From: Jarkko Nikula <jarkko.nikula@bitmer.com>
To: Joseph Telaak <joseph@telaak.dev>, Sen Wang <sen@ti.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] ASoC: ti: omap-mcbsp: Implement set_tdm_slot
Date: Tue, 17 Nov 2026 21:14:54 +0200 [thread overview]
Message-ID: <65ea5216-9c1c-409a-9a67-7053bbf07cd3@bitmer.com> (raw)
In-Reply-To: <20261116-omap-mcbsp-tdm-slot-v1-2-6c9f7aa45a29@telaak.dev>
Hi
On 11/17/26 12:03 AM, Joseph Telaak wrote:
> As bit clock and frame provider, McBSP sizes the frame from the SRG
> input, the set_clkdiv() divider and the rate. Only a machine driver can
> call set_clkdiv(), so with simple-audio-card or audio-graph-card the
> divider stays 1 and the bit clock runs at the full SRG input: 96 MHz on
> OMAP3, a 2000-bit frame at 48 kHz.
>
> Implement set_tdm_slot() so these cards can ask for a frame of slots x
> slot_width bit clocks with dai-tdm-slot-num and dai-tdm-slot-width.
> hw_params() then picks the divider for the rate, and startup() offers
> only the rates the SRG input divides to within 0.1%, the IEC 60958 level
> II clock tolerance. McBSP sends a frame's words back to back, so
> startup() also limits the sample width to the slot width and the
> channels to the active slots, which must be the low ones, and refuses
> I2S or left-justified with other than two slots. This applies only when
> McBSP provides both clocks; without slots nothing changes.
>
> Tested on an OMAP3630 board whose McBSP4 drives the I2S input of an
> ADV7513 with no MCLK, with 2 x 32-bit slots and adv7511 taking S32_LE:
> a left-only and a right-only 44.1 kHz tone each play at full level
> (96 MHz / 34 gives 44117.6 Hz), 48 kHz (0.8% off) and S16_LE are
> refused.
>
> Signed-off-by: Joseph Telaak <joseph@telaak.dev>
> ---
> sound/soc/ti/omap-mcbsp-priv.h | 4 ++
> sound/soc/ti/omap-mcbsp.c | 155 ++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 158 insertions(+), 1 deletion(-)
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
next prev parent reply other threads:[~2026-11-17 19:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 22:03 [PATCH 0/2] ASoC: ti: omap-mcbsp: TDM slots for generic cards Joseph Telaak
2026-11-16 22:03 ` [PATCH 1/2] ASoC: ti: omap-mcbsp: Use all 8 bits of CLKGDV Joseph Telaak
2026-11-17 19:12 ` Jarkko Nikula
2026-11-16 22:03 ` [PATCH 2/2] ASoC: ti: omap-mcbsp: Implement set_tdm_slot Joseph Telaak
2026-11-17 19:14 ` Jarkko Nikula [this message]
2026-11-17 22:11 ` Mark Brown
2026-11-18 5:09 ` Joseph Telaak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=65ea5216-9c1c-409a-9a67-7053bbf07cd3@bitmer.com \
--to=jarkko.nikula@bitmer.com \
--cc=broonie@kernel.org \
--cc=joseph@telaak.dev \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sen@ti.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®