mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sanchayan Maity <maitysanchayan@gmail.com>
To: Peter.Chen@freescale.com
Cc: stefan@agner.ch, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sanchayan Maity <maitysanchayan@gmail.com>
Subject: [PATCH 1/3] usb: chipidea: Add identification registers access APIs
Date: Fri, 19 Dec 2014 15:25:27 +0530	[thread overview]
Message-ID: <72124df17c0f40f8a7ae02faa9664b9d51743584.1418981438.git.maitysanchayan@gmail.com> (raw)
In-Reply-To: <cover.1418981438.git.maitysanchayan@gmail.com>
In-Reply-To: <cover.1418981438.git.maitysanchayan@gmail.com>

Using hw_write_id_reg and hw_read_id_reg to write and read
identification registers contents. This can be used to get
controller information, change some system configurations
and so on.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
 drivers/usb/chipidea/ci.h |   53 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index ea40626..94db636 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -29,6 +29,15 @@
 /******************************************************************************
  * REGISTERS
  *****************************************************************************/
+/* Identification Registers */
+#define ID_ID				0x0
+#define ID_HWGENERAL			0x4
+#define ID_HWHOST			0x8
+#define ID_HWDEVICE			0xc
+#define ID_HWTXBUF			0x10
+#define ID_HWRXBUF			0x14
+#define ID_SBUSCFG			0x90
+
 /* register indices */
 enum ci_hw_regs {
 	CAP_CAPLENGTH,
@@ -97,6 +106,18 @@ enum ci_role {
 	CI_ROLE_END,
 };
 
+enum CI_REVISION {
+	CI_REVISION_1X = 10,	/* Revision 1.x */
+	CI_REVISION_20 = 20, /* Revision 2.0 */
+	CI_REVISION_21, /* Revision 2.1 */
+	CI_REVISION_22, /* Revision 2.2 */
+	CI_REVISION_23, /* Revision 2.3 */
+	CI_REVISION_24, /* Revision 2.4 */
+	CI_REVISION_25, /* Revision 2.5 */
+	CI_REVISION_25_PLUS, /* Revision above than 2.5 */
+	CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
+};
+
 /**
  * struct ci_role_driver - host/gadget role driver
  * @start: start this role
@@ -168,6 +189,7 @@ struct hw_bank {
  * @b_sess_valid_event: indicates there is a vbus event, and handled
  * at ci_otg_work
  * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
+ * @rev: The revision number for controller
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -207,6 +229,7 @@ struct ci_hdrc {
 	bool				id_event;
 	bool				b_sess_valid_event;
 	bool				imx28_write_fix;
+	enum CI_REVISION		rev;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
@@ -244,6 +267,36 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 }
 
 /**
+ * hw_read_id_reg: reads from a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
+{
+	return ioread32(ci->hw_bank.abs + offset) & mask;
+}
+
+/**
+ * hw_write_id_reg: writes to a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
+			| (data & mask);
+
+	iowrite32(data, ci->hw_bank.abs + offset);
+}
+
+/**
  * hw_read: reads from a hw register
  * @ci: the controller
  * @reg:  register index
-- 
1.7.9.5


  reply	other threads:[~2014-12-19  9:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-19  9:55 [PATCH 0/3] usb: chipidea: add one errata for revision 2.40a Sanchayan Maity
2014-12-19  9:55 ` Sanchayan Maity [this message]
2014-12-24 16:00   ` [PATCH 1/3] usb: chipidea: Add identification registers access APIs Stefan Agner
2014-12-24 16:15     ` Sanchayan Maity
2014-12-24 16:41       ` Stefan Agner
2014-12-25  2:13       ` Peter Chen
2014-12-25  3:33         ` Sanchayan Maity
2014-12-25  2:03     ` Peter Chen
2014-12-19  9:55 ` [PATCH 2/3] usb: chipidea: Add chipidea revision information Sanchayan Maity
2014-12-24 16:22   ` Stefan Agner
2014-12-25  2:30     ` Peter Chen
2014-12-19  9:55 ` [PATCH 3/3] usb: chipidea: Add errata for revision 2.40a Sanchayan Maity
2014-12-22  1:18 ` [PATCH 0/3] usb: chipidea: add one " Peter Chen
2014-12-22 13:09   ` Sanchayan Maity
2014-12-23  0:09     ` Peter Chen
2014-12-23  4:11       ` Sanchayan Maity
2014-12-24  7:50       ` Sanchayan Maity
2014-12-24  9:00         ` Peter Chen
2014-12-24  9:20           ` Sanchayan Maity
2014-12-24 15:42   ` Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=72124df17c0f40f8a7ae02faa9664b9d51743584.1418981438.git.maitysanchayan@gmail.com \
    --to=maitysanchayan@gmail.com \
    --cc=Peter.Chen@freescale.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®