From: syzbot <syzbot+06ec7624018233e17113@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com
Subject: Forwarded: Re: [syzbot] [kernel?] WARNING: kobject bug in goku_remove
Date: Tue, 25 Aug 2026 20:10:06 -0700 [thread overview]
Message-ID: <6a8e590e.91706f20.ef82.0012.GAE@google.com> (raw)
In-Reply-To: <6a7e2ce8.f70deec7.2acc03.000c.GAE@google.com>
For archival purposes, forwarding an incoming command email to
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com.
***
Subject: Re: [syzbot] [kernel?] WARNING: kobject bug in goku_remove
Author: chenglingfei@foxmail.com
#syz test: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 3aa1dcaa4f6f5ae08936491e08bd456f331f2d40
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index ac2a984c2f87..7af6da63e83b 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -20,6 +20,7 @@
// #define VERBOSE /* extra debug messages (success too) */
// #define USB_TRACE /* packet-level success messages */
+#include <linux/container_of.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -1052,8 +1053,6 @@ static inline const char *dmastr(void)
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-static const char proc_node_name [] = "driver/udc";
-
#define FOURBITS "%s%s%s%s"
#define EIGHTBITS FOURBITS FOURBITS
@@ -1701,7 +1700,7 @@ static irqreturn_t goku_irq(int irq, void *_dev)
static void gadget_release(struct device *_dev)
{
- struct goku_udc *dev = dev_get_drvdata(_dev);
+ struct goku_udc *dev = container_of(_dev, struct goku_udc, gadget.dev);
kfree(dev);
}
@@ -1714,12 +1713,13 @@ static void goku_remove(struct pci_dev *pdev)
DBG(dev, "%s\n", __func__);
- usb_del_gadget_udc(&dev->gadget);
+ if (dev->added)
+ usb_del_gadget(&dev->gadget);
BUG_ON(dev->driver);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
- remove_proc_entry(proc_node_name, NULL);
+ proc_remove(dev->proc_entry);
#endif
if (dev->regs)
udc_reset(dev);
@@ -1736,6 +1736,8 @@ static void goku_remove(struct pci_dev *pdev)
dev->regs = NULL;
INFO(dev, "unbind\n");
+
+ usb_put_gadget(&dev->gadget);
}
/* wrap this driver around the specified pci device, but
@@ -1748,19 +1750,19 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
unsigned long resource, len;
void __iomem *base = NULL;
int retval;
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ char proc_node_name[64];
+#endif
if (!pdev->irq) {
printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
- retval = -ENODEV;
- goto err;
+ return -ENODEV;
}
/* alloc, and start init */
dev = kzalloc_obj(*dev);
- if (!dev) {
- retval = -ENOMEM;
- goto err;
- }
+ if (!dev)
+ return -ENOMEM;
pci_set_drvdata(pdev, dev);
spin_lock_init(&dev->lock);
@@ -1771,6 +1773,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* the "gadget" abstracts/virtualizes the controller */
dev->gadget.name = driver_name;
+ usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release);
+
/* now all the pci goodies ... */
retval = pci_enable_device(pdev);
if (retval < 0) {
@@ -1815,21 +1819,21 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
- proc_create_single_data(proc_node_name, 0, NULL, udc_proc_read, dev);
+ snprintf(proc_node_name, sizeof(proc_node_name), "driver/goku_udc-%s",
+ pci_name(pdev));
+ dev->proc_entry = proc_create_single_data(proc_node_name, 0, NULL,
+ udc_proc_read, dev);
#endif
- retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
- gadget_release);
+ retval = usb_add_gadget(&dev->gadget);
if (retval)
goto err;
+ dev->added = 1;
return 0;
err:
- if (dev)
- goku_remove (pdev);
- /* gadget_release is not registered yet, kfree explicitly */
- kfree(dev);
+ goku_remove(pdev);
return retval;
}
diff --git a/drivers/usb/gadget/udc/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h
index 70023d401079..0ca2d49d25ba 100644
--- a/drivers/usb/gadget/udc/goku_udc.h
+++ b/drivers/usb/gadget/udc/goku_udc.h
@@ -247,7 +247,12 @@ struct goku_udc {
got_region:1,
req_config:1,
configured:1,
- enabled:1;
+ enabled:1,
+ added:1;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ struct proc_dir_entry *proc_entry;
+#endif
/* pci state used to access those endpoints */
struct pci_dev *pdev;
@@ -286,4 +291,3 @@ struct goku_udc {
xprintk(dev , KERN_WARNING , fmt , ## args)
#define INFO(dev,fmt,args...) \
xprintk(dev , KERN_INFO , fmt , ## args)
-
next prev parent reply other threads:[~2026-08-26 3:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 20:45 syzbot
2026-08-26 2:11 ` Forwarded: " syzbot
2026-08-26 3:10 ` syzbot [this message]
2026-08-26 8:03 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a8e590e.91706f20.ef82.0012.GAE@google.com \
--to=syzbot+06ec7624018233e17113@syzkaller.appspotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®