* usb/media/hdpvr: trying to register non-static key in hdpvr_probe
@ 2017-09-21 15:39 Andrey Konovalov
2017-09-22 7:41 ` Arvind Yadav
0 siblings, 1 reply; 5+ messages in thread
From: Andrey Konovalov @ 2017-09-21 15:39 UTC (permalink / raw)
To: Hans Verkuil, Mauro Carvalho Chehab, Laurent Pinchart,
Arvind Yadav, linux-media, LKML
Cc: Dmitry Vyukov, Kostya Serebryany, syzkaller
Hi!
I've got the following report while fuzzing the kernel with syzkaller.
On commit ebb2c2437d8008d46796902ff390653822af6cc4 (Sep 18).
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #215
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
__lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
hdpvr_probe+0x233/0x20d0 drivers/media/usb/hdpvr/hdpvr-core.c:400
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
really_probe drivers/base/dd.c:413
driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
device_add+0xd0b/0x1660 drivers/base/core.c:1835
usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
really_probe drivers/base/dd.c:413
driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
device_add+0xd0b/0x1660 drivers/base/core.c:1835
usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
hub_port_connect drivers/usb/core/hub.c:4903
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x3a1/0x470 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
hdpvr: probe of 1-1:8.217 failed with error -12
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: usb/media/hdpvr: trying to register non-static key in hdpvr_probe
2017-09-21 15:39 usb/media/hdpvr: trying to register non-static key in hdpvr_probe Andrey Konovalov
@ 2017-09-22 7:41 ` Arvind Yadav
2017-09-22 11:46 ` Andrey Konovalov
0 siblings, 1 reply; 5+ messages in thread
From: Arvind Yadav @ 2017-09-22 7:41 UTC (permalink / raw)
To: Andrey Konovalov, Hans Verkuil, Mauro Carvalho Chehab,
Laurent Pinchart, linux-media, LKML
Cc: Dmitry Vyukov, Kostya Serebryany, syzkaller
Hi,
I have a doubt. Why we are calling flush_work in hdpvr_probe for every
failure.
We are flushing work which is not defined yet.
Here, hdpvr_register_videodev() is responsible for setup and register a
video device.
Also defining and initializing a worker. we are calling
hdpvr_register_videodev() at last.
No need to flash any work here.
Please correct me, if I am wrong.
On Thursday 21 September 2017 09:09 PM, Andrey Konovalov wrote:
> Hi!
>
> I've got the following report while fuzzing the kernel with syzkaller.
>
> On commit ebb2c2437d8008d46796902ff390653822af6cc4 (Sep 18).
>
> INFO: trying to register non-static key.
> the code is fine but needs lockdep annotation.
> turning off the locking correctness validator.
> CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #215
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
> Workqueue: usb_hub_wq hub_event
> Call Trace:
> __dump_stack lib/dump_stack.c:16
> dump_stack+0x292/0x395 lib/dump_stack.c:52
> register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
> __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
> lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
> flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
> hdpvr_probe+0x233/0x20d0 drivers/media/usb/hdpvr/hdpvr-core.c:400
> usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
> really_probe drivers/base/dd.c:413
> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
> device_add+0xd0b/0x1660 drivers/base/core.c:1835
> usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
> generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
> usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
> really_probe drivers/base/dd.c:413
> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
> device_add+0xd0b/0x1660 drivers/base/core.c:1835
> usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
> hub_port_connect drivers/usb/core/hub.c:4903
> hub_port_connect_change drivers/usb/core/hub.c:5009
> port_event drivers/usb/core/hub.c:5115
> hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
> process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
> worker_thread+0x221/0x1850 kernel/workqueue.c:2253
> kthread+0x3a1/0x470 kernel/kthread.c:231
> ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
> hdpvr: probe of 1-1:8.217 failed with error -12
~arvind
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: usb/media/hdpvr: trying to register non-static key in hdpvr_probe
2017-09-22 7:41 ` Arvind Yadav
@ 2017-09-22 11:46 ` Andrey Konovalov
2017-09-22 13:09 ` Arvind Yadav
0 siblings, 1 reply; 5+ messages in thread
From: Andrey Konovalov @ 2017-09-22 11:46 UTC (permalink / raw)
To: Arvind Yadav
Cc: Hans Verkuil, Mauro Carvalho Chehab, Laurent Pinchart,
linux-media, LKML, Dmitry Vyukov, Kostya Serebryany, syzkaller
On Fri, Sep 22, 2017 at 9:41 AM, Arvind Yadav <arvind.yadav.cs@gmail.com> wrote:
> Hi,
>
> I have a doubt. Why we are calling flush_work in hdpvr_probe for every
> failure.
> We are flushing work which is not defined yet.
>
> Here, hdpvr_register_videodev() is responsible for setup and register a
> video device.
> Also defining and initializing a worker. we are calling
> hdpvr_register_videodev() at last.
> No need to flash any work here.
>
> Please correct me, if I am wrong.
Hi Arvind,
I believe you're right, no need to call flush_work() before
dev->worker is initialized.
Could you send a fix?
I'm able to reproduce the issue, so I can test your patches if needed.
Thanks!
>
>
> On Thursday 21 September 2017 09:09 PM, Andrey Konovalov wrote:
>>
>> Hi!
>>
>> I've got the following report while fuzzing the kernel with syzkaller.
>>
>> On commit ebb2c2437d8008d46796902ff390653822af6cc4 (Sep 18).
>>
>> INFO: trying to register non-static key.
>> the code is fine but needs lockdep annotation.
>> turning off the locking correctness validator.
>> CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted
>> 4.14.0-rc1-42251-gebb2c2437d80 #215
>> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
>> 01/01/2011
>> Workqueue: usb_hub_wq hub_event
>> Call Trace:
>> __dump_stack lib/dump_stack.c:16
>> dump_stack+0x292/0x395 lib/dump_stack.c:52
>> register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
>> __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
>> lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
>> flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
>> hdpvr_probe+0x233/0x20d0 drivers/media/usb/hdpvr/hdpvr-core.c:400
>> usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
>> really_probe drivers/base/dd.c:413
>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>> usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
>> generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
>> usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
>> really_probe drivers/base/dd.c:413
>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>> usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
>> hub_port_connect drivers/usb/core/hub.c:4903
>> hub_port_connect_change drivers/usb/core/hub.c:5009
>> port_event drivers/usb/core/hub.c:5115
>> hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
>> process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
>> worker_thread+0x221/0x1850 kernel/workqueue.c:2253
>> kthread+0x3a1/0x470 kernel/kthread.c:231
>> ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
>> hdpvr: probe of 1-1:8.217 failed with error -12
>
> ~arvind
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: usb/media/hdpvr: trying to register non-static key in hdpvr_probe
2017-09-22 11:46 ` Andrey Konovalov
@ 2017-09-22 13:09 ` Arvind Yadav
2017-09-22 13:18 ` Andrey Konovalov
0 siblings, 1 reply; 5+ messages in thread
From: Arvind Yadav @ 2017-09-22 13:09 UTC (permalink / raw)
To: Andrey Konovalov
Cc: Hans Verkuil, Mauro Carvalho Chehab, Laurent Pinchart,
linux-media, LKML, Dmitry Vyukov, Kostya Serebryany, syzkaller
Hi Andrey,
On Friday 22 September 2017 05:16 PM, Andrey Konovalov wrote:
> On Fri, Sep 22, 2017 at 9:41 AM, Arvind Yadav <arvind.yadav.cs@gmail.com> wrote:
>> Hi,
>>
>> I have a doubt. Why we are calling flush_work in hdpvr_probe for every
>> failure.
>> We are flushing work which is not defined yet.
>>
>> Here, hdpvr_register_videodev() is responsible for setup and register a
>> video device.
>> Also defining and initializing a worker. we are calling
>> hdpvr_register_videodev() at last.
>> No need to flash any work here.
>>
>> Please correct me, if I am wrong.
> Hi Arvind,
>
> I believe you're right, no need to call flush_work() before
> dev->worker is initialized.
>
> Could you send a fix?
>
> I'm able to reproduce the issue, so I can test your patches if needed.
I have send a one patch to you. which will resolve this error. But my
question is why
hdpvr_probe() is failing. We need to find out. Could please share more
information and logs.
~arvind
> Thanks!
>
>>
>> On Thursday 21 September 2017 09:09 PM, Andrey Konovalov wrote:
>>> Hi!
>>>
>>> I've got the following report while fuzzing the kernel with syzkaller.
>>>
>>> On commit ebb2c2437d8008d46796902ff390653822af6cc4 (Sep 18).
>>>
>>> INFO: trying to register non-static key.
>>> the code is fine but needs lockdep annotation.
>>> turning off the locking correctness validator.
>>> CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted
>>> 4.14.0-rc1-42251-gebb2c2437d80 #215
>>> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
>>> 01/01/2011
>>> Workqueue: usb_hub_wq hub_event
>>> Call Trace:
>>> __dump_stack lib/dump_stack.c:16
>>> dump_stack+0x292/0x395 lib/dump_stack.c:52
>>> register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
>>> __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
>>> lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
>>> flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
>>> hdpvr_probe+0x233/0x20d0 drivers/media/usb/hdpvr/hdpvr-core.c:400
>>> usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
>>> really_probe drivers/base/dd.c:413
>>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>>> usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
>>> generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
>>> usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
>>> really_probe drivers/base/dd.c:413
>>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>>> usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
>>> hub_port_connect drivers/usb/core/hub.c:4903
>>> hub_port_connect_change drivers/usb/core/hub.c:5009
>>> port_event drivers/usb/core/hub.c:5115
>>> hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
>>> process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
>>> worker_thread+0x221/0x1850 kernel/workqueue.c:2253
>>> kthread+0x3a1/0x470 kernel/kthread.c:231
>>> ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
>>> hdpvr: probe of 1-1:8.217 failed with error -12
>> ~arvind
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: usb/media/hdpvr: trying to register non-static key in hdpvr_probe
2017-09-22 13:09 ` Arvind Yadav
@ 2017-09-22 13:18 ` Andrey Konovalov
0 siblings, 0 replies; 5+ messages in thread
From: Andrey Konovalov @ 2017-09-22 13:18 UTC (permalink / raw)
To: Arvind Yadav
Cc: Hans Verkuil, Mauro Carvalho Chehab, Laurent Pinchart,
linux-media, LKML, Dmitry Vyukov, Kostya Serebryany, syzkaller
On Fri, Sep 22, 2017 at 3:09 PM, Arvind Yadav <arvind.yadav.cs@gmail.com> wrote:
> Hi Andrey,
>
>
> On Friday 22 September 2017 05:16 PM, Andrey Konovalov wrote:
>>
>> On Fri, Sep 22, 2017 at 9:41 AM, Arvind Yadav <arvind.yadav.cs@gmail.com>
>> wrote:
>>>
>>> Hi,
>>>
>>> I have a doubt. Why we are calling flush_work in hdpvr_probe for every
>>> failure.
>>> We are flushing work which is not defined yet.
>>>
>>> Here, hdpvr_register_videodev() is responsible for setup and register a
>>> video device.
>>> Also defining and initializing a worker. we are calling
>>> hdpvr_register_videodev() at last.
>>> No need to flash any work here.
>>>
>>> Please correct me, if I am wrong.
>>
>> Hi Arvind,
>>
>> I believe you're right, no need to call flush_work() before
>> dev->worker is initialized.
>>
>> Could you send a fix?
>>
>> I'm able to reproduce the issue, so I can test your patches if needed.
>
> I have send a one patch to you. which will resolve this error. But my
> question is why
> hdpvr_probe() is failing. We need to find out. Could please share more
> information and logs.
The patch helps, thanks!
hdpvr_probe() is failing, because I'm attaching a malicious USB device
that pretends to be an hdpvr device, but doesn't have a bulk-in
endpoint.
[ 27.722420] gadgetfs: bound to dummy_udc driver
[ 27.990245] usb 1-1: new full-speed USB device number 2 using dummy_hcd
[ 28.010242] gadgetfs: connected
[ 28.011732] gadgetfs: disconnected
[ 28.230142] gadgetfs: connected
[ 28.330313] usb 1-1: config 8 has an invalid interface number: 217
but max is 0
[ 28.331981] usb 1-1: config 8 has no interface number 0
[ 28.410315] usb 1-1: New USB device found, idVendor=2040, idProduct=4903
[ 28.411826] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=127
[ 28.413477] usb 1-1: SerialNumber: a
[ 28.440134] gadgetfs: configuration #8
[ 28.467705] hdpvr 1-1:8.217: Could not find bulk-in endpoint
[ 28.469024] hdpvr: probe of 1-1:8.217 failed with error -12
[ 29.446584] gadgetfs: disconnected
[ 29.449634] usb 1-1: USB disconnect, device number 2
>
> ~arvind
>
>> Thanks!
>>
>>>
>>> On Thursday 21 September 2017 09:09 PM, Andrey Konovalov wrote:
>>>>
>>>> Hi!
>>>>
>>>> I've got the following report while fuzzing the kernel with syzkaller.
>>>>
>>>> On commit ebb2c2437d8008d46796902ff390653822af6cc4 (Sep 18).
>>>>
>>>> INFO: trying to register non-static key.
>>>> the code is fine but needs lockdep annotation.
>>>> turning off the locking correctness validator.
>>>> CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted
>>>> 4.14.0-rc1-42251-gebb2c2437d80 #215
>>>> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
>>>> 01/01/2011
>>>> Workqueue: usb_hub_wq hub_event
>>>> Call Trace:
>>>> __dump_stack lib/dump_stack.c:16
>>>> dump_stack+0x292/0x395 lib/dump_stack.c:52
>>>> register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769
>>>> __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385
>>>> lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002
>>>> flush_work+0xf0/0x8c0 kernel/workqueue.c:2886
>>>> hdpvr_probe+0x233/0x20d0 drivers/media/usb/hdpvr/hdpvr-core.c:400
>>>> usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
>>>> really_probe drivers/base/dd.c:413
>>>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>>>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>>>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>>>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>>>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>>>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>>>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>>>> usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
>>>> generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
>>>> usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
>>>> really_probe drivers/base/dd.c:413
>>>> driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
>>>> __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
>>>> bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
>>>> __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
>>>> device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
>>>> bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
>>>> device_add+0xd0b/0x1660 drivers/base/core.c:1835
>>>> usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
>>>> hub_port_connect drivers/usb/core/hub.c:4903
>>>> hub_port_connect_change drivers/usb/core/hub.c:5009
>>>> port_event drivers/usb/core/hub.c:5115
>>>> hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
>>>> process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
>>>> worker_thread+0x221/0x1850 kernel/workqueue.c:2253
>>>> kthread+0x3a1/0x470 kernel/kthread.c:231
>>>> ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
>>>> hdpvr: probe of 1-1:8.217 failed with error -12
>>>
>>> ~arvind
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-09-22 13:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-21 15:39 usb/media/hdpvr: trying to register non-static key in hdpvr_probe Andrey Konovalov
2017-09-22 7:41 ` Arvind Yadav
2017-09-22 11:46 ` Andrey Konovalov
2017-09-22 13:09 ` Arvind Yadav
2017-09-22 13:18 ` Andrey Konovalov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome