* Booting latest linux kernel(2.6.20) on MPC8548ECDS
@ 2007-11-27 5:54 rajendra prasad
2007-11-27 7:40 ` Kumar Gala
0 siblings, 1 reply; 2+ messages in thread
From: rajendra prasad @ 2007-11-27 5:54 UTC (permalink / raw)
To: linux-kernel
Hi,
I am using MPC8548ECDS board from CDS for my telecom application. I am
able to build 2.6.10 linux kernel and boot 2.6.10 kernel on
MPC8548ECDS board.When I take same configuration file and built
successfully but not able to boot on MPC8548E CDS board.I am using
u-boot-1.1.6 as boot loader.I came to know taht latest kernel is
booted with new procedure.Pls tell me the procedure how to boot
procedure.
Regards,.
RAJ
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Booting latest linux kernel(2.6.20) on MPC8548ECDS
2007-11-27 5:54 Booting latest linux kernel(2.6.20) on MPC8548ECDS rajendra prasad
@ 2007-11-27 7:40 ` Kumar Gala
0 siblings, 0 replies; 2+ messages in thread
From: Kumar Gala @ 2007-11-27 7:40 UTC (permalink / raw)
To: rajendra prasad; +Cc: linux-kernel, linuxppc-dev
On Nov 26, 2007, at 11:54 PM, rajendra prasad wrote:
> Hi,
>
> I am using MPC8548ECDS board from CDS for my telecom application. I am
> able to build 2.6.10 linux kernel and boot 2.6.10 kernel on
> MPC8548ECDS board.When I take same configuration file and built
> successfully but not able to boot on MPC8548E CDS board.I am using
> u-boot-1.1.6 as boot loader.I came to know taht latest kernel is
> booted with new procedure.Pls tell me the procedure how to boot
> procedure.
Ask this question on the linuxppc-dev list. You're more likely to get
an answer.
Its unclear, but you are trying to use the latest kernel on a MPC8548E
CDS?
- k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-11-27 7:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-11-27 5:54 Booting latest linux kernel(2.6.20) on MPC8548ECDS rajendra prasad
2007-11-27 7:40 ` Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®