Re: [PATCH v2 2/2] arm64: dts: qcom: sdm845-db845c: Use pad fn instead of defining own

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 12/22/25 3:01 PM, David Heidelberg wrote:
> On 18/12/2025 13:25, Konrad Dybcio wrote:
>> On 12/17/25 12:39 PM, David Heidelberg via B4 Relay wrote:
>>> From: David Heidelberg <david@ixit.cz>
>>>
>>> Instead of defining own pad function for master clock, pick one offered
>>> by sdm845 device-tree include.
>>
>> I'm a little bitter about the wording - the pad function here is "cam_mclk",
>> whereas what you're doing is inheriting a common pinmux/pincfg node that
>> refers to that function
>>
>> [...]
>>
>>> -        mclk0-pins {
>>> -            pins = "gpio13";
>>> -            function = "cam_mclk";
>>> -
>>> -            drive-strength = <16>;
>>
>> This patch changes the drive-strength (16 -> 2 mA)
>>
>> FWIW it's 2 on reference designs and Sony boards, check your
>> downstream kernel
> 
> I don't have any. I'm fine with this patch not getting applied, but I'll CC Robert who added the support, maybe he can verify.

FWIW this can be verified at runtime as well (running downstream) with

cat /sys/kernel/debug/gpio

Konrad