Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller

[Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>]

On 10/5/2023 12:42 AM, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
>
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
>   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
>   			status = "disabled";
>   		};
>   
> +		blsp_dma: dma-controller@7884000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x07884000 0x1d000>;
> +			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "bam_clk";
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +		};
> +
>   		blsp1_uart1: serial@78af000 {
>   			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>   			reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
>   			status = "disabled";
>   		};
>   
> +		blsp1_spi1: spi@78b5000 {
> +			compatible = "qcom,spi-qup-v2.2.1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x78b5000 0x600>;


Please pad the address part to 8 hex digits with leading zeroes. With that,

Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>


> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> +				 <&gcc GCC_BLSP1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
>   		intc: interrupt-controller@b000000 {
>   			compatible = "qcom,msm-qgic2";
>   			reg = <0x0b000000 0x1000>,  /* GICD */