mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Camel Guo <Camel.Guo@axis.com>
To: Rob Herring <robh@kernel.org>, Camel Guo <Camel.Guo@axis.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
	Jean Delvare <jdelvare@suse.com>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	"linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	kernel <kernel@axis.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x
Date: Wed, 13 Apr 2022 09:13:39 +0000	[thread overview]
Message-ID: <77167ffd-5674-9f6f-df51-3233e67fe9a7@axis.com> (raw)
In-Reply-To: <YlXwyKkkC1VoPpjU@robh.at.kernel.org>

On 4/12/22 23:36, Rob Herring wrote:
> On Tue, Apr 12, 2022 at 03:52:31PM +0200, Camel Guo wrote:
>> Document the TMP401, TMP411 and TMP43x device devicetree bindings
>> 
>> Signed-off-by: Camel Guo <camel.guo@axis.com>
>> ---
>> 
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - ti,tmp401
>> +      - ti,tmp411
>> +      - ti,tmp431
>> +      - ti,tmp432
>> +      - ti,tmp435
>> +
>> +  reg:
>> +    maxItems: 1
>> +
> 
>> +  '#address-cells':
>> +    const: 1
>> +
>> +  '#size-cells':
>> +    const: 0
> 
> You don't have any child nodes and these are for child nodes with 'reg'.

Ack! I will fix it in v3.
> 
>> +
>> +  ti,extended-range-enable:
>> +    description:
>> +      When set, this sensor measures over extended temperature range.
>> +    type: boolean
>> +
>> +  ti,n-factor:
> 
> Funny, I just ran across this property today for tmp421...
> 
> Can the schema be shared?

Yes, this property is in ti,tmp421.yaml and ti,tmp464.yaml as well. But 
I guess maybe it is better to separate tmp401 from them.

That is because the chips supported in ti,tmp421,yaml has three channels 
and the chips supported in ti,tmp464.yaml has eight channels and this 
property n-factor is for each channel/child node. But the chips 
supported in ti,tmp401.yaml only has one channel. n-factor is for this 
chip.

> 
>> +    description:
>> +      value to be used for converting remote channel measurements to
>> +      temperature.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    items:
>> +      minimum: 0
>> +      maximum: 255
> 
> Isn't this property signed and should be -128 to -127? The code treats
> the existing cases as signed. One schema is correct and one is like you
> have it.

Ack! will fix it in v3

> 
>> +
>> +  ti,beta-compensation:
>> +    description:
>> +      value to select beta correction range.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    items:
>> +      minimum: 0
>> +      maximum: 15
> 
> Drop 'items'. It is not an array.

Not sure if I understand correctly. Do you means it should be like this? 
If so, I guess ti,n-factor should also be changed like this. Am I right?

   ti,beta-compensation:
    description:
      value to select beta correction range.
      $ref: /schemas/types.yaml#/definitions/uint32
      minimum: 0
      maximum: 15

> 
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - ti,tmp401
>> +    then:
>> +      properties:
>> +        ti,n-factor: false
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - ti,tmp401
>> +              - ti,tmp411
>> +    then:
>> +      properties:
>> +        ti,beta-compensation: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    i2c {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      sensor@4c {
>> +        compatible = "ti,tmp401";
>> +        reg = <0x4c>;
>> +      };
>> +    };
>> +  - |
>> +    i2c {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      sensor@4c {
>> +        compatible = "ti,tmp431";
>> +        reg = <0x4c>;
>> +        ti,extended-range-enable;
>> +        ti,n-factor = <0x3b>;
>> +        ti,beta-compensation = <0x7>;
>> +      };
>> +    };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 61d9f114c37f..6b0d8f5cc68e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19838,6 +19838,7 @@ TMP401 HARDWARE MONITOR DRIVER
>>  M:   Guenter Roeck <linux@roeck-us.net>
>>  L:   linux-hwmon@vger.kernel.org
>>  S:   Maintained
>> +F:   Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
>>  F:   Documentation/hwmon/tmp401.rst
>>  F:   drivers/hwmon/tmp401.c
>>  
>> -- 
>> 2.30.2
>> 
>> 

Thanks for your review. I will fix most of these comments in v3.


  reply	other threads:[~2022-04-13  9:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-12 13:52 [PATCH v2 0/2] hwmon/tmp401: add support of three advanced features Camel Guo
2022-04-12 13:52 ` [PATCH v2 1/2] dt-bindings: hwmon: Add TMP401, TMP411 and TMP43x Camel Guo
2022-04-12 16:30   ` Krzysztof Kozlowski
2022-04-12 21:36   ` Rob Herring
2022-04-13  9:13     ` Camel Guo [this message]
2022-04-13 13:34       ` Rob Herring
2022-04-13 14:16         ` Camel Guo
2022-04-12 13:52 ` [PATCH v2 2/2] hwmon: (tmp401) Add support of three advanced features Camel Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=77167ffd-5674-9f6f-df51-3233e67fe9a7@axis.com \
    --to=camel.guo@axis.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=kernel@axis.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®