Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add thermal zone nodes

[Praveenkumar I <quic_ipkumar@quicinc.com>]

On 7/10/2023 4:53 PM, Dmitry Baryshkov wrote:
> On 10/07/2023 13:37, Praveenkumar I wrote:
>> This patch adds thermal zone nodes for sensors present in
>> IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5332.dtsi | 72 +++++++++++++++++++++++++++
>>   1 file changed, 72 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
>> b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> index a1e3527178c0..8b276aeca53e 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
>> @@ -527,4 +527,76 @@ timer {
>>                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>>                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>;
>>       };
>> +
>> +    thermal-zones {
>> +        rfa-0-thermal{
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 11>;
>> +
>> +            trips {
>> +                rfa-0-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        rfa-1-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 12>;
>> +
>> +            trips {
>> +                rfa-1-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        misc-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 13>;
>> +
>> +            trips {
>> +                misc-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +
>> +        cpu-top-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 14>;
>> +
>> +            trips {
>> +                cpu-top-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>
> Could you please add a passive cooling devices for the CPU?
Sure, will add the passive trip.
>
>> +        };
>> +
>> +        top-glue-thermal {
>> +            polling-delay-passive = <0>;
>> +            polling-delay = <0>;
>> +            thermal-sensors = <&tsens 15>;
>> +
>> +            trips {
>> +                top-glue-critical {
>> +                    temperature = <125000>;
>> +                    hysteresis = <1000>;
>> +                    type = "critical";
>> +                };
>> +            };
>> +        };
>> +    };
>>   };
>
--
Thanks,
Praveenkumar