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INTERFACE_READY)) {
> + mutex_lock(&ec_dev->lock);
> + cros_ec_query_all(ec_dev);
> + mutex_unlock(&ec_dev->lock);
> + return NOTIFY_OK;
> + } else {
> + return NOTIFY_DONE;
> + }
no else, just
return NOTIFY_DONE;
> +}
> +
> /**
> * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> * @ec_dev: Device to register.
> @@ -201,6 +218,13 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
> dev_dbg(ec_dev->dev, "Error %d clearing sleep event to ec",
> err);
>
> + /* Register the notifier for EC_HOST_EVENT_INTERFACE_READY event. */
> + ec_dev->notifier_ready.notifier_call = cros_ec_ready_event;
> + err = blocking_notifier_chain_register(&ec_dev->event_notifier,
> + &ec_dev->notifier_ready);
> + if (err < 0)
> + dev_warn(ec_dev->dev, "Failed to register notifier\n");
> +
Is that only a warning and should be ignored if it fails?
BTW, blocking_notfier_chain_register _always_ returns 0. So I'd say that better
do in case at some point starts to returning something different.
if (err)
return err;
> dev_info(dev, "Chrome EC device registered\n");
>
> return 0;
> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
> index 0d4e4aaed37a..9840408c0b01 100644
> --- a/include/linux/platform_data/cros_ec_proto.h
> +++ b/include/linux/platform_data/cros_ec_proto.h
> @@ -161,6 +161,7 @@ struct cros_ec_device {
> int event_size;
> u32 host_event_wake_mask;
> u32 last_resume_result;
> + struct notifier_block notifier_ready;
You should add documentations for this new entry.
>
> /* The platform devices used by the mfd driver */
> struct platform_device *ec;
>
Thanks,
Enric
next prev parent reply other threads:[~2019-11-20 16:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-18 20:00 Yicheng Li
2019-11-20 16:08 ` Enric Balletbo i Serra [this message]
2020-01-16 12:27 ` Fabien Lahoudere
[not found] ` <CAB8_tbG8NSQyLZBizhiKFcfOszOhfi1FFoRAi9SLcFFRTuJDzw@mail.gmail.com>
2020-01-20 11:16 ` Fabien Lahoudere
[not found] ` <CAB8_tbHgZDTUjRzzEcaZCcorHDYrnbJV5+PHZmDz4ymXQ8_QTA@mail.gmail.com>
2020-01-22 11:55 ` Fabien Lahoudere
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64265e5d-abd6-313e-0022-dac3719d7201@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=bleung@chromium.org \
--cc=fabien.lahoudere@collabora.com \
--cc=gwendal@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=yichengli@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®