From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
To: Alexey Charkov <alchark@gmail.com>, Chaoyi Chen <kernel@airkyi.com>
Cc: Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Quentin Schulz <quentin.schulz@cherry.de>,
Kever Yang <kever.yang@rock-chips.com>,
Jonas Karlman <jonas@kwiboo.se>, John Clark <inindev@gmail.com>,
FUKAUMI Naoki <naoki@radxa.com>,
Jimmy Hon <honyuenkwun@gmail.com>,
Dragan Simic <dsimic@manjaro.org>,
Michael Riesch <michael.riesch@collabora.com>,
Peter Robinson <pbrobinson@gmail.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Andy Yan <andy.yan@rock-chips.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] arm64: dts: rockchip: Add rk3576 evb2 board
Date: Thu, 8 Jan 2026 16:38:06 +0800 [thread overview]
Message-ID: <6f55c325-6b2a-4fe9-a487-5f1ae7969d9d@rock-chips.com> (raw)
In-Reply-To: <CABjd4YxwD_q_FrEuPw_GY+vG6700Vd_weWqdcFn2C3V0fqpO-Q@mail.gmail.com>
On 1/8/2026 4:11 PM, Alexey Charkov wrote:
> On Thu, Jan 8, 2026 at 12:02 PM Chaoyi Chen <kernel@airkyi.com> wrote:
>>
>> On 1/8/2026 3:42 PM, Chaoyi Chen wrote:
>>> Hello Alexey, Andrew,
>>>
>>> On 1/8/2026 2:53 PM, Alexey Charkov wrote:
>>>> On Wed, Jan 7, 2026 at 10:18 PM Andrew Lunn <andrew@lunn.ch> wrote:
>>>>>
>>>>>> +&gmac0 {
>>>>>> + clock_in_out = "output";
>>>>>> + phy-mode = "rgmii-rxid";
>>>>>
>>>>> rgmii-rxid is odd. Does the PCB really have an extra long TX clock
>>>>> line, but a short RX clock line?
>>>>>
>>>>> Try changing this to rgmii-id, and drop the tx_delay property.
>>>>
>>>> Actually it would be great if Rockchip could clarify the delay
>>>> duration introduced by a single delay element in GMAC-IOMUX delay
>>>> lines, which are controlled in the GMAC driver by the {tx,rx}_delay
>>>> properties. Maybe we could then switch to using
>>>> {tx,rx}_internal_delay_ps for fine-tuning the delays on the GMAC side
>>>> as envisaged in DT bindings [1], and use phy-mode = "rgmii-id"
>>>> throughout. Chaoyi, any chance you could ask around in your hardware
>>>> team?
>>>>
>>>> Currently though removing the delays at GMAC side altogether causes
>>>> unstable link operation - see [2] for example.
>>>>
>>>> [1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/net/ethernet-controller.yaml#L342-L347
>>>> [2] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commit/372f3e9ae62cc62cdf2543391ea57be6bb548a0c
>>>
>>> Sorry, this problem has been discussed many times before. It's because
>>> the gmac on the Rockchip platform currently relies on setting the
>>> corresponding delay via phy-mode [3].
>>>
>>> [3] https://lore.kernel.org/all/mqoyjn7mnq6tmt6n6oev4wa3herjaxlupml2fmcampwiajvj4a@r5zs4d3jdm5p/
>>>
>>> The delay introduced by the delay line is not absolute. In reality,
>>> it depends on factors such as the chip's design and process technology.
>>>
>>> And for RK3576, you can assume that:
>>>
>>> time(ns) = 0.0579 * delay_line_count + 0.105
>>>
>>> For example, tx_delay = <0x20> means:
>>>
>>> time = 0.0579 * 0x20 + 0.105 ns = 1.9578 ns
>>>
>>> And I believe {tx,rx}_internal_delay_ps is indeed a good idea.
>>> I'll try to add them in v3. Thanks.
>>>
>>
>> I've also see some dt that use {tx,rx}_internal_delay_ps inside the PHY,
>> and compared to doing it in the MAC, which one is the better choice?
>
> Your PHY defaults to 1950ps in rgmii-id [1], so adding anything on top
> of that on GMAC side would land you with a longer total TX delay than
> you currently get according to the coefficients you've just posted
> (1784.1ps). I would say go for "tx-internal-delay-ps = <1800>" on the
> PHY side for the closest match.
>
> [1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/net/motorcomm%2Cyt8xxx.yaml#L36
Ah, I thought it was something like this:
&gmac0 {
phy-mode = "rgmii";
tx-internal-delay-ps = <1784>;
};
But what you actually said was this:
&mdio1 {
rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
tx-internal-delay-ps = <1784>;
};
};
These two `tx-internal-delay-ps` things shouldn't be the same, right?
--
Best,
Chaoyi
next prev parent reply other threads:[~2026-01-08 8:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-07 7:03 [PATCH v2 0/2] " Chaoyi Chen
2026-01-07 7:03 ` [PATCH v2 1/2] dt-bindings: arm: " Chaoyi Chen
2026-01-07 7:03 ` [PATCH v2 2/2] arm64: dts: " Chaoyi Chen
2026-01-07 7:56 ` Alexey Charkov
2026-01-07 8:21 ` Heiko Stübner
2026-01-07 9:57 ` Chaoyi Chen
2026-01-07 10:04 ` Chaoyi Chen
2026-01-07 14:54 ` Heiko Stübner
2026-01-07 14:56 ` Heiko Stübner
2026-01-07 9:50 ` Chaoyi Chen
2026-01-07 15:46 ` Quentin Schulz
2026-01-08 6:27 ` Chaoyi Chen
2026-01-08 10:07 ` Quentin Schulz
2026-01-08 10:41 ` Chaoyi Chen
2026-01-08 10:51 ` Quentin Schulz
2026-01-07 18:17 ` Andrew Lunn
2026-01-08 6:53 ` Alexey Charkov
2026-01-08 7:42 ` Chaoyi Chen
2026-01-08 8:01 ` Chaoyi Chen
2026-01-08 8:11 ` Alexey Charkov
2026-01-08 8:38 ` Chaoyi Chen [this message]
2026-01-08 8:49 ` Alexey Charkov
2026-01-08 9:02 ` Chaoyi Chen
2026-01-08 13:53 ` Andrew Lunn
2026-01-08 6:50 ` Andy Yan
2026-01-08 8:04 ` [PATCH " Chaoyi Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6f55c325-6b2a-4fe9-a487-5f1ae7969d9d@rock-chips.com \
--to=chaoyi.chen@rock-chips.com \
--cc=alchark@gmail.com \
--cc=andrew@lunn.ch \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dsimic@manjaro.org \
--cc=heiko@sntech.de \
--cc=honyuenkwun@gmail.com \
--cc=inindev@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@airkyi.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.riesch@collabora.com \
--cc=naoki@radxa.com \
--cc=pbrobinson@gmail.com \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=shawn.lin@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®