Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock

[Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>]

Hi Manikanta, My suggestion:

i2c: qcom-geni: Support systems with 32MHz serial engine clock
[Derive i2c clock from 32MHz Sourced clock]

On 9/26/2024 9:13 AM, Manikanta Mylavarapu wrote:
> In existing socs, I2C serial engine is sourced from XO (19.2MHz).
> Where as in IPQ5424, I2C serial engine is sourced from GPLL0 (32MHz).
> 
> The existing map table is based on 19.2MHz. This patch incorporate
incorporate/s/incorporates
> the clock map table to derive the SCL clock from the 32MHz source
> clock frequency.
> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
> Changes in v2:
> 	- Dropped IPQ5424 from the commit title
> 	- Added else part to assign geni_i2c_clk_map_19p2mhz to itr
> 	- Dropped MHZ macro and used HZ_PER_MHZ macro
> 	- Expanded SE to serial engine
> 	- Added the reason for 32MHz clock in commit message
> 
>   drivers/i2c/busses/i2c-qcom-geni.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 212336f724a6..22f2a0d83641 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -16,6 +16,7 @@
>   #include <linux/pm_runtime.h>
>   #include <linux/soc/qcom/geni-se.h>
>   #include <linux/spinlock.h>
> +#include <linux/units.h>
>   
>   #define SE_I2C_TX_TRANS_LEN		0x26c
>   #define SE_I2C_RX_TRANS_LEN		0x270
> @@ -146,18 +147,30 @@ struct geni_i2c_clk_fld {
>    * clk_freq_out = t / t_cycle
>    * source_clock = 19.2 MHz
>    */
> -static const struct geni_i2c_clk_fld geni_i2c_clk_map[] = {
> +static const struct geni_i2c_clk_fld geni_i2c_clk_map_19p2mhz[] = {
>   	{KHZ(100), 7, 10, 11, 26},
>   	{KHZ(400), 2,  5, 12, 24},
>   	{KHZ(1000), 1, 3,  9, 18},
>   };
>   
> +/* source_clock = 32 MHz */
> +static const struct geni_i2c_clk_fld geni_i2c_clk_map_32mhz[] = {
> +	{KHZ(100), 7, 14, 18, 40},
> +	{KHZ(400), 4,  3, 11, 20},
> +	{KHZ(1000), 4, 3,  6, 15},
> +};
> +
>   static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
>   {
>   	int i;
> -	const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
> +	const struct geni_i2c_clk_fld *itr;
> +
> +	if (clk_get_rate(gi2c->se.clk) == 32 * HZ_PER_MHZ)
> +		itr = geni_i2c_clk_map_32mhz;
> +	else
> +		itr = geni_i2c_clk_map_19p2mhz;
>   
> -	for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
> +	for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map_19p2mhz); i++, itr++) {
>   		if (itr->clk_freq_out == gi2c->clk_freq_out) {
>   			gi2c->clk_fld = itr;
>   			return 0;