mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tyler Baicar <tbaicar@codeaurora.org>
To: Borislav Petkov <bp@suse.de>
Cc: rjw@rjwysocki.net, tony.luck@intel.com, will.deacon@arm.com,
	james.morse@arm.com, linux-acpi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3 2/2] acpi: apei: call into AER handling regardless of severity
Date: Thu, 9 Nov 2017 10:14:35 -0500	[thread overview]
Message-ID: <74cee7d2-dffa-0559-d529-5c86023161e3@codeaurora.org> (raw)
In-Reply-To: <20171109094654.daymsvizctfrypbo@pd.tnic>

On 11/9/2017 4:46 AM, Borislav Petkov wrote:
> On Wed, Nov 08, 2017 at 12:13:12PM -0700, Tyler Baicar wrote:
>> Currently the GHES code only calls into the AER driver for
>> recoverable type errors. This is incorrect because errors of
>> other severities do not get logged by the AER driver and do not
>> get exposed to user space via the AER trace event. So, call
>> into the AER driver for PCIe errors regardless of the severity
>>
>> Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
>> ---
>>   drivers/acpi/apei/ghes.c | 8 +++-----
>>   1 file changed, 3 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
>> index 839c3d5..bb65fa6 100644
>> --- a/drivers/acpi/apei/ghes.c
>> +++ b/drivers/acpi/apei/ghes.c
>> @@ -458,14 +458,12 @@ static void ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, int
>>   #endif
>>   }
> Where did the explanatory comment go?
>
> +/*
> + * PCIe AER errors need to be sent to the AER driver for reporting and
> + * recovery. The GHES severities map to the following AER severities and
> + * require the following handling:
> + *
> + * GHES_SEV_CORRECTABLE -> AER_CORRECTABLE
> + *     These need to be reported by the AER driver but no recovery is
> + *     necessary.
> + * GHES_SEV_RECOVERABLE -> AER_NONFATAL
> + * GHES_SEV_RECOVERABLE && CPER_SEC_RESET -> AER_FATAL
> + *     These both need to be reported and recovered from by the AER driver.
> + * GHES_SEV_PANIC does not make it to this handling since the kernel must
> + *     panic.
> + */
>
> <--- ???
Updated patch including the comment:

Currently the GHES code only calls into the AER driver for
recoverable type errors. This is incorrect because errors of
other severities do not get logged by the AER driver and do not
get exposed to user space via the AER trace event. So, call
into the AER driver for PCIe errors regardless of the severity

Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
---
  drivers/acpi/apei/ghes.c | 22 +++++++++++++++++-----
  1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 839c3d5..15dbf65 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -458,14 +458,26 @@ static void ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, int
  #endif
  }
  
-static void ghes_handle_aer(struct acpi_hest_generic_data *gdata, int sev, int sec_sev)
+/*
+ * PCIe AER errors need to be sent to the AER driver for reporting and
+ * recovery. The GHES severities map to the following AER severities and
+ * require the following handling:
+ *
+ * GHES_SEV_CORRECTABLE -> AER_CORRECTABLE
+ *     These need to be reported by the AER driver but no recovery is
+ *     necessary.
+ * GHES_SEV_RECOVERABLE -> AER_NONFATAL
+ * GHES_SEV_RECOVERABLE && CPER_SEC_RESET -> AER_FATAL
+ *     These both need to be reported and recovered from by the AER driver.
+ * GHES_SEV_PANIC does not make it to this handling since the kernel must
+ *     panic.
+ */
+static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
  {
  #ifdef CONFIG_ACPI_APEI_PCIEAER
  	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
  
-	if (sev == GHES_SEV_RECOVERABLE &&
-	    sec_sev == GHES_SEV_RECOVERABLE &&
-	    pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
+	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
  	    pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
  		unsigned int devfn;
  		int aer_severity;
@@ -519,7 +531,7 @@ static void ghes_do_proc(struct ghes *ghes,
  			ghes_handle_memory_failure(gdata, sev);
  		}
  		else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
-			ghes_handle_aer(gdata, sev, sec_sev);
+			ghes_handle_aer(gdata);
  		}
  		else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
  			struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
--

Thanks,
Tyler

-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

  parent reply	other threads:[~2017-11-09 15:14 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-08 19:13 [PATCH 0/2] Restructure and fix GHES PCIe AER handling Tyler Baicar
2017-11-08 19:13 ` [PATCH 1/2] acpi: apei: handle PCIe AER errors in separate function Tyler Baicar
2017-11-09 17:21   ` Borislav Petkov
2017-11-08 19:13 ` [PATCH V3 2/2] acpi: apei: call into AER handling regardless of severity Tyler Baicar
2017-11-09  9:46   ` Borislav Petkov
2017-11-09 14:37     ` Tyler Baicar
2017-11-09 15:01       ` Borislav Petkov
2017-11-09 15:14     ` Tyler Baicar [this message]
2017-11-09 17:29       ` Borislav Petkov
2017-11-13 12:36   ` Dongdong Liu
2017-11-13 15:34     ` Tyler Baicar
2017-11-15 15:14 Tyler Baicar
2017-11-18 14:54 ` Rafael J. Wysocki
2017-11-28 10:57 ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=74cee7d2-dffa-0559-d529-5c86023161e3@codeaurora.org \
    --to=tbaicar@codeaurora.org \
    --cc=bp@suse.de \
    --cc=james.morse@arm.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=tony.luck@intel.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome