mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] drm/panel-edp: Allow querying the detected panel via sysfs
@ 2022-01-25 21:54 Douglas Anderson
  2022-01-25 22:55 ` Javier Martinez Canillas
  0 siblings, 1 reply; 7+ messages in thread
From: Douglas Anderson @ 2022-01-25 21:54 UTC (permalink / raw)
  To: dri-devel
  Cc: jjsu, lschyi, robert.foss, Douglas Anderson, Daniel Vetter,
	David Airlie, Sam Ravnborg, Thierry Reding, linux-kernel

Recently we added generic "edp-panel"s probed by EDID. To support
panels in this way we look at the panel ID in the EDID and look up the
panel in a table that has power sequence timings. If we find a panel
that's not in the table we will still attempt to use it but we'll use
conservative timings. While it's likely that these conservative
timings will work for most nearly all panels, the performance of
turning the panel off and on suffers.

We'd like to be able to reliably detect the case that we're using the
hardcoded timings without relying on parsing dmesg. This allows us to
implement tests that ensure that no devices get shipped that are
relying on the conservative timings.

Let's add a new sysfs entry to panel devices. It will have one of:
* UNKNOWN - We tried to detect a panel but it wasn't in our table.
* HARDCODED - We're not using generic "edp-panel" probed by EDID.
* A panel name - This is the name of the panel from our table.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/gpu/drm/panel/panel-edp.c | 39 +++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 99ca1bd0091c..719c1bb6c45c 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -222,6 +222,8 @@ struct panel_edp {
 	struct gpio_desc *enable_gpio;
 	struct gpio_desc *hpd_gpio;
 
+	const struct edp_panel_entry *detected_panel;
+
 	struct edid *edid;
 
 	struct drm_display_mode override_mode;
@@ -666,7 +668,6 @@ static const struct edp_panel_entry *find_edp_panel(u32 panel_id);
 
 static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 {
-	const struct edp_panel_entry *edp_panel;
 	struct panel_desc *desc;
 	u32 panel_id;
 	char vend[4];
@@ -705,14 +706,14 @@ static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 	}
 	drm_edid_decode_panel_id(panel_id, vend, &product_id);
 
-	edp_panel = find_edp_panel(panel_id);
+	panel->detected_panel = find_edp_panel(panel_id);
 
 	/*
 	 * We're using non-optimized timings and want it really obvious that
 	 * someone needs to add an entry to the table, so we'll do a WARN_ON
 	 * splat.
 	 */
-	if (WARN_ON(!edp_panel)) {
+	if (WARN_ON(!panel->detected_panel)) {
 		dev_warn(dev,
 			 "Unknown panel %s %#06x, using conservative timings\n",
 			 vend, product_id);
@@ -734,12 +735,14 @@ static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 		 */
 		desc->delay.unprepare = 2000;
 		desc->delay.enable = 200;
+
+		panel->detected_panel = ERR_PTR(-EINVAL);
 	} else {
 		dev_info(dev, "Detected %s %s (%#06x)\n",
-			 vend, edp_panel->name, product_id);
+			 vend, panel->detected_panel->name, product_id);
 
 		/* Update the delay; everything else comes from EDID */
-		desc->delay = *edp_panel->delay;
+		desc->delay = *panel->detected_panel->delay;
 	}
 
 	ret = 0;
@@ -750,6 +753,28 @@ static int generic_edp_panel_probe(struct device *dev, struct panel_edp *panel)
 	return ret;
 }
 
+static ssize_t detected_panel_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct panel_edp *p = dev_get_drvdata(dev);
+
+	if (IS_ERR(p->detected_panel))
+		return sysfs_emit(buf, "UNKNOWN\n");
+	else if (!p->detected_panel)
+		return sysfs_emit(buf, "HARDCODED\n");
+	else
+		return sysfs_emit(buf, "%s\n", p->detected_panel->name);
+}
+
+static const DEVICE_ATTR_RO(detected_panel);
+
+static void edp_panel_remove_detected_panel(void *data)
+{
+	struct panel_edp *p = data;
+
+	device_remove_file(p->base.dev, &dev_attr_detected_panel);
+}
+
 static int panel_edp_probe(struct device *dev, const struct panel_desc *desc,
 			   struct drm_dp_aux *aux)
 {
@@ -849,6 +874,10 @@ static int panel_edp_probe(struct device *dev, const struct panel_desc *desc,
 
 	drm_panel_add(&panel->base);
 
+	err = device_create_file(dev, &dev_attr_detected_panel);
+	if (!err)
+		devm_add_action_or_reset(dev, edp_panel_remove_detected_panel, panel);
+
 	return 0;
 
 err_finished_pm_runtime:
-- 
2.35.0.rc0.227.g00780c9af4-goog


^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-02-01 17:23 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-25 21:54 [PATCH] drm/panel-edp: Allow querying the detected panel via sysfs Douglas Anderson
2022-01-25 22:55 ` Javier Martinez Canillas
2022-01-25 23:25   ` Doug Anderson
2022-01-26  8:25     ` Javier Martinez Canillas
2022-02-01 16:41       ` Doug Anderson
2022-02-01 17:02         ` Daniel Vetter
2022-02-01 17:22           ` Doug Anderson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®