mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Francesco Dolcini <francesco@dolcini.it>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
	linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1] Revert "phy: freescale: fsl-samsung-hdmi: initialize default rate"
Date: Tue, 17 Nov 2026 08:38:35 +0100	[thread overview]
Message-ID: <6728394.mvXUDI8C0e@steina-w> (raw)
In-Reply-To: <20261116162409.218059-1-francesco@dolcini.it>

Am Montag, 16. November 2026, 17:24:08 Mitteleuropäische Normalzeit schrieb Francesco Dolcini:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> This reverts commit c01ccf91b257741e9edc374a465126bae9ae4711.
> 
> Programming the 74.25 MHz configuration at probe fails on i.MX8MP boards,
> the PHY probe aborts and HDMI is no longer available:
> 
>   fsl-samsung-hdmi-phy 32fdff00.phy: PLL failed to lock
>   fsl-samsung-hdmi-phy 32fdff00.phy: error -ETIMEDOUT: failed to configure default rate
>   fsl-samsung-hdmi-phy 32fdff00.phy: probe with driver fsl-samsung-hdmi-phy failed with error -110
> 
> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Closes: https://lore.kernel.org/all/13219248.O9o76ZdvQC@steina-w/
> Fixes: c01ccf91b257 ("phy: freescale: fsl-samsung-hdmi: initialize default rate")
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Revert works as expected:
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> ---
>  drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 59 +++++---------------
>  1 file changed, 15 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> index aaa651abcbc6..d7418c2197c9 100644
> --- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -44,8 +44,6 @@
>  #define MHZ	(1000UL * 1000UL)
>  #endif
>  
> -#define PHY_DEFAULT_RATE	74250000
> -
>  #define PHY_PLL_DIV_REGS_NUM 7
>  
>  struct phy_config {
> @@ -491,6 +489,17 @@ static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
>  	return ret;
>  }
>  
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> +	if (!phy->cur_cfg)
> +		return 74250000;
> +
> +	return phy->cur_cfg->pixclk;
> +}
> +
>  /* Helper function to lookup the available fractional-divider rate */
>  static const struct phy_config *fsl_samsung_hdmi_phy_lookup_rate(unsigned long rate)
>  {
> @@ -511,14 +520,6 @@ static const struct phy_config *fsl_samsung_hdmi_phy_lookup_rate(unsigned long r
>  		&phy_pll_cfg[i] : &phy_pll_cfg[i+1]);
>  }
>  
> -static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> -					 unsigned long parent_rate)
> -{
> -	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> -
> -	return phy->cur_cfg->pixclk;
> -}
> -
>  static void fsl_samsung_hdmi_calculate_phy(struct phy_config *cal_phy, unsigned long rate,
>  				    u8 p, u16 m, u8 s)
>  {
> @@ -639,7 +640,6 @@ static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
>  
>  static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
>  {
> -	const struct phy_config *default_cfg;
>  	struct fsl_samsung_hdmi_phy *phy;
>  	int ret;
>  
> @@ -664,23 +664,6 @@ static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
>  		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
>  				     "failed to get ref clk\n");
>  
> -	/*
> -	 * Establish the rate reported by recalc_rate() before registering the
> -	 * clock. Otherwise CCF may skip the first set_rate() when it requests
> -	 * the assumed default rate, leaving the PHY unconfigured.
> -	 */
> -	ret = clk_prepare_enable(phy->refclk);
> -	if (ret)
> -		return dev_err_probe(phy->dev, ret,
> -				     "failed to enable ref clk\n");
> -
> -	default_cfg = fsl_samsung_hdmi_phy_lookup_rate(PHY_DEFAULT_RATE);
> -	ret = fsl_samsung_hdmi_phy_configure(phy, default_cfg);
> -	clk_disable_unprepare(phy->refclk);
> -	if (ret)
> -		return dev_err_probe(phy->dev, ret,
> -				     "failed to configure default rate\n");
> -
>  	pm_runtime_get_noresume(phy->dev);
>  	pm_runtime_set_active(phy->dev);
>  	pm_runtime_enable(phy->dev);
> @@ -719,7 +702,7 @@ static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
>  static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
>  {
>  	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> -	int ret;
> +	int ret = 0;
>  
>  	ret = clk_prepare_enable(phy->apbclk);
>  	if (ret) {
> @@ -727,23 +710,11 @@ static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
>  		return ret;
>  	}
>  
> -	if (!phy->cur_cfg)
> -		return 0;
> -
> -	ret = clk_prepare_enable(phy->refclk);
> -	if (ret) {
> -		dev_err(phy->dev, "failed to enable ref clk\n");
> -		goto disable_apbclk;
> -	}
> -
> -	ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> -	clk_disable_unprepare(phy->refclk);
> -	if (!ret)
> -		return 0;
> +	if (phy->cur_cfg)
> +		ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
>  
> -disable_apbclk:
> -	clk_disable_unprepare(phy->apbclk);
>  	return ret;
> +
>  }
>  
>  static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/



      reply	other threads:[~2026-11-17  7:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 16:24 Francesco Dolcini
2026-11-17  7:38 ` Alexander Stein [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6728394.mvXUDI8C0e@steina-w \
    --to=alexander.stein@ew.tq-group.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=francesco@dolcini.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®