* S.M.A.R.T. command passthru to Firewire devices
@ 2005-11-24 14:01 Bernd Bartmann
2005-11-24 15:58 ` Alan Cox
0 siblings, 1 reply; 3+ messages in thread
From: Bernd Bartmann @ 2005-11-24 14:01 UTC (permalink / raw)
To: linux-kernel
When I try to run "smartctl -a /dev/sdb" it tells me that "Device does
not support SMART". /dev/sdb is a normal hdd in an external firewire
enclosure. To me this looks like the firewire SCSI layer does not
support the passthru of the S.M.A.R.T. commands. Or is there any other
way to query the S.M.A.R.T. status of an hdd attached via Firewire?
Thanks,
Bernd.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: S.M.A.R.T. command passthru to Firewire devices
2005-11-24 15:58 ` Alan Cox
@ 2005-11-24 15:30 ` Bernd Bartmann
0 siblings, 0 replies; 3+ messages in thread
From: Bernd Bartmann @ 2005-11-24 15:30 UTC (permalink / raw)
To: Alan Cox; +Cc: linux-kernel
On 11/24/05, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> On Iau, 2005-11-24 at 15:01 +0100, Bernd Bartmann wrote:
> > When I try to run "smartctl -a /dev/sdb" it tells me that "Device does
> > not support SMART". /dev/sdb is a normal hdd in an external firewire
> > enclosure. To me this looks like the firewire SCSI layer does not
> > support the passthru of the S.M.A.R.T. commands. Or is there any other
> > way to query the S.M.A.R.T. status of an hdd attached via Firewire?
>
> If it takes an ATA drive then you will probably be seeing the fact that
> most firewire<->ATA convertor units don't support SMART so don't offer
> it over their SCSI interface.
So this means it is a problem of the firmware in the Firewire
enclosure? Are there any known enclosures that do support this
feature?
Best regards,
Bernd.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: S.M.A.R.T. command passthru to Firewire devices
2005-11-24 14:01 S.M.A.R.T. command passthru to Firewire devices Bernd Bartmann
@ 2005-11-24 15:58 ` Alan Cox
2005-11-24 15:30 ` Bernd Bartmann
0 siblings, 1 reply; 3+ messages in thread
From: Alan Cox @ 2005-11-24 15:58 UTC (permalink / raw)
To: Bernd Bartmann; +Cc: linux-kernel
On Iau, 2005-11-24 at 15:01 +0100, Bernd Bartmann wrote:
> When I try to run "smartctl -a /dev/sdb" it tells me that "Device does
> not support SMART". /dev/sdb is a normal hdd in an external firewire
> enclosure. To me this looks like the firewire SCSI layer does not
> support the passthru of the S.M.A.R.T. commands. Or is there any other
> way to query the S.M.A.R.T. status of an hdd attached via Firewire?
If it takes an ATA drive then you will probably be seeing the fact that
most firewire<->ATA convertor units don't support SMART so don't offer
it over their SCSI interface.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-11-24 15:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-24 14:01 S.M.A.R.T. command passthru to Firewire devices Bernd Bartmann
2005-11-24 15:58 ` Alan Cox
2005-11-24 15:30 ` Bernd Bartmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®