Re: [PATCH v2 07/11] clk: qcom: rpmh: add support for SAR2130P

[Taniya Das <quic_tdas@quicinc.com>]

On 10/21/2024 4:00 PM, Dmitry Baryshkov wrote:
> Define clocks as supported by the RPMh on the SAR2130P platform. It
> seems that on this platform RPMh models only CXO clock.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/clk/qcom/clk-rpmh.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> index 4acde937114af3d7fdc15f3d125a72d42d0fde21..8cb15430d0171a8ed6b05e51d1901af63a4564c4 100644
> --- a/drivers/clk/qcom/clk-rpmh.c
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -389,6 +389,16 @@ DEFINE_CLK_RPMH_BCM(ipa, "IP0");
>   DEFINE_CLK_RPMH_BCM(pka, "PKA0");
>   DEFINE_CLK_RPMH_BCM(qpic_clk, "QP0");
>   
> +static struct clk_hw *sar2130p_rpmh_clocks[] = {
> +	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div1.hw,
> +	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div1_ao.hw,
> +};
> +

Dimtry, could you please add these clocks as well?

DEFINE_CLK_RPMH_VRM-- > rf_clk1, rf_clk1_ao, "clka1", 1
DEFINE_CLK_RPMH_VRM --> ln_bb_clk7, ln_bb_clk7_ao, "clka7", 2
DEFINE_CLK_RPMH_VRM --> ln_bb_clk8, ln_bb_clk8_ao, "clka8", 4
DEFINE_CLK_RPMH_VRM --> ln_bb_clk9, ln_bb_clk9_ao, "clka9", 2

> +static const struct clk_rpmh_desc clk_rpmh_sar2130p = {
> +	.clks = sar2130p_rpmh_clocks,
> +	.num_clks = ARRAY_SIZE(sar2130p_rpmh_clocks),
> +};
> +


-- 
Thanks & Regards,
Taniya Das.