Re: [PATCH v4 1/2] dt-bindings: power: reset: qcom-pon: update "reg" property details

[Anjelique Melendez <quic_amelende@quicinc.com>]

On 9/8/2022 7:55 AM, Krzysztof Kozlowski wrote:
> On 19/08/2022 22:26, Anjelique Melendez wrote:
>>
>> Hi Krzysztof,
>> First I would like to apologize for my lack of response to this patch series
>> over these past few weeks. I have been out of office.
>>
>> On 7/26/2022 3:25 AM, Krzysztof Kozlowski wrote:
>>> On 25/07/2022 21:13, Anjelique Melendez wrote:
>>>> From: David Collins <quic_collinsd@quicinc.com>
>>>>
>>>> Update the description of "reg" property to add the PON_PBS base
>>>> address along with PON_HLOS base address.  Also add "reg-names"
>>>> property constraints.
>>>>
>>>> Signed-off-by: David Collins <quic_collinsd@quicinc.com>
>>>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
>>>> ---
>>>>  Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++---
>>>>  1 file changed, 46 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
>>>> index 353f155d..d7b6b875 100644
>>>> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
>>>> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
>>>> @@ -15,18 +15,27 @@ description: |
>>>>  
>>>>    This DT node has pwrkey and resin as sub nodes.
>>>>  
>>>> -allOf:
>>>> -  - $ref: reboot-mode.yaml#
>>>> -
>>>>  properties:
>>>>    compatible:
>>>>      enum:
>>>>        - qcom,pm8916-pon
>>>>        - qcom,pms405-pon
>>>>        - qcom,pm8998-pon
>>>> +      - qcom,pmk8350-pon
>>>>  
>>>>    reg:
>>>> -    maxItems: 1
>>>> +    description: |
>>>> +      Specifies the SPMI base address for the PON (power-on) peripheral.  For
>>>> +      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
>>>> +      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
>>>> +      peripherals.  In that case, the PON_PBS address needs to be specified to
>>>> +      facilitate software debouncing on some PMIC.
>>>> +    minItems: 1
>>>> +    maxItems: 2
>>>> +
>>>> +  reg-names:
>>>> +    minItems: 1
>>>> +    maxItems: 2
>>>>  
>>>>    pwrkey:
>>>>      type: object
>>>> @@ -42,6 +51,39 @@ required:
>>>>  
>>>>  unevaluatedProperties: false
>>>>  
>>>> +allOf:
>>>> +  - $ref: reboot-mode.yaml#
>>>> +  - if:
>>>> +      properties:
>>>> +        compatible:
>>>> +          contains:
>>>> +            enum:
>>>> +              - qcom,pm8916-pon
>>>> +              - qcom,pms405-pon
>>>> +              - qcom,pm8998-pon
>>>> +    then:
>>>> +      properties:
>>>> +        reg:
>>>> +          maxItems: 1
>>>> +        reg-names:
>>>> +          items:
>>>> +            - const: pon
>>>
>>> All your previous patches were actually missing (in commit msg, in the
>>> code) that piece of information which you add here. You now add
>>> reg-names with "pon" for older devices. I assumed previous that it is
>>> somehow needed, so I gave you the hints how it should be coded. But I
>>> don't understand - why are you doing it
>>>
>>> This should be explained in commit msg. To me it is not needed at all...
>>> unless you want to mark that first address space is entirely different
>>> for other devices?
>> Adding reg-names "pon" for older devices is simply to provide clarification
>> about what the register relates to. Similar to reg-names "hlos" and "pbs"
>> for gen3 children devices, reg-names is completely optional and is not
>> consumed by any driver.
> 
> OK, can be. Include it in the commit msg, please.

ACK

> 
> 
> Best regards,
> Krzysztof