mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jiaxin Yu <jiaxin.yu@mediatek.com>
To: AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>, <broonie@kernel.org>
Cc: <lgirdwood@gmail.com>, <tiwai@suse.com>, <robh+dt@kernel.org>,
	<matthias.bgg@gmail.com>, <perex@perex.cz>,
	<p.zabel@pengutronix.de>, <geert+renesas@glider.be>,
	<trevor.wu@mediatek.com>, <tzungbi@google.com>,
	<aaronyu@google.com>, <zhangqilong3@huawei.com>,
	<alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [v2 01/17] ASoC: mediatek: mt6366: add codec driver
Date: Sat, 5 Mar 2022 12:24:57 +0800	[thread overview]
Message-ID: <6555d89deb9087825f865b9d4265f07465e7ae09.camel@mediatek.com> (raw)
In-Reply-To: <b22976ee-6426-cabf-f153-fbe093611e97@collabora.com>

On Fri, 2022-02-18 at 15:54 +0100, AngeloGioacchino Del Regno wrote:
> Il 17/02/22 14:41, Jiaxin Yu ha scritto:
> > Mt6366 is a new version of mt6358, and they are same about audio
> > part.
> > So we can reuse the driver of mt6358.
> > 
> > Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
> 
> Hello Jiaxin,
> I'm sorry but this commit makes very little sense.
> 
> If you want to advertise MT6366 support, please write a note and/or
> a new compatible string inside of the mt6358 driver (and dt-
> bindings),
> then, please drop this commit.
> 

Hello angelogioacchino,

Thank you for your advice.

If I add a new compatible string inside of the mt6358 driver and dt-
bindings, then the machine driver which want to use mt6366 should
select SND_SOC_MT6358.

like below:

config SND_SOC_MT8186_MT6366_DA7219_MAX98357
	tristate "ASoC Audio driver for MT8186 with DA7219 MAX98357A
codec"
 	depends on I2C && GPIOLIB
 	depends on SND_SOC_MT8186 && MTK_PMIC_WRAP
 	select SND_SOC_MT6366   ==> SND_SOC_MT6358
	...

I just doubt it's enough to make sense. I originally wanted to put this
relationship in the sound/soc/codecs layer. So that this relationship
is not perceived by users(machine driver).
However, if the general practice is like this, I will adopt your
suggestion. Thank you again.

> 
> > ---
> >   sound/soc/codecs/Kconfig  | 8 ++++++++
> >   sound/soc/codecs/Makefile | 1 +
> >   2 files changed, 9 insertions(+)
> > 
> > diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> > index 8fa24783ce01..6631094678f5 100644
> > --- a/sound/soc/codecs/Kconfig
> > +++ b/sound/soc/codecs/Kconfig
> > @@ -132,6 +132,7 @@ config SND_SOC_ALL_CODECS
> >   	imply SND_SOC_MT6351
> >   	imply SND_SOC_MT6358
> >   	imply SND_SOC_MT6359
> > +	imply SND_SOC_MT6366
> >   	imply SND_SOC_MT6660
> >   	imply SND_SOC_NAU8315
> >   	imply SND_SOC_NAU8540
> > @@ -1888,6 +1889,13 @@ config SND_SOC_MT6359_ACCDET
> >   	  for ASoC codec soc-jack detection mechanism.
> >   	  Select N if you don't have jack on board.
> >   
> > +config SND_SOC_MT6366
> > +	tristate "MediaTek MT6366 Codec"
> > +	depends on MTK_PMIC_WRAP
> > +	help
> > +	  Enable support for the platform which uses MT6366 as
> > +	  external codec device.
> > +
> >   config SND_SOC_MT6660
> >   	tristate "Mediatek MT6660 Speaker Amplifier"
> >   	depends on I2C
> > diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> > index 42d00aa4ee46..1279684feaf0 100644
> > --- a/sound/soc/codecs/Makefile
> > +++ b/sound/soc/codecs/Makefile
> > @@ -465,6 +465,7 @@ obj-$(CONFIG_SND_SOC_MT6351)	+= snd-soc-
> > mt6351.o
> >   obj-$(CONFIG_SND_SOC_MT6358)	+= snd-soc-mt6358.o
> >   obj-$(CONFIG_SND_SOC_MT6359)	+= snd-soc-mt6359.o
> >   obj-$(CONFIG_SND_SOC_MT6359_ACCDET) += mt6359-accdet.o
> > +obj-$(CONFIG_SND_SOC_MT6366)	+= snd-soc-mt6358.o
> >   obj-$(CONFIG_SND_SOC_MT6660)	+= snd-soc-mt6660.o
> >   obj-$(CONFIG_SND_SOC_NAU8315)   += snd-soc-nau8315.o
> >   obj-$(CONFIG_SND_SOC_NAU8540)   += snd-soc-nau8540.o
> 
> 


  reply	other threads:[~2022-03-05  4:25 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-17 13:41 [v2 00/17] ASoC: mediatek: Add support for MT8186 SoC Jiaxin Yu
2022-02-17 13:41 ` [v2 01/17] ASoC: mediatek: mt6366: add codec driver Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05  4:24     ` Jiaxin Yu [this message]
2022-03-07  9:07       ` AngeloGioacchino Del Regno
2022-02-17 13:41 ` [v2 02/17] ASoC: mediatek: mt8186: support audsys clock control Jiaxin Yu
2022-02-17 13:41 ` [v2 03/17] ASoC: mediatek: mt8186: support adda in platform driver Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05 10:49     ` Jiaxin Yu
2022-03-07  9:25       ` AngeloGioacchino Del Regno
2022-02-17 13:41 ` [v2 04/17] ASoC: mediatek: mt8186: support hostless " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-02-17 13:41 ` [v2 05/17] ASoC: mediatek: mt8186: support hw gain " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-02-17 13:41 ` [v2 06/17] ASoC: mediatek: mt8186: support i2s " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05 11:07     ` Jiaxin Yu
2022-02-17 13:41 ` [v2 07/17] ASoC: mediatek: mt8186: support pcm " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05 11:12     ` Jiaxin Yu
2022-02-17 13:41 ` [v2 08/17] ASoC: mediatek: mt8186: support src " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-02-17 13:41 ` [v2 09/17] ASoC: mediatek: mt8186: support tdm " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-03 14:10     ` Jiaxin Yu
2022-03-03 15:08       ` AngeloGioacchino Del Regno
2022-03-03 17:39         ` Jiaxin Yu
2022-02-17 13:41 ` [v2 10/17] ASoC: mediatek: mt8186: support audio clock control " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-03 15:16     ` Jiaxin Yu
2022-03-03 15:17     ` Jiaxin Yu
2022-02-17 13:41 ` [v2 11/17] ASoC: mediatek: mt8186: support gpio " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-03 15:30     ` Jiaxin Yu
2022-02-17 13:42 ` [v2 12/17] ASoC: mediatek: mt8186: add " Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05  9:10     ` Jiaxin Yu
2022-02-17 13:42 ` [v2 13/17] dt-bindings: mediatek: mt8186: add audio afe document Jiaxin Yu
2022-02-25 16:43   ` Rob Herring
2022-02-17 13:42 ` [v2 14/17] ASoC: mediatek: mt8186: add machine driver with mt6366, da7219 and max98357 Jiaxin Yu
2022-02-18 14:54   ` AngeloGioacchino Del Regno
2022-03-05  8:58     ` Jiaxin Yu
2022-03-07  9:14       ` AngeloGioacchino Del Regno
2022-02-17 13:42 ` [v2 15/17] dt-bindings: mediatek: mt8186: add mt8186-mt6366-da7219-max98357 document Jiaxin Yu
2022-02-17 13:42 ` [v2 16/17] ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s Jiaxin Yu
2022-02-17 13:42 ` [v2 17/17] dt-bindings: mediatek: mt8186: add mt8186-mt6366-rt1019-rt5682s document Jiaxin Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6555d89deb9087825f865b9d4265f07465e7ae09.camel@mediatek.com \
    --to=jiaxin.yu@mediatek.com \
    --cc=aaronyu@google.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=trevor.wu@mediatek.com \
    --cc=tzungbi@google.com \
    --cc=zhangqilong3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®