From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Praveenkumar I <quic_ipkumar@quicinc.com>,
agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, amitk@kernel.org,
thara.gopinath@gmail.com, rafael@kernel.org,
daniel.lezcano@linaro.org, rui.zhang@intel.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: quic_varada@quicinc.com
Subject: Re: [PATCH 4/6] arm64: dts: qcom: ipq5332: Add tsens node
Date: Mon, 10 Jul 2023 14:21:01 +0300 [thread overview]
Message-ID: <72f053a5-2754-409a-d174-d05bba3a3f39@linaro.org> (raw)
In-Reply-To: <20230710103735.1375847-5-quic_ipkumar@quicinc.com>
On 10/07/2023 13:37, Praveenkumar I wrote:
> IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense
> node with nvmem cells for calibration data.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 113 ++++++++++++++++++++++++++
> 1 file changed, 113 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db44624..a1e3527178c0 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -150,6 +150,91 @@ qfprom: efuse@a4000 {
> reg = <0x000a4000 0x721>;
> #address-cells = <1>;
> #size-cells = <1>;
> +
> + tsens_mode: mode@3e1 {
> + reg = <0x3e1 0x1>;
> + bits = <0 3>;
> + };
> +
> + tsens_base0: base0@3e1 {
> + reg = <0x3e1 0x2>;
> + bits = <3 10>;
> + };
> +
> + tsens_base1: base1@3e2 {
> + reg = <0x3e2 0x2>;
> + bits = <5 10>;
> + };
> +
> + s0_offset: s0_offset@3e4 {
> + reg = <0x3e4 0x1>;
> + bits = <0 4>;
> + };
> +
> + s3_offset: s3_offset@3e5 {
> + reg = <0x3e5 0x1>;
> + bits = <4 4>;
> + };
> +
> + s4_offset: s4_offset@3e6 {
> + reg = <0x3e6 0x1>;
> + bits = <0 4>;
> + };
> +
> + s5_offset: s5_offset@3e6 {
> + reg = <0x3e6 0x1>;
> + bits = <4 4>;
> + };
> +
> + s6_offset: s6_offset@3e8 {
> + reg = <0x3e8 0x1>;
> + bits = <0 4>;
> + };
> +
> + s7_offset: s7_offset@3e8 {
> + reg = <0x3e8 0x1>;
> + bits = <4 4>;
> + };
> +
> + s8_offset: s8_offset@3a4 {
> + reg = <0x3a4 0x1>;
> + bits = <0 4>;
> + };
> +
> + s9_offset: s9_offset@3a4 {
> + reg = <0x3a4 0x1>;
> + bits = <4 4>;
> + };
> +
> + s10_offset: s10_offset@3a5 {
> + reg = <0x3a5 0x1>;
> + bits = <0 4>;
> + };
> +
> + s11_offset: s11_offset@3a5 {
> + reg = <0x3a5 0x1>;
> + bits = <4 4>;
> + };
> +
> + s12_offset: s12_offset@3a6 {
> + reg = <0x3a6 0x1>;
> + bits = <0 4>;
> + };
> +
> + s13_offset: s13_offset@3a6 {
> + reg = <0x3a6 0x1>;
> + bits = <4 4>;
> + };
> +
> + s14_offset: s14_offset@3ad {
> + reg = <0x3ad 0x2>;
> + bits = <7 4>;
> + };
> +
> + s15_offset: s0_offset@3ae {
> + reg = <0x3ae 0x1>;
> + bits = <3 4>;
> + };
> };
>
> rng: rng@e3000 {
> @@ -159,6 +244,34 @@ rng: rng@e3000 {
> clock-names = "core";
> };
>
> + tsens: thermal-sensor@4a9000 {
> + compatible = "qcom,ipq5332-tsens";
> + reg = <0x4a9000 0x1000>,
> + <0x4a8000 0x1000>;
> + nvmem-cells = <&tsens_mode>, <&tsens_base0>,
> + <&tsens_base1>, <&s0_offset>,
Please align vertically.
> + <&s3_offset>, <&s4_offset>,
> + <&s5_offset>, <&s6_offset>,
> + <&s7_offset>, <&s8_offset>,
> + <&s9_offset>, <&s10_offset>,
> + <&s11_offset>, <&s12_offset>,
> + <&s13_offset>, <&s14_offset>,
> + <&s15_offset>;
> + nvmem-cell-names = "mode", "base0",
> + "base1", "s0_offset",
And here.
> + "s3_offset", "s4_offset",
> + "s5_offset", "s6_offset",
> + "s7_offset", "s8_offset",
> + "s9_offset", "s10_offset",
> + "s11_offset", "s12_offset",
> + "s13_offset", "s14_offset",
> + "s15_offset";
> + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "combined";
> + #qcom,sensors = <16>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> tlmm: pinctrl@1000000 {
> compatible = "qcom,ipq5332-tlmm";
> reg = <0x01000000 0x300000>;
--
With best wishes
Dmitry
next prev parent reply other threads:[~2023-07-10 11:21 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-10 10:37 [PATCH 0/6] Add IPQ5332 TSENS support Praveenkumar I
2023-07-10 10:37 ` [PATCH 1/6] dt-bindings: thermal: tsens: Add nvmem cells for calibration data Praveenkumar I
2023-07-10 20:10 ` Krzysztof Kozlowski
2023-07-11 9:39 ` Praveenkumar I
2023-07-11 9:52 ` Krzysztof Kozlowski
2023-07-11 14:13 ` Praveenkumar I
2023-07-13 11:38 ` Krzysztof Kozlowski
2023-07-10 10:37 ` [PATCH 2/6] thermal/drivers/tsens: Add TSENS enable and calibration support for V2 Praveenkumar I
2023-07-10 11:19 ` Dmitry Baryshkov
2023-07-10 11:22 ` Dmitry Baryshkov
2023-07-10 13:24 ` Praveenkumar I
2023-07-10 13:22 ` Praveenkumar I
2023-07-10 15:02 ` Dmitry Baryshkov
2023-07-11 9:19 ` Praveenkumar I
2023-07-10 10:37 ` [PATCH 3/6] dt-bindings: thermal: tsens: Add ipq5332 compatible Praveenkumar I
2023-07-10 20:06 ` Krzysztof Kozlowski
2023-07-11 9:24 ` Praveenkumar I
2023-07-10 10:37 ` [PATCH 4/6] arm64: dts: qcom: ipq5332: Add tsens node Praveenkumar I
2023-07-10 11:21 ` Dmitry Baryshkov [this message]
2023-07-10 13:25 ` Praveenkumar I
2023-07-10 20:07 ` Krzysztof Kozlowski
2023-07-11 9:27 ` Praveenkumar I
2023-07-10 10:37 ` [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes Praveenkumar I
2023-07-10 11:23 ` Dmitry Baryshkov
2023-07-10 12:14 ` Konrad Dybcio
2023-07-10 13:34 ` Praveenkumar I
2023-07-10 13:54 ` Praveenkumar I
2023-07-10 13:30 ` Praveenkumar I
2023-07-10 10:37 ` [PATCH 6/6] thermal/drivers/tsens: Add IPQ5332 support Praveenkumar I
2023-07-10 11:24 ` Dmitry Baryshkov
2023-07-10 13:47 ` Praveenkumar I
2023-07-10 15:03 ` Dmitry Baryshkov
2023-07-11 9:20 ` Praveenkumar I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72f053a5-2754-409a-d174-d05bba3a3f39@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_ipkumar@quicinc.com \
--cc=quic_varada@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®