Re: [PATCH net 1/3] r8152: fix flow control issue of RTL8156A

[Andrew Lunn <andrew@lunn.ch>]

On Wed, Apr 26, 2023 at 08:28:03PM +0800, Hayes Wang wrote:
> The feature of flow control becomes abnormal, if the device sends a
> pause frame and the tx/rx is disabled before sending a release frame. It
> causes the lost of packets.
> 
> Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the
> tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow
> control patch and timer. Then, the hardware could clear the state and
> the flow control becomes normal after enabling tx/rx.
> 
> Fixes: 195aae321c82 ("r8152: support new chips")
> Signed-off-by: Hayes Wang <hayeswang@realtek.com>
> ---
>  drivers/net/usb/r8152.c | 56 ++++++++++++++++++++++++++---------------
>  1 file changed, 36 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 0fc4b959edc1..08d1786135f2 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -5986,6 +5986,25 @@ static void rtl8153_disable(struct r8152 *tp)
>  	r8153_aldps_en(tp, true);
>  }
>  
> +static inline u32 fc_pause_on_auto(struct r8152 *tp)
> +{
> +	return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
> +}

No inline functions in .c files. Let the compiler decide. I see you
are just moving functions around, they were already inline, but now is
a good time to fix this.

  Andrew