* [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform
@ 2020-09-09 9:08 Ben Pai
2020-09-11 5:34 ` Joel Stanley
0 siblings, 1 reply; 3+ messages in thread
From: Ben Pai @ 2020-09-09 9:08 UTC (permalink / raw)
To: robh+dt, joel, andrew, devicetree, linux-arm-kernel,
linux-aspeed, linux-kernel
Cc: claire_ku, Ben Pai, Ben Pai
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 663 ++++++++++++++++++++
2 files changed, 664 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..92edb2e12823 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1381,6 +1381,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
+ aspeed-bmc-opp-mowgli.dtb \
aspeed-bmc-opp-nicole.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000000..11fd86980162
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Mowgli BMC";
+ compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 2)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 0)>;
+ };
+
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ front-fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power-button {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ front-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon-12v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>;
+ };
+
+ iio-hwmon-5v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>;
+ };
+
+ iio-hwmon-3v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 2>;
+ };
+
+ iio-hwmon-vdd {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 3>;
+ };
+
+ iio-hwmon-vcs {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>;
+ };
+
+ iio-hwmon-vdn {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ iio-hwmon-vio {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 9>;
+ };
+
+ iio-hwmon-vddra {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+ iio-hwmon-vddrb {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 13>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
+ };
+ flash@1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* CPU MFG CONN */
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* APSS */
+ /* CPLD */
+
+ /* PCA9516 (repeater) ->
+ * CLK Buffer 9FGS9092
+ * Power Supply 0
+ * Power Supply 1
+ * PCA 9552 LED
+ */
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps1";
+ reg = <0x69>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN & VIO : IR35221 */
+ /* CP0 VDDR : IR35221 */
+
+ ir35221@28 {
+ compatible = "infineon,ir35221";
+ reg = <0x28>;
+ };
+
+ ir35221@29 {
+ compatible = "infineon,ir35221";
+ reg = <0x29>;
+ };
+
+ ir35221@2d {
+ compatible = "infineon,ir35221";
+ reg = <0x2d>;
+ };
+
+};
+
+&i2c5 {
+ status = "disabled";
+};
+
+&i2c6 {
+ status = "disabled";
+};
+
+&i2c7 {
+ status = "disabled";
+};
+
+&i2c8 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ /* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+ status = "disabled";
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* CPLD */
+ /* TPM */
+ /* RTC RX8900CE */
+ /* TMP275A */
+ /* TMP275A */
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+};
+
+&i2c12 {
+ status = "disabled";
+};
+
+&i2c13 {
+ status = "disabled";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
+
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform
2020-09-09 9:08 [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform Ben Pai
@ 2020-09-11 5:34 ` Joel Stanley
2020-09-17 9:44 ` Ben_Pai
0 siblings, 1 reply; 3+ messages in thread
From: Joel Stanley @ 2020-09-11 5:34 UTC (permalink / raw)
To: Ben Pai
Cc: Rob Herring, Andrew Jeffery, devicetree, Linux ARM, linux-aspeed,
Linux Kernel Mailing List, claire_ku
On Wed, 9 Sep 2020 at 09:09, Ben Pai <ben_pai@wistron.com> wrote:
>
> The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an
> OpenPower Power9 server.
>
> Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
This looks good to me. I assume you have all the hardware correctly described.
I notice you don't have any gpio-line-names. If you're using recent
openbmc you will need those descriptions, but I will leave that to
you.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cheers,
Joel
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 663 ++++++++++++++++++++
> 2 files changed, 664 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..92edb2e12823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1381,6 +1381,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-microsoft-olympus.dtb \
> aspeed-bmc-opp-lanyang.dtb \
> aspeed-bmc-opp-mihawk.dtb \
> + aspeed-bmc-opp-mowgli.dtb \
> aspeed-bmc-opp-nicole.dtb \
> aspeed-bmc-opp-palmetto.dtb \
> aspeed-bmc-opp-romulus.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
> new file mode 100644
> index 000000000000..11fd86980162
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
> @@ -0,0 +1,663 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Mowgli BMC";
> + compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
> +
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash_memory: region@98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + air-water {
> + label = "air-water";
> + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 6)>;
> + };
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(J, 2)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 2)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 0)>;
> + };
> +
> + id-button {
> + label = "id-button";
> + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
> + linux,code = <11>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
> + linux,code = <12>;
> + };
> +
> + fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
> + linux,code = <13>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + front-fault {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + power-button {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + front-id {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + fan0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan4 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
> + };
> +
> + iio-hwmon-12v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>;
> + };
> +
> + iio-hwmon-5v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>;
> + };
> +
> + iio-hwmon-3v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 2>;
> + };
> +
> + iio-hwmon-vdd {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 3>;
> + };
> +
> + iio-hwmon-vcs {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 5>;
> + };
> +
> + iio-hwmon-vdn {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 7>;
> + };
> +
> + iio-hwmon-vio {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 9>;
> + };
> +
> + iio-hwmon-vddra {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 11>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 12>;
> + };
> +
> + iio-hwmon-vddrb {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 13>;
> + };
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + fan@6 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +
> + fan@8 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08>;
> + };
> +
> + fan@9 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x09>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + label = "bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "obmc-ubi";
> + };
> + };
> + };
> + flash@1 {
> + status = "okay";
> + label = "alt-bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "alt-u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "alt-u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "alt-obmc-ubi";
> + };
> + };
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + /* APSS */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> + <&syscon ASPEED_CLK_MAC1RCLK>;
> + clock-names = "MACCLK", "RCLK";
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +};
> +
> +&i2c1 {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* CPU MFG CONN */
> +
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* APSS */
> + /* CPLD */
> +
> + /* PCA9516 (repeater) ->
> + * CLK Buffer 9FGS9092
> + * Power Supply 0
> + * Power Supply 1
> + * PCA 9552 LED
> + */
> +
> + pca9552: pca9552@60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + power-supply@68 {
> + compatible = "ibm,cffps1";
> + reg = <0x68>;
> + };
> +
> + power-supply@69 {
> + compatible = "ibm,cffps1";
> + reg = <0x69>;
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN & VIO : IR35221 */
> + /* CP0 VDDR : IR35221 */
> +
> + ir35221@28 {
> + compatible = "infineon,ir35221";
> + reg = <0x28>;
> + };
> +
> + ir35221@29 {
> + compatible = "infineon,ir35221";
> + reg = <0x29>;
> + };
> +
> + ir35221@2d {
> + compatible = "infineon,ir35221";
> + reg = <0x2d>;
> + };
> +
> +};
> +
> +&i2c5 {
> + status = "disabled";
> +};
> +
> +&i2c6 {
> + status = "disabled";
> +};
> +
> +&i2c7 {
> + status = "disabled";
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + /* PCIe G3 x16 slot */
> +};
> +
> +&i2c10 {
> + status = "disabled";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + /* CPLD */
> + /* TPM */
> + /* RTC RX8900CE */
> + /* TMP275A */
> + /* TMP275A */
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> +};
> +
> +&i2c12 {
> + status = "disabled";
> +};
> +
> +&i2c13 {
> + status = "disabled";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&adc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default
> + &pinctrl_adc1_default
> + &pinctrl_adc2_default
> + &pinctrl_adc3_default
> + &pinctrl_adc4_default
> + &pinctrl_adc5_default
> + &pinctrl_adc6_default
> + &pinctrl_adc7_default
> + &pinctrl_adc8_default
> + &pinctrl_adc9_default
> + &pinctrl_adc10_default
> + &pinctrl_adc11_default
> + &pinctrl_adc12_default
> + &pinctrl_adc13_default
> + &pinctrl_adc14_default
> + &pinctrl_adc15_default>;
> +};
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +};
> +
> +&wdt2 {
> + aspeed,alt-boot;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +#include "ibm-power9-dual.dtsi"
> +
> --
> 2.17.1
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform
2020-09-11 5:34 ` Joel Stanley
@ 2020-09-17 9:44 ` Ben_Pai
0 siblings, 0 replies; 3+ messages in thread
From: Ben_Pai @ 2020-09-17 9:44 UTC (permalink / raw)
To: joel
Cc: robh+dt, andrew, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Claire_Ku
Thanks for your review
I will resubmit a new patch containing gpio-line-names later
Best Regards,
Ben
-----Original Message-----
From: Joel Stanley <joel@jms.id.au>
Sent: Friday, September 11, 2020 1:35 PM
To: Ben Pai/WHQ/Wistron <Ben_Pai@wistron.com>
Cc: Rob Herring <robh+dt@kernel.org>; Andrew Jeffery <andrew@aj.id.au>; devicetree <devicetree@vger.kernel.org>; Linux ARM <linux-arm-kernel@lists.infradead.org>; linux-aspeed <linux-aspeed@lists.ozlabs.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Claire Ku/WHQ/Wistron <Claire_Ku@wistron.com>
Subject: Re: [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform
On Wed, 9 Sep 2020 at 09:09, Ben Pai <ben_pai@wistron.com> wrote:
>
> The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an
> OpenPower Power9 server.
>
> Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
This looks good to me. I assume you have all the hardware correctly described.
I notice you don't have any gpio-line-names. If you're using recent openbmc you will need those descriptions, but I will leave that to you.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cheers,
Joel
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 663
> ++++++++++++++++++++
> 2 files changed, 664 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..92edb2e12823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1381,6 +1381,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-microsoft-olympus.dtb \
> aspeed-bmc-opp-lanyang.dtb \
> aspeed-bmc-opp-mihawk.dtb \
> + aspeed-bmc-opp-mowgli.dtb \
> aspeed-bmc-opp-nicole.dtb \
> aspeed-bmc-opp-palmetto.dtb \
> aspeed-bmc-opp-romulus.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
> new file mode 100644
> index 000000000000..11fd86980162
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
> @@ -0,0 +1,663 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h> #include
> +<dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Mowgli BMC";
> + compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
> +
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash_memory: region@98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + air-water {
> + label = "air-water";
> + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 6)>;
> + };
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(J, 2)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 2)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 0)>;
> + };
> +
> + id-button {
> + label = "id-button";
> + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
> + linux,code = <11>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
> + linux,code = <12>;
> + };
> +
> + fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
> + linux,code = <13>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + front-fault {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + power-button {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + front-id {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + fan0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan4 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
> + };
> +
> + iio-hwmon-12v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>;
> + };
> +
> + iio-hwmon-5v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>;
> + };
> +
> + iio-hwmon-3v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 2>;
> + };
> +
> + iio-hwmon-vdd {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 3>;
> + };
> +
> + iio-hwmon-vcs {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 5>;
> + };
> +
> + iio-hwmon-vdn {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 7>;
> + };
> +
> + iio-hwmon-vio {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 9>;
> + };
> +
> + iio-hwmon-vddra {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 11>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 12>;
> + };
> +
> + iio-hwmon-vddrb {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 13>;
> + };
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + fan@6 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +
> + fan@8 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08>;
> + };
> +
> + fan@9 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x09>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + label = "bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "obmc-ubi";
> + };
> + };
> + };
> + flash@1 {
> + status = "okay";
> + label = "alt-bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "alt-u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "alt-u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "alt-obmc-ubi";
> + };
> + };
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>; };
> +
> +&uart2 {
> + /* APSS */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; };
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> + <&syscon ASPEED_CLK_MAC1RCLK>;
> + clock-names = "MACCLK", "RCLK";
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +};
> +
> +&i2c1 {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* CPU MFG CONN */
> +
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* APSS */
> + /* CPLD */
> +
> + /* PCA9516 (repeater) ->
> + * CLK Buffer 9FGS9092
> + * Power Supply 0
> + * Power Supply 1
> + * PCA 9552 LED
> + */
> +
> + pca9552: pca9552@60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + power-supply@68 {
> + compatible = "ibm,cffps1";
> + reg = <0x68>;
> + };
> +
> + power-supply@69 {
> + compatible = "ibm,cffps1";
> + reg = <0x69>;
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN & VIO : IR35221 */
> + /* CP0 VDDR : IR35221 */
> +
> + ir35221@28 {
> + compatible = "infineon,ir35221";
> + reg = <0x28>;
> + };
> +
> + ir35221@29 {
> + compatible = "infineon,ir35221";
> + reg = <0x29>;
> + };
> +
> + ir35221@2d {
> + compatible = "infineon,ir35221";
> + reg = <0x2d>;
> + };
> +
> +};
> +
> +&i2c5 {
> + status = "disabled";
> +};
> +
> +&i2c6 {
> + status = "disabled";
> +};
> +
> +&i2c7 {
> + status = "disabled";
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + /* PCIe G3 x16 slot */
> +};
> +
> +&i2c10 {
> + status = "disabled";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + /* CPLD */
> + /* TPM */
> + /* RTC RX8900CE */
> + /* TMP275A */
> + /* TMP275A */
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> +};
> +
> +&i2c12 {
> + status = "disabled";
> +};
> +
> +&i2c13 {
> + status = "disabled";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>; };
> +
> +&adc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default
> + &pinctrl_adc1_default
> + &pinctrl_adc2_default
> + &pinctrl_adc3_default
> + &pinctrl_adc4_default
> + &pinctrl_adc5_default
> + &pinctrl_adc6_default
> + &pinctrl_adc7_default
> + &pinctrl_adc8_default
> + &pinctrl_adc9_default
> + &pinctrl_adc10_default
> + &pinctrl_adc11_default
> + &pinctrl_adc12_default
> + &pinctrl_adc13_default
> + &pinctrl_adc14_default
> + &pinctrl_adc15_default>; };
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>; };
> +
> +&wdt2 {
> + aspeed,alt-boot;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>; };
> +
> +#include "ibm-power9-dual.dtsi"
> +
> --
> 2.17.1
>
>
> ----------------------------------------------------------------------
> ----------------------------------------------------------------------
> ------------------- This email contains confidential or legally
> privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ----------------------------------------------------------------------
> ----------------------------------------------------------------------
> -------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-09-17 9:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-09 9:08 [PATCH v1] ARM: dts: aspeed: Add Mowgli BMC platform Ben Pai
2020-09-11 5:34 ` Joel Stanley
2020-09-17 9:44 ` Ben_Pai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®