Re: [PATCH 2/2] soc: bcm: add PM driver for Broadcom's PMB

["Rafał Miłecki" <rafal@milecki.pl>]

On 14.12.2020 18:32, Florian Fainelli wrote:
> On 12/14/20 4:24 AM, Rafał Miłecki wrote:
>> On 11.12.2020 23:08, Florian Fainelli wrote:
>>> On 12/11/20 1:59 PM, Rafał Miłecki wrote:
>>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>>
>>>> PMB can be found on BCM4908 and many other chipsets (e.g. BCM63138).
>>>> It's needed to power on and off SoC blocks like PCIe, SATA, USB.
>>>>
>>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> I will do a more thorough review tonight, however do you mind moving the
>>> driver under drives/soc/bcm/bcm63xx? The first SoC that had PMB was
>>> 63138 and that one is DSL.
>>
>> I now realized that bcm63xx's:
>> * Kconfig is wrapper in: if SOC_BCM63XX
>> * Makefile is conditional: obj-$(CONFIG_SOC_BCM63XX)
>>
>> So it means I've to either:
>> 1. Refactor bcm63xx structure
>> 2. Make SOC_BCM63XX selectable on ARCH_BCM4908 and select it
>>
>> I'm not sure if any of above is a really good idea. Any further thought,
>> ideas?
> 
> Well, I was thinking about thing along those lines below, it's really
> about putting drivers that belong to the same SoC family in the same
> basket for easier maintenance while submitting patches/pull requests
> from my side.
> 
> diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
> index 7bc90e0bd773..0f0efa28d92b 100644
> --- a/drivers/soc/bcm/Makefile
> +++ b/drivers/soc/bcm/Makefile
> @@ -1,5 +1,5 @@
>   # SPDX-License-Identifier: GPL-2.0-only
>   obj-$(CONFIG_BCM2835_POWER)    += bcm2835-power.o
>   obj-$(CONFIG_RASPBERRYPI_POWER)        += raspberrypi-power.o
> -obj-$(CONFIG_SOC_BCM63XX)      += bcm63xx/
> +obj-y                          += bcm63xx/
>   obj-$(CONFIG_SOC_BRCMSTB)      += brcmstb/
> diff --git a/drivers/soc/bcm/bcm63xx/Kconfig
> b/drivers/soc/bcm/bcm63xx/Kconfig
> index 16f648a6c70a..76fb61e7377e 100644
> --- a/drivers/soc/bcm/bcm63xx/Kconfig
> +++ b/drivers/soc/bcm/bcm63xx/Kconfig
> @@ -10,3 +10,8 @@ config BCM63XX_POWER
>            BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
> 
>   endif # SOC_BCM63XX
> +
> +config BCM_PMB_POWER
> +       tristate "Broadcom PMB bus power domain driver"
> +       depends on BMIPS_GENERIC || ARCH_BCM4908 || COMPILE_TEST
> +       default ARCH_BCM4908

Sounds OK to me, thanks for clarifying what approach you're OK with!