* [PATCH v2 2/4] firmware: qcom: scm: allow QSEECOM on ASUS Vivobook X1P42100 variant
2026-02-11 20:37 [PATCH v2 0/4] arm64: qcom: x1-vivobook-s15: add X1P42100 variant, restructure dts files Jens Glathe via B4 Relay
2026-02-11 20:37 ` [PATCH v2 1/4] dt-bindings: arm: qcom: Add ASUS Vivobook X1P42100 variant Jens Glathe via B4 Relay
@ 2026-02-11 20:37 ` Jens Glathe via B4 Relay
2026-02-11 20:37 ` [PATCH v2 3/4] arm64: dts: qcom: x1-vivobook-s15: create a common dtsi for Hamoa and Purwa variants Jens Glathe via B4 Relay
2026-02-11 20:37 ` [PATCH v2 4/4] arm64: dts: qcom: x1-vivobook-s15: add Purwa-compatible device tree Jens Glathe via B4 Relay
3 siblings, 0 replies; 9+ messages in thread
From: Jens Glathe via B4 Relay @ 2026-02-11 20:37 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Maud Spierings,
Colin K. Williams, Jens Glathe, Dmitry Baryshkov
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Enables access to EFI variables on this machine.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
drivers/firmware/qcom/qcom_scm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 8fbc96693a55f53c508d1ddb2d7a9e62281d1544..2fe1632f06e908683ba2841d68f9d382f407a425 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -2290,6 +2290,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send);
*/
static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
{ .compatible = "asus,vivobook-s15" },
+ { .compatible = "asus,vivobook-s15-x1p4" },
{ .compatible = "asus,zenbook-a14-ux3407qa" },
{ .compatible = "asus,zenbook-a14-ux3407ra" },
{ .compatible = "dell,inspiron-14-plus-7441" },
--
2.51.0
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v2 3/4] arm64: dts: qcom: x1-vivobook-s15: create a common dtsi for Hamoa and Purwa variants
2026-02-11 20:37 [PATCH v2 0/4] arm64: qcom: x1-vivobook-s15: add X1P42100 variant, restructure dts files Jens Glathe via B4 Relay
2026-02-11 20:37 ` [PATCH v2 1/4] dt-bindings: arm: qcom: Add ASUS Vivobook X1P42100 variant Jens Glathe via B4 Relay
2026-02-11 20:37 ` [PATCH v2 2/4] firmware: qcom: scm: allow QSEECOM on " Jens Glathe via B4 Relay
@ 2026-02-11 20:37 ` Jens Glathe via B4 Relay
2026-02-12 10:02 ` Konrad Dybcio
2026-02-13 17:05 ` Dmitry Baryshkov
2026-02-11 20:37 ` [PATCH v2 4/4] arm64: dts: qcom: x1-vivobook-s15: add Purwa-compatible device tree Jens Glathe via B4 Relay
3 siblings, 2 replies; 9+ messages in thread
From: Jens Glathe via B4 Relay @ 2026-02-11 20:37 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Maud Spierings,
Colin K. Williams, Jens Glathe
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
The Asus VivoBook S15 S5507QA is sold with x1e-78-100 and x1p-42-100 SKUs.
Put the common part into one dtsi file to be included for model-specific dts.
Include the common part in the existing Vivobook S15 device tree.
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
...-vivobook-s15.dts => x1-asus-vivobook-s15.dtsi} | 28 -
.../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 1425 +-------------------
2 files changed, 40 insertions(+), 1413 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi
similarity index 97%
copy from arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
copy to arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi
index 17269eb0638acb81cef7112285372b5d306ed8c3..1ac64d64e675b557d86042c3c361239170cf3f97 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1-asus-vivobook-s15.dtsi
@@ -4,19 +4,14 @@
* Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
*/
-/dts-v1/;
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include "hamoa.dtsi"
#include "hamoa-pmics.dtsi"
/ {
- model = "ASUS Vivobook S 15";
- compatible = "asus,vivobook-s15", "qcom,x1e80100";
chassis-type = "laptop";
aliases {
@@ -632,10 +627,6 @@ &gpu {
status = "okay";
};
-&gpu_zap_shader {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
-};
-
&i2c0 {
clock-frequency = <400000>;
status = "okay";
@@ -833,11 +824,6 @@ retimer_ss1_con_sbu_out: endpoint {
};
};
-&iris {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn";
- status = "okay";
-};
-
&mdss {
status = "okay";
};
@@ -1027,20 +1013,6 @@ &qupv3_2 {
status = "okay";
};
-&remoteproc_adsp {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
- "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
-
- status = "okay";
-};
-
-&remoteproc_cdsp {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
- "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
-
- status = "okay";
-};
-
&smb2360_0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
dissimilarity index 96%
index 17269eb0638acb81cef7112285372b5d306ed8c3..ed6ca0be367cfec22b9fe21a1a3a93be65ed195a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -1,1385 +1,40 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-#include "hamoa.dtsi"
-#include "hamoa-pmics.dtsi"
-
-/ {
- model = "ASUS Vivobook S 15";
- compatible = "asus,vivobook-s15", "qcom,x1e80100";
- chassis-type = "laptop";
-
- aliases {
- serial1 = &uart14;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&hall_int_n_default>;
- pinctrl-names = "default";
-
- switch-lid {
- gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- wakeup-source;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- };
- };
-
- hdmi-bridge {
- compatible = "parade,ps185hdm";
-
- pinctrl-0 = <&hdmi_hpd_default>;
- pinctrl-names = "default";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- hdmi_bridge_dp_in: endpoint {
- remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- hdmi_bridge_tmds_out: endpoint {
- remote-endpoint = <&hdmi_con>;
- };
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con: endpoint {
- remote-endpoint = <&hdmi_bridge_tmds_out>;
- };
- };
- };
-
- pmic-glink {
- compatible = "qcom,x1e80100-pmic-glink",
- "qcom,sm8550-pmic-glink",
- "qcom,pmic-glink";
- orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
- <&tlmm 123 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Left-side port, closer to the screen */
- connector@0 {
- compatible = "usb-c-connector";
- reg = <0>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss0_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss0_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&retimer_ss0_ss_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- pmic_glink_ss0_con_sbu_in: endpoint {
- remote-endpoint = <&retimer_ss0_con_sbu_out>;
- };
- };
- };
- };
-
- /* Left-side port, farther from the screen */
- connector@1 {
- compatible = "usb-c-connector";
- reg = <1>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss1_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss1_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&retimer_ss1_ss_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- pmic_glink_ss1_con_sbu_in: endpoint {
- remote-endpoint = <&retimer_ss1_con_sbu_out>;
- };
- };
- };
- };
- };
-
- reserved-memory {
- linux,cma {
- compatible = "shared-dma-pool";
- size = <0x0 0x8000000>;
- reusable;
- linux,cma-default;
- };
- };
-
- vreg_edp_3p3: regulator-edp-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_EDP_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&edp_reg_en>;
- pinctrl-names = "default";
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- vreg_nvme: regulator-nvme {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_NVME_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&nvme_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_1P15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
-
- gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_1P8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_1p8_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR0_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb0_3p3_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_1P15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
-
- gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_1P8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_RTMR1_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vph_pwr: regulator-vph-pwr {
- compatible = "regulator-fixed";
-
- regulator-name = "vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- /*
- * TODO: These two regulators are actually part of the removable M.2
- * card and not the CRD mainboard. Need to describe this differently.
- * Functionally it works correctly, because all we need to do is to
- * turn on the actual 3.3V supply above.
- */
- vreg_wcn_0p95: regulator-wcn-0p95 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_0P95";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
-
- vin-supply = <&vreg_wcn_3p3>;
- };
-
- vreg_wcn_1p9: regulator-wcn-1p9 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_1P9";
- regulator-min-microvolt = <1900000>;
- regulator-max-microvolt = <1900000>;
-
- vin-supply = <&vreg_wcn_3p3>;
- };
-
- vreg_wcn_3p3: regulator-wcn-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_WCN_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&wcn_sw_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- wcn7850-pmu {
- compatible = "qcom,wcn7850-pmu";
-
- vdd-supply = <&vreg_wcn_0p95>;
- vddio-supply = <&vreg_l15b_1p8>;
- vddaon-supply = <&vreg_wcn_0p95>;
- vdddig-supply = <&vreg_wcn_0p95>;
- vddrfa1p2-supply = <&vreg_wcn_1p9>;
- vddrfa1p8-supply = <&vreg_wcn_1p9>;
-
- wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
- bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>;
- pinctrl-names = "default";
-
- regulators {
- vreg_pmu_rfa_cmn: ldo0 {
- regulator-name = "vreg_pmu_rfa_cmn";
- };
-
- vreg_pmu_aon_0p59: ldo1 {
- regulator-name = "vreg_pmu_aon_0p59";
- };
-
- vreg_pmu_wlcx_0p8: ldo2 {
- regulator-name = "vreg_pmu_wlcx_0p8";
- };
-
- vreg_pmu_wlmx_0p85: ldo3 {
- regulator-name = "vreg_pmu_wlmx_0p85";
- };
-
- vreg_pmu_btcmx_0p85: ldo4 {
- regulator-name = "vreg_pmu_btcmx_0p85";
- };
-
- vreg_pmu_rfa_0p8: ldo5 {
- regulator-name = "vreg_pmu_rfa_0p8";
- };
-
- vreg_pmu_rfa_1p2: ldo6 {
- regulator-name = "vreg_pmu_rfa_1p2";
- };
-
- vreg_pmu_rfa_1p8: ldo7 {
- regulator-name = "vreg_pmu_rfa_1p8";
- };
-
- vreg_pmu_pcie_0p9: ldo8 {
- regulator-name = "vreg_pmu_pcie_0p9";
- };
-
- vreg_pmu_pcie_1p8: ldo9 {
- regulator-name = "vreg_pmu_pcie_1p8";
- };
- };
- };
-};
-
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pm8550-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vdd-bob1-supply = <&vph_pwr>;
- vdd-bob2-supply = <&vph_pwr>;
- vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
- vdd-l2-l13-l14-supply = <&vreg_bob1>;
- vdd-l5-l16-supply = <&vreg_bob1>;
- vdd-l6-l7-supply = <&vreg_bob2>;
- vdd-l8-l9-supply = <&vreg_bob1>;
- vdd-l12-supply = <&vreg_s5j_1p2>;
- vdd-l15-supply = <&vreg_s4c_1p8>;
- vdd-l17-supply = <&vreg_bob2>;
-
- vreg_bob1: bob1 {
- regulator-name = "vreg_bob1";
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_bob2: bob2 {
- regulator-name = "vreg_bob2";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <3008000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2b_3p0: ldo2 {
- regulator-name = "vreg_l2b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4b_1p8: ldo4 {
- regulator-name = "vreg_l4b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l13b_3p0: ldo13 {
- regulator-name = "vreg_l13b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l14b_3p0: ldo14 {
- regulator-name = "vreg_l14b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l15b_1p8: ldo15 {
- regulator-name = "vreg_l15b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s4-supply = <&vph_pwr>;
-
- vreg_l3c_0p8: ldo3 {
- regulator-name = "vreg_l3c_0p8";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_s4c_1p8: smps4 {
- regulator-name = "vreg_s4c_1p8";
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-2 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "d";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s4c_1p8>;
- vdd-s1-supply = <&vph_pwr>;
-
- vreg_l1d_0p8: ldo1 {
- regulator-name = "vreg_l1d_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2d_0p9: ldo2 {
- regulator-name = "vreg_l2d_0p9";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3d_1p8: ldo3 {
- regulator-name = "vreg_l3d_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-3 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "e";
-
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
-
- vreg_l2e_0p8: ldo2 {
- regulator-name = "vreg_l2e_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3e_1p2: ldo3 {
- regulator-name = "vreg_l3e_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-4 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "f";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
- vdd-s1-supply = <&vph_pwr>;
-
- vreg_s1f_0p7: smps1 {
- regulator-name = "vreg_s1f_0p7";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-6 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "i";
-
- vdd-l1-supply = <&vreg_s4c_1p8>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
-
- vreg_l3i_0p8: ldo3 {
- regulator-name = "vreg_l3i_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-7 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "j";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s5-supply = <&vph_pwr>;
-
- vreg_s5j_1p2: smps5 {
- regulator-name = "vreg_s5j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1j_0p8: ldo1 {
- regulator-name = "vreg_l1j_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2j_1p2: ldo2 {
- regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1256000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3j_0p8: ldo3 {
- regulator-name = "vreg_l3j_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <920000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-};
-
-&gpu {
- status = "okay";
-};
-
-&gpu_zap_shader {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- touchpad@15 {
- compatible = "hid-over-i2c";
- reg = <0x15>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-0 = <&tpad_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-};
-
-&i2c3 {
- clock-frequency = <400000>;
- status = "okay";
-
- typec-mux@8 {
- compatible = "parade,ps8830";
- reg = <0x08>;
-
- clocks = <&rpmhcc RPMH_RF_CLK3>;
-
- vdd-supply = <&vreg_rtmr0_1p15>;
- vdd33-supply = <&vreg_rtmr0_3p3>;
- vdd33-cap-supply = <&vreg_rtmr0_3p3>;
- vddar-supply = <&vreg_rtmr0_1p15>;
- vddat-supply = <&vreg_rtmr0_1p15>;
- vddio-supply = <&vreg_rtmr0_1p8>;
-
- reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&rtmr0_default>;
- pinctrl-names = "default";
-
- orientation-switch;
- retimer-switch;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- retimer_ss0_ss_out: endpoint {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- retimer_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- retimer_ss0_con_sbu_out: endpoint {
- remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
- };
- };
- };
- };
-};
-
-&i2c5 {
- clock-frequency = <400000>;
- status = "okay";
-
- keyboard@3a {
- compatible = "hid-over-i2c";
- reg = <0x3a>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-0 = <&kybd_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-
- eusb5_repeater: redriver@43 {
- compatible = "nxp,ptn3222";
- reg = <0x43>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb5_reset_n>;
- pinctrl-names = "default";
- };
-
- eusb3_repeater: redriver@47 {
- compatible = "nxp,ptn3222";
- reg = <0x47>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb3_reset_n>;
- pinctrl-names = "default";
- };
-
- eusb6_repeater: redriver@4f {
- compatible = "nxp,ptn3222";
- reg = <0x4f>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb6_reset_n>;
- pinctrl-names = "default";
- };
-
- /* EC @ 0x76 */
-};
-
-&i2c7 {
- clock-frequency = <400000>;
- status = "okay";
-
- typec-mux@8 {
- compatible = "parade,ps8830";
- reg = <0x8>;
-
- clocks = <&rpmhcc RPMH_RF_CLK4>;
-
- vdd-supply = <&vreg_rtmr1_1p15>;
- vdd33-supply = <&vreg_rtmr1_3p3>;
- vdd33-cap-supply = <&vreg_rtmr1_3p3>;
- vddar-supply = <&vreg_rtmr1_1p15>;
- vddat-supply = <&vreg_rtmr1_1p15>;
- vddio-supply = <&vreg_rtmr1_1p8>;
-
- reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&rtmr1_default>;
- pinctrl-names = "default";
-
- retimer-switch;
- orientation-switch;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- retimer_ss1_ss_out: endpoint {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- retimer_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- retimer_ss1_con_sbu_out: endpoint {
- remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
- };
- };
- };
- };
-};
-
-&iris {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn";
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dp0 {
- status = "okay";
-};
-
-&mdss_dp0_out {
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp1 {
- status = "okay";
-};
-
-&mdss_dp1_out {
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp2 {
- status = "okay";
-};
-
-&mdss_dp2_out {
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp3 {
- /delete-property/ #sound-dai-cells;
-
- pinctrl-0 = <&edp0_hpd_default>;
- pinctrl-names = "default";
-
- status = "okay";
-
- aux-bus {
- panel {
- compatible = "samsung,atna56ac03", "samsung,atna33xc20";
- enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
- power-supply = <&vreg_edp_3p3>;
-
- pinctrl-0 = <&edp_bl_en>;
- pinctrl-names = "default";
-
- port {
- edp_panel_in: endpoint {
- remote-endpoint = <&mdss_dp3_out>;
- };
- };
- };
- };
-};
-
-&mdss_dp3_out {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
-};
-
-&mdss_dp3_phy {
- vdda-phy-supply = <&vreg_l3j_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pcie4 {
- pinctrl-0 = <&pcie4_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie4_phy {
- vdda-phy-supply = <&vreg_l3i_0p8>;
- vdda-pll-supply = <&vreg_l3e_1p2>;
-
- status = "okay";
-};
-
-&pcie4_port0 {
- reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
- wifi@0 {
- compatible = "pci17cb,1107";
- reg = <0x10000 0x0 0x0 0x0 0x0>;
-
- vddaon-supply = <&vreg_pmu_aon_0p59>;
- vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
- vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
- vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
- vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
- vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
- vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
- vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
- vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
- };
-};
-
-&pcie6a {
- vddpe-3v3-supply = <&vreg_nvme>;
-
- pinctrl-0 = <&pcie6a_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie6a_phy {
- vdda-phy-supply = <&vreg_l1d_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pcie6a_port0 {
- reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-};
-
-&pm8550_gpios {
- rtmr0_default: rtmr0-reset-n-active-state {
- pins = "gpio10";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-
- usb0_3p3_reg_en: usb0-3p3-reg-en-state {
- pins = "gpio11";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&pm8550ve_9_gpios {
- usb0_1p8_reg_en: usb0-1p8-reg-en-state {
- pins = "gpio8";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&pmc8380_3_gpios {
- edp_bl_en: edp-bl-en-state {
- pins = "gpio4";
- function = "normal";
- power-source = <1>; /* 1.8 V */
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
- bias-pull-down;
- input-disable;
- output-enable;
- };
-};
-
-&pmc8380_5_gpios {
- usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
- pins = "gpio8";
- function = "normal";
- power-source = <1>; /* 1.8V */
- bias-disable;
- input-disable;
- output-enable;
- };
-};
-
-&qupv3_0 {
- status = "okay";
-};
-
-&qupv3_1 {
- status = "okay";
-};
-
-&qupv3_2 {
- status = "okay";
-};
-
-&remoteproc_adsp {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
- "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
-
- status = "okay";
-};
-
-&remoteproc_cdsp {
- firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
- "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
-
- status = "okay";
-};
-
-&smb2360_0 {
- status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
- status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&tlmm {
- gpio-reserved-ranges = <34 2>, /* Unused */
- <44 4>, /* SPI (TPM) */
- <238 1>; /* UFS Reset */
-
- edp_reg_en: edp-reg-en-state {
- pins = "gpio70";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- eusb3_reset_n: eusb3-reset-n-state {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-low;
- };
-
- eusb5_reset_n: eusb5-reset-n-state {
- pins = "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-low;
- };
-
- eusb6_reset_n: eusb6-reset-n-state {
- pins = "gpio184";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-low;
- };
-
- hall_int_n_default: hall-int-n-state {
- pins = "gpio92";
- function = "gpio";
- bias-disable;
- };
-
- hdmi_hpd_default: hdmi-hpd-default-state {
- pins = "gpio126";
- function = "usb2_dp";
- bias-disable;
- };
-
- kybd_default: kybd-default-state {
- pins = "gpio67";
- function = "gpio";
- bias-disable;
- };
-
- nvme_reg_en: nvme-reg-en-state {
- pins = "gpio18";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- pcie4_default: pcie4-default-state {
- clkreq-n-pins {
- pins = "gpio147";
- function = "pcie4_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio146";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio148";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie6a_default: pcie6a-default-state {
- clkreq-n-pins {
- pins = "gpio153";
- function = "pcie6a_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio152";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio154";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- rtmr1_default: rtmr1-reset-n-active-state {
- pins = "gpio176";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tpad_default: tpad-default-state {
- pins = "gpio3";
- function = "gpio";
- bias-disable;
- };
-
- usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
- pins = "gpio188";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
- pins = "gpio175";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
- pins = "gpio186";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- wcn_bt_en: wcn-bt-en-state {
- pins = "gpio116";
- function = "gpio";
- drive-strength = <16>;
- bias-pull-down;
- };
-
- wcn_sw_en: wcn-sw-en-state {
- pins = "gpio214";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- wcn_wlan_en: wcn-wlan-en-state {
- pins = "gpio117";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-};
-
-&uart14 {
- status = "okay";
-
- bluetooth {
- compatible = "qcom,wcn7850-bt";
- max-speed = <3200000>;
-
- vddaon-supply = <&vreg_pmu_aon_0p59>;
- vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
- vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
- vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
- vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
- vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
- vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
- };
-};
-
-&usb_1_ss0_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_0_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
- vdda-phy-supply = <&vreg_l2j_1p2>;
- vdda-pll-supply = <&vreg_l1j_0p8>;
-
- status = "okay";
-};
-
-&usb_1_ss0 {
- status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&retimer_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_1_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
- vdda-phy-supply = <&vreg_l2j_1p2>;
- vdda-pll-supply = <&vreg_l2d_0p9>;
-
- status = "okay";
-};
-
-&usb_1_ss1 {
- status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&retimer_ss1_ss_in>;
-};
-
-&usb_1_ss2_qmpphy {
- vdda-phy-supply = <&vreg_l2j_1p2>;
- vdda-pll-supply = <&vreg_l2d_0p9>;
-
- /delete-property/ mode-switch;
- /delete-property/ orientation-switch;
-
- status = "okay";
-
- ports {
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /delete-node/ endpoint;
-
- usb_1_ss2_qmpphy_out_dp: endpoint@0 {
- reg = <0>;
-
- data-lanes = <3 2 1 0>;
- remote-endpoint = <&hdmi_bridge_dp_in>;
- };
-
- /* No USB3 lanes connected */
- };
- };
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb5_repeater>;
-
- status = "okay";
-};
-
-&usb_mp {
- status = "okay";
-};
-
-&usb_mp_hsphy0 {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb3_repeater>;
-
- status = "okay";
-};
-
-&usb_mp_hsphy1 {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb6_repeater>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy0 {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l3c_0p8>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy1 {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l3c_0p8>;
-
- status = "okay";
-};
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "hamoa.dtsi"
+#include "x1-asus-vivobook-s15.dtsi"
+
+/ {
+ model = "ASUS Vivobook S 15";
+ compatible = "asus,vivobook-s15", "qcom,x1e80100";
+ chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
+};
+
+&iris {
+ firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
+ "qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
+ "qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
--
2.51.0
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v2 4/4] arm64: dts: qcom: x1-vivobook-s15: add Purwa-compatible device tree
2026-02-11 20:37 [PATCH v2 0/4] arm64: qcom: x1-vivobook-s15: add X1P42100 variant, restructure dts files Jens Glathe via B4 Relay
` (2 preceding siblings ...)
2026-02-11 20:37 ` [PATCH v2 3/4] arm64: dts: qcom: x1-vivobook-s15: create a common dtsi for Hamoa and Purwa variants Jens Glathe via B4 Relay
@ 2026-02-11 20:37 ` Jens Glathe via B4 Relay
2026-02-12 10:03 ` Konrad Dybcio
3 siblings, 1 reply; 9+ messages in thread
From: Jens Glathe via B4 Relay @ 2026-02-11 20:37 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Maud Spierings,
Colin K. Williams, Jens Glathe
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
The ASUS Vivobook S15 (S5507) [1] is available with Hamoa and Purwa SoC.
Add the Purwa-based device tree.
[1]: https://www.asus.com/de/laptops/for-home/vivobook/asus-vivobook-s-15-s5507/techspec/
Tested-by: Colin K. Williams <colin@li-nk.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../boot/dts/qcom/x1p42100-asus-vivobook-s15.dts | 43 ++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f80b5d9cf1e80e4efcd70f14cef4e7d4a1ec48eb..baa7ec904b4878a41e6fd9c678025f28cb484cf3 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -380,6 +380,8 @@ x1e80100-microsoft-romulus15-el2-dtbs := x1e80100-microsoft-romulus15.dtb x1-el2
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-asus-vivobook-s15-el2-dtbs := x1p42100-asus-vivobook-s15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-vivobook-s15.dtb x1p42100-asus-vivobook-s15-el2.dtb
x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts
new file mode 100644
index 0000000000000000000000000000000000000000..a68c295200d1a2481481f9740c1c2db9e4a7afed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-vivobook-s15.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "purwa.dtsi"
+#include "x1-asus-vivobook-s15.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+ model = "ASUS Vivobook S 15 X1P-42-100";
+ compatible = "asus,vivobook-s15-x1p4", "qcom,x1p42100";
+ chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcdxkmsucpurwa.mbn";
+};
+
+&iris {
+ firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcvss8380.mbn";
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
+ "qcom/x1p42100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
+ "qcom/x1p42100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
--
2.51.0
^ permalink raw reply [flat|nested] 9+ messages in thread