mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* Re[4]: VIA686A chipset crash under 2.4.2-ac20
       [not found] <Pine.LNX.4.10.10103151157400.28602-100000@coffee.psychology.mcmaster.ca>
@ 2001-03-16  0:33 ` kozkir-8
  2001-03-16  0:38 ` kozkir-8
  1 sibling, 0 replies; 2+ messages in thread
From: kozkir-8 @ 2001-03-16  0:33 UTC (permalink / raw)
  To: Mark Hahn; +Cc: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: MD5



>> >> kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
>>
>> MH> this can only be caused by bad cable/config.  is it 18", with both ends
>> MH> plugged in?
>>
>>
>> Do you mean 40-pin E-IDE cable?

MH> 40-conductor cables are only valid to use up to udma33, but 80c cables
MH> will *always* help, and can be used in any mode.  but equally important
MH> is that the cable must never be longer than 18", with both ends plugged in
MH> (no stub).

I measured the cable and it is aprox. 45cm (18") and it is 80c.
It has also 3 connectors, two of them are in use (on the ends), and
one is free (in the middle). I also checked the connections on
motherboard and on disk, they are both ok.

-----BEGIN PGP SIGNATURE-----
Version: 2.6

iQCVAwUAOrFfcT5SQymVx3NvAQEmwQP/bMQYXekwlUDKPdQ80khqfkv45TCY8lVd
r6lXb82s60vvbEpCTyF16E4TwQkwirsPf5virJ0jZO+EBFRVwOhDFitbaF9PdHhG
MdSFtST6JrhwozsoU3LgkdMZb3Mnnw7YsV9ctOZij+4WN5SDd5IO5YNXgeWgrdLb
c+jZzBpmLK8=
=PvVG
-----END PGP SIGNATURE-----



^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re[4]: VIA686A chipset crash under 2.4.2-ac20
       [not found] <Pine.LNX.4.10.10103151157400.28602-100000@coffee.psychology.mcmaster.ca>
  2001-03-16  0:33 ` Re[4]: VIA686A chipset crash under 2.4.2-ac20 kozkir-8
@ 2001-03-16  0:38 ` kozkir-8
  1 sibling, 0 replies; 2+ messages in thread
From: kozkir-8 @ 2001-03-16  0:38 UTC (permalink / raw)
  To: Mark Hahn; +Cc: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: MD5


>> >> kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
>>
>> MH> this can only be caused by bad cable/config.  is it 18", with both ends
>> MH> plugged in?
>>
>>
>> Do you mean 40-pin E-IDE cable?

MH> 40-conductor cables are only valid to use up to udma33, but 80c cables
MH> will *always* help, and can be used in any mode.  but equally important
MH> is that the cable must never be longer than 18", with both ends plugged in
MH> (no stub).


Forgot one think!
When I recompiled the kernel with DMA support I got speed on HDD only
16Mb/sec according to hdparm.

-----BEGIN PGP SIGNATURE-----
Version: 2.6

iQCVAwUAOrFgcD5SQymVx3NvAQFz8gP/XRXrfuFLdds2neck7RiNPPFjcrunEmnL
KAXQBPCr+IT4E8hKZ+IxYjMZooBO68jnNMM4NqzuxDs0bcS4pWwVjln4X2ZQC/vu
iKUWLaeOzGcR7oM9a53h8xFkZTgLYJuChPFxdTyug7ZjPKMbKoOzln/5ShI1Cepn
VdyMwLGb56M=
=nome
-----END PGP SIGNATURE-----



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-03-16  0:54 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <Pine.LNX.4.10.10103151157400.28602-100000@coffee.psychology.mcmaster.ca>
2001-03-16  0:33 ` Re[4]: VIA686A chipset crash under 2.4.2-ac20 kozkir-8
2001-03-16  0:38 ` kozkir-8

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®