Re: [PATCH v4 08/17] iio: adc: ad7768-1: convert driver to use regmap

[David Lechner <dlechner@baylibre.com>]

On 4/1/25 11:31 AM, David Lechner wrote:
> On 3/6/25 3:02 PM, Jonathan Santos wrote:
>> Convert the AD7768-1 driver to use the regmap API for register
>> access. This change simplifies and standardizes register interactions,
>> reducing code duplication and improving maintainability.
>>
>> Create two regmap configurations, one for 8-bit register values and
>> other for 24-bit register values.
>>
>> Since we are using regmap now, define the remaining registers from 0x32
>> to 0x34.
>>
>> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
>> ---
> 
> Reviewed-by: David Lechner <dlechner@baylibre.com>
> 
>> +static const struct regmap_range ad7768_regmap_rd_ranges[] = {
>> +	regmap_reg_range(AD7768_REG_CHIP_TYPE, AD7768_REG_DIG_DIAG_ENABLE),
> 
> Technically, there are a few holes in here where registers are not defined
> so we could split this up in to a few ranges to only include registers that
> actually contain a useful value.
> 
>> +	regmap_reg_range(AD7768_REG_MASTER_STATUS, AD7768_REG_COEFF_CONTROL),
>> +	regmap_reg_range(AD7768_REG_ACCESS_KEY, AD7768_REG_ACCESS_KEY),
>> +};
>>  

Also just realized we can drop the AD7768_RD_FLAG_MSK and AD7768_WR_FLAG_MSK
macro definitions in this patch.