From: "Torsten Kaiser" <just.for.lkml@googlemail.com>
To: "Andy Whitcroft" <apw@shadowen.org>
Cc: "FUJITA Tomonori" <tomof@acm.org>,
akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
mel@csn.ul.ie, jens.axboe@oracle.com, linux-scsi@vger.kernel.org,
fujita.tomonori@lab.ntt.co.jp
Subject: Re: 2.6.23-rc4-mm1
Date: Fri, 14 Sep 2007 15:01:03 +0200 [thread overview]
Message-ID: <64bb37e0709140601te21f5d0l9871ea03dbf4b135@mail.gmail.com> (raw)
In-Reply-To: <20070914081018.GA20042@shadowen.org>
On 9/14/07, Andy Whitcroft <apw@shadowen.org> wrote:
> On Tue, Sep 11, 2007 at 04:31:12AM +0900, FUJITA Tomonori wrote:
> [...]
> >
> > Even if we revert the qla1280 patch, scsi-ml still sends chaining sg
> > list. So it doesn't work.
> >
> > The following patch disables chaining sg list for qla1280. If the fix
> > that I've just sent doesn't work, please try this.
>
> Ok, the other patch _did_ work, but this got tested anyhow and it did
> _not_ fix things.
>
Sorry to confirm this. My RAID5 got destroyed a second time.
To summarize what worked / not worked / and seems to work for me:
First 2 tries with unpatched rc4-mm1: Both times one sata_sil24-drive got kicked
Then I switched back to rc3-mm1, 18 boots with that kernel worked.
Then I tried the patched rc4-mm1 and it worked too.
The next boot also worked, but the third time kicked a drive out again.
But as nobody reads logs, I did not notice that and keep using the
patched rc4-mm1.
The next 5 times the system worked normally with the two remaining drives.
The sixth boot kicked the second sata_sil24 drive. That I did notice...
After reassembling the RAID, I'm now back to the patch rc4-mm1 that
did boot correctly this time.
So the patch just makes it unlikelier to hit the bug. Instead of
failing 2 out of 2 times, it only failed 2 out of 8 times.
I compared the rc4-mm1 boot from a working case and the case where it
kicked the first drive. Nothing seems to stand out...
< == good rc4-mm1 boot
> == bad rc4-mm1 boot that kicked the drive
145c145
< CPU 0: aperture @ 4000000 size 32 MB
---
> CPU 0: aperture @ b7f0000000 size 32 MB
154c154
< Calibrating delay using timer specific routine.. 5203.23 BogoMIPS
(lpj=26016160)
---
> Calibrating delay using timer specific routine.. 5203.22 BogoMIPS (lpj=26016138)
169c169
< APIC timer calibration result 12499998
---
> APIC timer calibration result 12499994
173c173
< Calibrating delay using timer specific routine.. 5222.40 BogoMIPS
(lpj=26112010)
---
> Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000052)
182c182
< Calibrating delay using timer specific routine.. 5222.73 BogoMIPS
(lpj=26113694)
---
> Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000081)
191c191
< Calibrating delay using timer specific routine.. 5223.07 BogoMIPS
(lpj=26115369)
---
> Calibrating delay using timer specific routine.. 5200.03 BogoMIPS (lpj=26000164)
269d268
< Switched to high resolution mode on CPU 3
270a270
> Switched to high resolution mode on CPU 3
502,509c502,509
< raid6: int64x1 2634 MB/s
< raid6: int64x2 3244 MB/s
< raid6: int64x4 3405 MB/s
< raid6: int64x8 2614 MB/s
< raid6: sse2x1 3607 MB/s
< raid6: sse2x2 4834 MB/s
< raid6: sse2x4 4946 MB/s
< raid6: using algorithm sse2x4 (4946 MB/s)
---
> raid6: int64x1 2680 MB/s
> raid6: int64x2 3232 MB/s
> raid6: int64x4 3411 MB/s
> raid6: int64x8 2620 MB/s
> raid6: sse2x1 3606 MB/s
> raid6: sse2x2 4810 MB/s
> raid6: sse2x4 4910 MB/s
> raid6: using algorithm sse2x4 (4910 MB/s)
567c567
< md1: bitmap initialized from disk: read 10/10 pages, set 96 bits
---
> md1: bitmap initialized from disk: read 10/10 pages, set 104 bits
568a569,655
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata1.00: exception Emask 0x20 SAct 0x1 SErr 0x0 action 0x2
> ata1.00: irq_stat 0x00020002, PCI master abort while fetching SGT
> ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0 cdb 0x0 data 4096 out
> res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x20 (host bus error)
> ata1.00: status: {DRDY }
> ata1: soft resetting link
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
> sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
> Descriptor sense data with sense descriptors (in hex):
> 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> 00 00 00 af
> sd 0:0:0:0: [sda] Add. Sense: No additional sense information
> end_request: I/O error, dev sda, sector 625137161
> ata1: EH complete
> sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> md: super_written gets error=-5, uptodate=0
> raid5: Disk failure on sda2, disabling device. Operation continuing on 2 devices
571a659,663
> RAID5 conf printout:
> --- rd:3 wd:2
> disk 0, o:0, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
576a669,672
> RAID5 conf printout:
> --- rd:3 wd:2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdc2
Another good boot also showed the aperture at a similar high address:
CPU 0: aperture @ b7f2000000 size 32 MB
And that good boot also showed the "correct" BogoMIPS:
Calibrating delay using timer specific routine.. 5205.43 BogoMIPS (lpj=26027183)
Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000052)
Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=26000082)
Calibrating delay using timer specific routine.. 5200.03 BogoMIPS (lpj=26000166)
Anything more I can provide to help debugging this?
Torsten
next prev parent reply other threads:[~2007-09-14 13:01 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-01 4:58 2.6.23-rc4-mm1 Andrew Morton
2007-09-01 6:53 ` 2.6.23-rc4-mm1 KAMEZAWA Hiroyuki
2007-09-01 6:58 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-01 8:54 ` 2.6.23-rc4-mm1 Herbert Xu
2007-09-01 21:09 ` 2.6.23-rc4-mm1 Satyam Sharma
2007-09-02 1:46 ` 2.6.23-rc4-mm1 Herbert Xu
2007-09-02 2:52 ` 2.6.23-rc4-mm1 Satyam Sharma
2007-09-02 3:59 ` 2.6.23-rc4-mm1 Herbert Xu
2007-09-01 11:55 ` 2.6.23-rc4-mm1 Kamalesh Babulal
2007-09-01 14:18 ` 2.6.23-rc4-mm1: geode fb compile error Adrian Bunk
2007-09-01 17:03 ` Satyam Sharma
2007-09-01 15:19 ` 2.6.23-rc4-mm1: two ktime_sub_ns() functions Adrian Bunk
2007-09-01 15:44 ` 2.6.23-rc4-mm1: mips compile error Adrian Bunk
2007-09-04 5:27 ` Mathieu Desnoyers
2007-09-04 10:21 ` Ralf Baechle
2007-09-01 16:07 ` 2.6.23-rc4-mm1 Torsten Kaiser
2007-09-01 16:16 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-01 18:13 ` 2.6.23-rc4-mm1 OOPS in forcedeth? thunder7
2007-09-01 19:05 ` Jeff Garzik
2007-09-02 0:54 ` Satyam Sharma
2007-09-02 5:36 ` thunder7
2007-09-02 6:19 ` thunder7
2007-09-02 9:55 ` Satyam Sharma
2007-09-14 3:51 ` Andrew James Wade
2007-09-17 13:57 ` Dhaval Giani
2007-09-17 14:07 ` Denis V. Lunev
2007-09-17 21:00 ` Vlad Yasevich
2007-09-17 23:56 ` Satyam Sharma
2007-09-01 22:06 ` 2.6.23-rc4-mm1 "no CRC" MODPOST warnings Satyam Sharma
2007-09-01 22:40 ` Adrian Bunk
2007-09-01 23:15 ` Sam Ravnborg
2007-09-01 23:12 ` [PATCH -mm] softlockup-improve-debug-output.patch fix Satyam Sharma
2007-09-02 12:37 ` [PATCH -mm][resend] " Satyam Sharma
2007-09-02 12:28 ` Ingo Molnar
2007-09-06 6:52 ` [PATCH] sched: Use show_regs() to improve __schedule_bug() output Satyam Sharma
2007-10-22 12:35 ` Ingo Molnar
2007-09-03 16:36 ` [PATCH -mm][resend] softlockup-improve-debug-output.patch fix Valdis.Kletnieks
2007-09-01 23:42 ` [PATCH -mm] drivers/acpi/tables/tbutils.c: Shut up bogus uninitialized variable warning Satyam Sharma
2007-09-02 0:19 ` Adrian Bunk
2007-09-02 1:02 ` Satyam Sharma
2007-09-02 1:30 ` [PATCH -mm] net/sched/sch_cbq.c: Shut up " Satyam Sharma
2007-09-02 11:36 ` Patrick McHardy
2007-09-02 2:36 ` 2.6.23-rc4-mm1: unpingable box and NULL dereference at tcp_rto_min() Alexey Dobriyan
2007-09-02 5:02 ` Satyam Sharma
2007-09-02 20:52 ` Andrew Morton
2007-09-02 21:19 ` Alexey Dobriyan
2007-09-02 9:14 ` 2.6.23-rc4-mm1 net bitops compile error Adrian Bunk
2007-09-04 17:53 ` Jiri Slaby
2007-09-02 11:25 ` [-mm patch] IPV6 must select XFRM Adrian Bunk
2007-09-03 10:43 ` Masahide NAKAMURA
2007-09-06 10:01 ` net-26.24 broken with XFRM off Noriaki TAKAMIYA
2007-09-02 13:00 ` [PATCH -mm] drivers/char/nozomi.c: __devexit_p usage build fix Satyam Sharma
2007-09-02 19:01 ` 2.6.23-rc4-mm1: broke pata_via cable detection Laurent Riffard
2007-09-02 19:20 ` Alan Cox
2007-09-11 1:50 ` Jeff Garzik
2007-09-02 20:39 ` 2.6.23-rc4-mm1: boot failure on HPC nx6325 Rafael J. Wysocki
2007-09-03 8:36 ` Thomas Gleixner
2007-09-03 10:15 ` Rafael J. Wysocki
2007-09-03 20:51 ` Rafael J. Wysocki
2007-09-04 1:03 ` Thomas Gleixner
2007-09-03 4:30 ` 2.6.23-rc4-mm1 Randy Dunlap
2007-09-03 19:25 ` 2.6.23-rc4-mm1 Wim Van Sebroeck
2007-09-03 22:32 ` 2.6.23-rc4-mm1 Satyam Sharma
2007-09-04 21:21 ` 2.6.23-rc4-mm1 Wim Van Sebroeck
2007-09-04 17:54 ` 2.6.23-rc4-mm1 Zach Carter
2007-09-04 21:36 ` 2.6.23-rc4-mm1 Stephen Hemminger
2007-09-05 14:37 ` 2.6.23-rc4-mm1 Valdis.Kletnieks
2007-09-05 15:12 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-05 15:20 ` 2.6.23-rc4-mm1 Balbir Singh
2007-09-05 15:58 ` 2.6.23-rc4-mm1 Valdis.Kletnieks
2007-09-05 19:46 ` 2.6.23-rc4-mm1 - git-alsa.patch breaks audio on Dell Latitude D820 Valdis.Kletnieks
2007-09-05 19:54 ` Valdis.Kletnieks
2007-09-05 20:22 ` Takashi Iwai
2007-09-05 20:11 ` Takashi Iwai
2007-09-05 20:27 ` Takashi Iwai
2007-09-05 21:16 ` Valdis.Kletnieks
2007-09-05 21:39 ` Takashi Iwai
2007-09-06 14:10 ` Valdis.Kletnieks
2007-09-06 14:17 ` Takashi Iwai
2007-09-06 19:37 ` 2.6.23-rc4-mm1 myri10ge module link error on x86_64 Mathieu Desnoyers
2007-09-06 20:40 ` David Miller
2007-09-06 20:48 ` David Miller
2007-09-07 23:59 ` Jeff Garzik
2007-09-08 0:25 ` Daniel Walker
2007-10-13 22:03 ` Avuton Olrich
2007-09-09 12:22 ` 2.6.23-rc4-mm1 Mel Gorman
2007-09-14 15:12 ` ath5k driver not working on ThinkPad Robert de Rooy
2007-09-09 20:24 ` [-mm patch] alpha bitops.h must #include <asm/barrier.h> Adrian Bunk
2007-09-09 20:24 ` [-mm patch] remove ide_get_error_location() Adrian Bunk
2007-09-11 21:27 ` Bartlomiej Zolnierkiewicz
2007-09-12 5:54 ` Jens Axboe
2007-09-09 20:24 ` [-mm patch] drivers/dma/ioat_dma.c: make 3 functions static Adrian Bunk
2007-09-09 20:25 ` [-mm patch] usb/serial/ch341.c: make 4 " Adrian Bunk
2007-09-09 20:25 ` [-mm patch] make nfs_wb_page_priority() static Adrian Bunk
2007-09-09 20:25 ` [-mm patch] kernel/kexec.c: make code static Adrian Bunk
2007-09-10 2:55 ` Ken'ichi Ohmichi
2007-09-10 12:20 ` Adrian Bunk
2007-09-11 5:53 ` Maneesh Soni
2007-09-12 7:37 ` Ken'ichi Ohmichi
2007-09-09 20:25 ` [-mm patch] really unexport do_softirq Adrian Bunk
2007-09-12 13:14 ` David Miller
2007-09-09 20:25 ` [-mm patch] unexport raise_softirq_irqoff Adrian Bunk
2007-09-09 20:41 ` Christoph Hellwig
2007-09-12 13:15 ` David Miller
2007-09-09 20:25 ` [-mm patch] mm/memcontrol.c: clenups Adrian Bunk
2007-09-10 8:23 ` Balbir Singh
2007-09-10 19:58 ` Jan Engelhardt
2007-09-10 19:59 ` Jan Engelhardt
2007-09-10 21:59 ` Adrian Bunk
2007-09-11 2:41 ` Balbir Singh
2007-09-09 20:25 ` [-mm patch] net/sctp/socket.c: make 3 variables static Adrian Bunk
2007-09-10 14:05 ` [Lksctp-developers] " Neil Horman
2007-09-12 13:18 ` David Miller
2007-09-09 20:25 ` [-mm patch] make tcp_splice_data_recv() static Adrian Bunk
2007-09-12 13:21 ` David Miller
2007-09-12 17:44 ` Jens Axboe
2007-09-09 20:26 ` [-mm patch] make do_try_to_free_pages() static Adrian Bunk
2007-09-10 8:24 ` Balbir Singh
2007-09-10 17:43 ` 2.6.23-rc4-mm1 -- powerpc per_cpu__cpu_sibling_map compile failure Andy Whitcroft
2007-09-10 17:49 ` 2.6.23-rc4-mm1 Andy Whitcroft
2007-09-10 18:19 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-10 18:59 ` 2.6.23-rc4-mm1 Torsten Kaiser
2007-09-10 19:20 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-10 19:38 ` 2.6.23-rc4-mm1 Torsten Kaiser
2007-09-10 19:42 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-10 20:43 ` 2.6.23-rc4-mm1 Torsten Kaiser
2007-09-11 8:32 ` 2.6.23-rc4-mm1 Jens Axboe
2007-09-10 19:10 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-13 17:34 ` 2.6.23-rc4-mm1 Andy Whitcroft
2007-09-15 4:16 ` 2.6.23-rc4-mm1 Paul Jackson
2007-09-15 10:52 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-17 13:28 ` 2.6.23-rc4-mm1 Jens Axboe
2007-09-17 14:32 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-18 10:18 ` 2.6.23-rc4-mm1 Jens Axboe
2007-09-18 12:25 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-18 12:51 ` 2.6.23-rc4-mm1 Jens Axboe
2007-09-10 19:31 ` 2.6.23-rc4-mm1 FUJITA Tomonori
2007-09-14 8:10 ` 2.6.23-rc4-mm1 Andy Whitcroft
2007-09-14 13:01 ` Torsten Kaiser [this message]
2007-09-14 20:15 ` 2.6.23-rc4-mm1 Andrew Morton
2007-09-10 20:19 ` 2.6.23-rc4-mm1: git-block.patch broke pktcdvd Laurent Riffard
2007-09-13 22:50 ` Laurent Riffard
2007-09-13 23:05 ` Andrew Morton
2007-09-14 8:00 ` Jens Axboe
2007-09-14 8:30 ` Jens Axboe
2007-09-14 9:33 ` Jens Axboe
2007-09-14 11:06 ` Jens Axboe
2007-09-14 19:04 ` Laurent Riffard
2007-09-20 21:25 ` [PATCH] pktcdvd: don't rely on bio_init() preserving bio->bi_destructor Laurent Riffard
2007-09-21 5:19 ` Jens Axboe
2007-09-02 2:56 2.6.23-rc4-mm1 Mats Johannesson
2007-09-03 8:06 ` 2.6.23-rc4-mm1 Nicolas Mailhot
2007-09-04 15:20 ` 2.6.23-rc4-mm1 Alistair John Strachan
2007-09-04 15:26 ` 2.6.23-rc4-mm1 Andi Kleen
2007-09-04 16:05 ` 2.6.23-rc4-mm1 Alistair John Strachan
2007-09-06 7:25 net-26.24 broken with XFRM off Divy Le Ray
2007-09-06 8:13 ` Eric Dumazet
2007-09-06 9:50 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64bb37e0709140601te21f5d0l9871ea03dbf4b135@mail.gmail.com \
--to=just.for.lkml@googlemail.com \
--cc=akpm@linux-foundation.org \
--cc=apw@shadowen.org \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mel@csn.ul.ie \
--cc=tomof@acm.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®