* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
@ 2010-10-14 12:22 fabio tirapelle
0 siblings, 0 replies; 4+ messages in thread
From: fabio tirapelle @ 2010-10-14 12:22 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-kernel, Michael Krufky
The WinTV did work correctly with ubuntu 9.10. In this version of Ubuntu the
package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I
remember that Ubuntu 9.10 used dvb-fe-tda10046.fw.
Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw
Its seems that with the 9.10 version, the card is recognized as WinTV-HVR-1100
or 1110 and now as WinTV-HVR-1120.
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120
How recognize Linux the version of the card?
Thanks
----- Messaggio originale -----
> Da: fabio tirapelle <ftirapelle@yahoo.it>
> A: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Cc: linux-kernel@vger.kernel.org; Michael Krufky <mkrufky@kernellabs.com>
> Inviato: Mer 13 ottobre 2010, 23:26:02
> Oggetto: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
>
>
> Yesterday I have installed (added not substituted) a new tuner: Hauppauge
> Nova-T Stick 3
> Today the WinTV-HVR-1120 doesn't works.
> I attach my /var/log/messages
>
> lsusb
>
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 15c2:0036 SoundGraph Inc.
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 002: ID 2040:7070 Hauppauge Nova-T Stick 3
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> lscpi
>
> 00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a2)
> 00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev
> a2)
> 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
> 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a1)
> 00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor
> (rev
> a2)
> 00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
>Controller
> (rev a1)
> 00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
> Controller (rev a1)
> 00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
2.0
> Controller (rev a1)
> 00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
> Controller (rev a1)
> 00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
>2.0
> Controller (rev a1)
> 00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
> 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High
> Definition Audio (rev a1)
> 00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev
> a1)
> 00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA
>Controller
> (non-AHCI mode) (rev a2)
> 00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
> 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
>Bridge
> (rev a1)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
>Address
> Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> 01:06.0 Multimedia controller: Philips Semiconductors
SAA7131/SAA7133/SAA7135
> Video Broadcast Decoder (rev d1)
> 01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
>chip
>
> /
> Technisat SkyStar2 DVB card (rev 02)
> 02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200]
(rev
> a2)
>
>
> > ----- Messaggio originale -----
> > > Da: Bjorn Helgaas <bjorn.helgaas@hp.com>
> > > A: fabio tirapelle <ftirapelle@yahoo.it>
> > > Cc: linux-kernel@vger.kernel.org; Michael Krufky
<mkrufky@kernellabs.com>
> > > Inviato: Mer 13 ottobre 2010, 21:54:31
> > > Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
> > >
> > > On Wednesday, October 13, 2010 01:02:11 pm fabio tirapelle wrote:
> > > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
> >WinTV-HVR-1120
> >
> > >
> > > > (sometimes) doesn't work correctly.
> > > > I get random the following errors:
> > > >
> > > > tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
>returned:
>
> -5
> > > > tda18271_init: error -5 on line 826
> > > > tda18271_tune: error -5 on line 904
> > > > tda18271_set_params: error -5 on line 985
> > >
> > > I cc'd Michael since he made several recent tda18271 changes.
> > >
> > > This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
> > > suggests that the card might work, despite the error messages. Does
> > > yours work?
> > >
> > > I see that tda18271_write_regs() uses i2c_transfer(), which uses the
> > > adap->algo->master_xfer function pointer, but I don't know enough to
> > > figure out which master_xfer implementation might be used on your
> > > system. A complete dmesg log and lspci output might have a hint.
> > >
> > > Can you reproduce this on an upstream kernel? It would be good to
> > > make sure that it's not something introduced by an Ubuntu patch or
> > > fixed since the Ubuntu kernel snapshot.
> > >
> > > Bjorn
> > >
> > > > Part of dmesg of 11-OCT-2010
> > > >
> > > > [ 53.216153] DVB: registering new adapter (saa7133[0])
> > > > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> > >DVB-T)...
> > > > [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> > > > (dvb-fe-tda10048-1.0.fw)...
> > > > [ 53.840019] saa7134 0000:01:06.0: firmware: requesting
> > >dvb-fe-tda10048-1.0.fw
> > > > [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> > > > [ 53.880509] tda10048_firmware_upload: firmware uploading
> > > > [ 58.280136] tda10048_firmware_upload: firmware uploaded
> > > > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on
> >line
> >
> > >264
> > > > [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 59.420157] tda18271_toggle_output: error -5 on line 47
> > > > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> > > > [ 256.293639] eth0: link up.
> > > > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > > > [ 263.523498] eth0: link down.
> > > > [ 265.258740] eth0: link up.
> > > > [ 266.460026] eth0: no IPv6 routers present
> > > > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9869.636178] tda18271_init: error -5 on line 826
> > > > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> > > > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 9998.240178] tda18271_init: error -5 on line 826
> > > > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [10001.240190] tda18271_toggle_output: error -5 on line 47
> > > >
> > > > And this is the dmesg of today: even the same errors.
> > > >
> > > > [ 741.252183] tda18271_init: error -5 on line 826
> > > > [ 741.252188] tda18271_tune: error -5 on line 904
> > > > [ 741.252193] tda18271_set_params: error -5 on line 985
> > > > [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 742.268184] tda18271_init: error -5 on line 826
> > > > [ 742.268189] tda18271_tune: error -5 on line 904
> > > > [ 742.268194] tda18271_set_params: error -5 on line 985
> > > > [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 743.284184] tda18271_init: error -5 on line 826
> > > > [ 743.284190] tda18271_tune: error -5 on line 904
> > > > [ 743.284194] tda18271_set_params: error -5 on line 985
> > > > [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 744.300180] tda18271_init: error -5 on line 826
> > > > [ 744.300185] tda18271_tune: error -5 on line 904
> > > > [ 744.300190] tda18271_set_params: error -5 on line 985
> > > > [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 745.320183] tda18271_init: error -5 on line 826
> > > > [ 745.320188] tda18271_tune: error -5 on line 904
> > > > [ 745.320193] tda18271_set_params: error -5 on line 985
> > > > [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 746.336185] tda18271_init: error -5 on line 826
> > > > [ 746.336190] tda18271_tune: error -5 on line 904
> > > > [ 746.336195] tda18271_set_params: error -5 on line 985
> > > > [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 747.352181] tda18271_init: error -5 on line 826
> > > > [ 747.352187] tda18271_tune: error -5 on line 904
> > > > [ 747.352192] tda18271_set_params: error -5 on line 985
> > > > [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 748.368183] tda18271_init: error -5 on line 826
> > > > [ 748.368188] tda18271_tune: error -5 on line 904
> > > > [ 748.368193] tda18271_set_params: error -5 on line 985
> > > > [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 749.384191] tda18271_init: error -5 on line 826
> > > > [ 749.384196] tda18271_tune: error -5 on line 904
> > > > [ 749.384202] tda18271_set_params: error -5 on line 985
> > > > [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 750.400182] tda18271_init: error -5 on line 826
> > > > [ 750.400188] tda18271_tune: error -5 on line 904
> > > > [ 750.400194] tda18271_set_params: error -5 on line 985
> > > > [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > > [ 751.424181] tda18271_init: error -5 on line 826
> > > > [ 751.424186] tda18271_tune: error -5 on line 904
> > > > [ 751.424192] tda18271_set_params: error -5 on line 985
> > > > [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
> >i2c_transfer
> >
> >
> > > > returned: -5
> > > >
>
>
> >
> >
> > >
> > >
> > > >
> > > >
> > > > Any ideas?
> > > > Thanks
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
@ 2010-10-13 21:26 fabio tirapelle
0 siblings, 0 replies; 4+ messages in thread
From: fabio tirapelle @ 2010-10-13 21:26 UTC (permalink / raw)
To: Bjorn Helgaas; +Cc: linux-kernel, Michael Krufky
[-- Attachment #1: Type: text/plain, Size: 10301 bytes --]
Yesterday I have installed (added not substituted) a new tuner: Hauppauge
Nova-T Stick 3
Today the WinTV-HVR-1120 doesn't works.
I attach my /var/log/messages
lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 15c2:0036 SoundGraph Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2040:7070 Hauppauge Nova-T Stick 3
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lscpi
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev
a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor
(rev
a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1
Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0
Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1
Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0
Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High
Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev
a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller
(non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip
/
Technisat SkyStar2 DVB card (rev 02)
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev
a2)
> ----- Messaggio originale -----
> > Da: Bjorn Helgaas <bjorn.helgaas@hp.com>
> > A: fabio tirapelle <ftirapelle@yahoo.it>
> > Cc: linux-kernel@vger.kernel.org; Michael Krufky <mkrufky@kernellabs.com>
> > Inviato: Mer 13 ottobre 2010, 21:54:31
> > Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
> >
> > On Wednesday, October 13, 2010 01:02:11 pm fabio tirapelle wrote:
> > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
>WinTV-HVR-1120
>
> >
> > > (sometimes) doesn't work correctly.
> > > I get random the following errors:
> > >
> > > tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned:
-5
> > > tda18271_init: error -5 on line 826
> > > tda18271_tune: error -5 on line 904
> > > tda18271_set_params: error -5 on line 985
> >
> > I cc'd Michael since he made several recent tda18271 changes.
> >
> > This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
> > suggests that the card might work, despite the error messages. Does
> > yours work?
> >
> > I see that tda18271_write_regs() uses i2c_transfer(), which uses the
> > adap->algo->master_xfer function pointer, but I don't know enough to
> > figure out which master_xfer implementation might be used on your
> > system. A complete dmesg log and lspci output might have a hint.
> >
> > Can you reproduce this on an upstream kernel? It would be good to
> > make sure that it's not something introduced by an Ubuntu patch or
> > fixed since the Ubuntu kernel snapshot.
> >
> > Bjorn
> >
> > > Part of dmesg of 11-OCT-2010
> > >
> > > [ 53.216153] DVB: registering new adapter (saa7133[0])
> > > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> >DVB-T)...
> > > [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> > > (dvb-fe-tda10048-1.0.fw)...
> > > [ 53.840019] saa7134 0000:01:06.0: firmware: requesting
> >dvb-fe-tda10048-1.0.fw
> > > [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> > > [ 53.880509] tda10048_firmware_upload: firmware uploading
> > > [ 58.280136] tda10048_firmware_upload: firmware uploaded
> > > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on
>line
>
> >264
> > > [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 59.420157] tda18271_toggle_output: error -5 on line 47
> > > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> > > [ 256.293639] eth0: link up.
> > > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > > [ 263.523498] eth0: link down.
> > > [ 265.258740] eth0: link up.
> > > [ 266.460026] eth0: no IPv6 routers present
> > > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9869.636178] tda18271_init: error -5 on line 826
> > > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> > > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9998.240178] tda18271_init: error -5 on line 826
> > > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [10001.240190] tda18271_toggle_output: error -5 on line 47
> > >
> > > And this is the dmesg of today: even the same errors.
> > >
> > > [ 741.252183] tda18271_init: error -5 on line 826
> > > [ 741.252188] tda18271_tune: error -5 on line 904
> > > [ 741.252193] tda18271_set_params: error -5 on line 985
> > > [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 742.268184] tda18271_init: error -5 on line 826
> > > [ 742.268189] tda18271_tune: error -5 on line 904
> > > [ 742.268194] tda18271_set_params: error -5 on line 985
> > > [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 743.284184] tda18271_init: error -5 on line 826
> > > [ 743.284190] tda18271_tune: error -5 on line 904
> > > [ 743.284194] tda18271_set_params: error -5 on line 985
> > > [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 744.300180] tda18271_init: error -5 on line 826
> > > [ 744.300185] tda18271_tune: error -5 on line 904
> > > [ 744.300190] tda18271_set_params: error -5 on line 985
> > > [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 745.320183] tda18271_init: error -5 on line 826
> > > [ 745.320188] tda18271_tune: error -5 on line 904
> > > [ 745.320193] tda18271_set_params: error -5 on line 985
> > > [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 746.336185] tda18271_init: error -5 on line 826
> > > [ 746.336190] tda18271_tune: error -5 on line 904
> > > [ 746.336195] tda18271_set_params: error -5 on line 985
> > > [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 747.352181] tda18271_init: error -5 on line 826
> > > [ 747.352187] tda18271_tune: error -5 on line 904
> > > [ 747.352192] tda18271_set_params: error -5 on line 985
> > > [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 748.368183] tda18271_init: error -5 on line 826
> > > [ 748.368188] tda18271_tune: error -5 on line 904
> > > [ 748.368193] tda18271_set_params: error -5 on line 985
> > > [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 749.384191] tda18271_init: error -5 on line 826
> > > [ 749.384196] tda18271_tune: error -5 on line 904
> > > [ 749.384202] tda18271_set_params: error -5 on line 985
> > > [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 750.400182] tda18271_init: error -5 on line 826
> > > [ 750.400188] tda18271_tune: error -5 on line 904
> > > [ 750.400194] tda18271_set_params: error -5 on line 985
> > > [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 751.424181] tda18271_init: error -5 on line 826
> > > [ 751.424186] tda18271_tune: error -5 on line 904
> > > [ 751.424192] tda18271_set_params: error -5 on line 985
> > > [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > >
>
>
> >
> >
> > >
> > >
> > > Any ideas?
> > > Thanks
> > >
> > >
> > >
> > >
> >
>
>
>
[-- Attachment #2: messages.zip --]
[-- Type: application/zip, Size: 27956 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
2010-10-13 19:02 fabio tirapelle
@ 2010-10-13 19:54 ` Bjorn Helgaas
0 siblings, 0 replies; 4+ messages in thread
From: Bjorn Helgaas @ 2010-10-13 19:54 UTC (permalink / raw)
To: fabio tirapelle; +Cc: linux-kernel, Michael Krufky
On Wednesday, October 13, 2010 01:02:11 pm fabio tirapelle wrote:
> After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
> (sometimes) doesn't work correctly.
> I get random the following errors:
>
> tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
> tda18271_init: error -5 on line 826
> tda18271_tune: error -5 on line 904
> tda18271_set_params: error -5 on line 985
I cc'd Michael since he made several recent tda18271 changes.
This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
suggests that the card might work, despite the error messages. Does
yours work?
I see that tda18271_write_regs() uses i2c_transfer(), which uses the
adap->algo->master_xfer function pointer, but I don't know enough to
figure out which master_xfer implementation might be used on your
system. A complete dmesg log and lspci output might have a hint.
Can you reproduce this on an upstream kernel? It would be good to
make sure that it's not something introduced by an Ubuntu patch or
fixed since the Ubuntu kernel snapshot.
Bjorn
> Part of dmesg of 11-OCT-2010
>
> [ 53.216153] DVB: registering new adapter (saa7133[0])
> [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
> [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> (dvb-fe-tda10048-1.0.fw)...
> [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
> [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> [ 53.880509] tda10048_firmware_upload: firmware uploading
> [ 58.280136] tda10048_firmware_upload: firmware uploaded
> [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
> [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 59.420157] tda18271_toggle_output: error -5 on line 47
> [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> [ 256.293639] eth0: link up.
> [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 263.523498] eth0: link down.
> [ 265.258740] eth0: link up.
> [ 266.460026] eth0: no IPv6 routers present
> [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9869.636178] tda18271_init: error -5 on line 826
> [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9998.240178] tda18271_init: error -5 on line 826
> [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [10001.240190] tda18271_toggle_output: error -5 on line 47
>
> And this is the dmesg of today: even the same errors.
>
> [ 741.252183] tda18271_init: error -5 on line 826
> [ 741.252188] tda18271_tune: error -5 on line 904
> [ 741.252193] tda18271_set_params: error -5 on line 985
> [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 742.268184] tda18271_init: error -5 on line 826
> [ 742.268189] tda18271_tune: error -5 on line 904
> [ 742.268194] tda18271_set_params: error -5 on line 985
> [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 743.284184] tda18271_init: error -5 on line 826
> [ 743.284190] tda18271_tune: error -5 on line 904
> [ 743.284194] tda18271_set_params: error -5 on line 985
> [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 744.300180] tda18271_init: error -5 on line 826
> [ 744.300185] tda18271_tune: error -5 on line 904
> [ 744.300190] tda18271_set_params: error -5 on line 985
> [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 745.320183] tda18271_init: error -5 on line 826
> [ 745.320188] tda18271_tune: error -5 on line 904
> [ 745.320193] tda18271_set_params: error -5 on line 985
> [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 746.336185] tda18271_init: error -5 on line 826
> [ 746.336190] tda18271_tune: error -5 on line 904
> [ 746.336195] tda18271_set_params: error -5 on line 985
> [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 747.352181] tda18271_init: error -5 on line 826
> [ 747.352187] tda18271_tune: error -5 on line 904
> [ 747.352192] tda18271_set_params: error -5 on line 985
> [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 748.368183] tda18271_init: error -5 on line 826
> [ 748.368188] tda18271_tune: error -5 on line 904
> [ 748.368193] tda18271_set_params: error -5 on line 985
> [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 749.384191] tda18271_init: error -5 on line 826
> [ 749.384196] tda18271_tune: error -5 on line 904
> [ 749.384202] tda18271_set_params: error -5 on line 985
> [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 750.400182] tda18271_init: error -5 on line 826
> [ 750.400188] tda18271_tune: error -5 on line 904
> [ 750.400194] tda18271_set_params: error -5 on line 985
> [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 751.424181] tda18271_init: error -5 on line 826
> [ 751.424186] tda18271_tune: error -5 on line 904
> [ 751.424192] tda18271_set_params: error -5 on line 985
> [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
>
>
>
> Any ideas?
> Thanks
>
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
@ 2010-10-13 19:02 fabio tirapelle
2010-10-13 19:54 ` Bjorn Helgaas
0 siblings, 1 reply; 4+ messages in thread
From: fabio tirapelle @ 2010-10-13 19:02 UTC (permalink / raw)
To: linux-kernel; +Cc: bjorn.helgaas
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
(sometimes) doesn't work correctly.
I get random the following errors:
tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_init: error -5 on line 826
tda18271_tune: error -5 on line 904
tda18271_set_params: error -5 on line 985
Part of dmesg of 11-OCT-2010
[ 53.216153] DVB: registering new adapter (saa7133[0])
[ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[ 53.840013] tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
[ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
[ 53.880509] tda10048_firmware_upload: firmware uploading
[ 58.280136] tda10048_firmware_upload: firmware uploaded
[ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
[ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.420157] tda18271_toggle_output: error -5 on line 47
[ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
[ 256.293639] eth0: link up.
[ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 263.523498] eth0: link down.
[ 265.258740] eth0: link up.
[ 266.460026] eth0: no IPv6 routers present
[ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9869.636178] tda18271_init: error -5 on line 826
[ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9872.636232] tda18271_toggle_output: error -5 on line 47
[ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9998.240178] tda18271_init: error -5 on line 826
[10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[10001.240190] tda18271_toggle_output: error -5 on line 47
And this is the dmesg of today: even the same errors.
[ 741.252183] tda18271_init: error -5 on line 826
[ 741.252188] tda18271_tune: error -5 on line 904
[ 741.252193] tda18271_set_params: error -5 on line 985
[ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 742.268184] tda18271_init: error -5 on line 826
[ 742.268189] tda18271_tune: error -5 on line 904
[ 742.268194] tda18271_set_params: error -5 on line 985
[ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 743.284184] tda18271_init: error -5 on line 826
[ 743.284190] tda18271_tune: error -5 on line 904
[ 743.284194] tda18271_set_params: error -5 on line 985
[ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 744.300180] tda18271_init: error -5 on line 826
[ 744.300185] tda18271_tune: error -5 on line 904
[ 744.300190] tda18271_set_params: error -5 on line 985
[ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 745.320183] tda18271_init: error -5 on line 826
[ 745.320188] tda18271_tune: error -5 on line 904
[ 745.320193] tda18271_set_params: error -5 on line 985
[ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 746.336185] tda18271_init: error -5 on line 826
[ 746.336190] tda18271_tune: error -5 on line 904
[ 746.336195] tda18271_set_params: error -5 on line 985
[ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 747.352181] tda18271_init: error -5 on line 826
[ 747.352187] tda18271_tune: error -5 on line 904
[ 747.352192] tda18271_set_params: error -5 on line 985
[ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 748.368183] tda18271_init: error -5 on line 826
[ 748.368188] tda18271_tune: error -5 on line 904
[ 748.368193] tda18271_set_params: error -5 on line 985
[ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 749.384191] tda18271_init: error -5 on line 826
[ 749.384196] tda18271_tune: error -5 on line 904
[ 749.384202] tda18271_set_params: error -5 on line 985
[ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 750.400182] tda18271_init: error -5 on line 826
[ 750.400188] tda18271_tune: error -5 on line 904
[ 750.400194] tda18271_set_params: error -5 on line 985
[ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 751.424181] tda18271_init: error -5 on line 826
[ 751.424186] tda18271_tune: error -5 on line 904
[ 751.424192] tda18271_set_params: error -5 on line 985
[ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
Any ideas?
Thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-10-14 12:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-14 12:22 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
-- strict thread matches above, loose matches on Subject: below --
2010-10-13 21:26 fabio tirapelle
2010-10-13 19:02 fabio tirapelle
2010-10-13 19:54 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®