[PATCH 0/2] arm64: dts: freescale: add i.MX937 FRDM board support

[PATCH 0/2] arm64: dts: freescale: add i.MX937 FRDM board support

[Joy Zou]

The i.MX937 is a derivative of the i.MX952 SoC, so it reuses the i.MX952
device tree as its base.

This series adds the DT binding compatible string for the NXP i.MX937
FRDM board and the device tree support for the board.

Compared to the i.MX952, the i.MX937 drops the local dimming and ISP
blocks and runs its Cortex-A55 cores at a lower maximum frequency. The
PCAL6416 GPIO expander is at I2C address 0x21 on i.MX937 FRDM, unlike
0x20 on i.MX952 FRDM.

Signed-off-by: Joy Zou <joy.zou@oss.nxp.com>
---
Joy Zou (2):
      dt-bindings: arm: fsl: add i.MX937 FRDM board
      arm64: dts: freescale: add i.MX937 FRDM board support

 Documentation/devicetree/bindings/arm/fsl.yaml |   7 ++
 arch/arm64/boot/dts/freescale/Makefile         |   1 +
 arch/arm64/boot/dts/freescale/imx937-frdm.dts  | 111 +++++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx937.dtsi      |  12 +++
 4 files changed, 131 insertions(+)
---
base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
change-id: 20261019-b4-imx937-frdm-84ae3d4b72c1

Best regards,
--  
Joy Zou <joy.zou@oss.nxp.com>

[PATCH 1/2] dt-bindings: arm: fsl: add i.MX937 FRDM board

[Joy Zou]

Add DT compatible string for NXP i.MX937 FRDM board.

Signed-off-by: Joy Zou <joy.zou@oss.nxp.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index c8290a83205b..af10cac62f90 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1570,6 +1570,13 @@ properties:
           - const: toradex,osm-imx93
           - const: fsl,imx93
 
+      - description: i.MX937 based Boards
+        items:
+          - enum:
+              - fsl,imx937-frdm           # i.MX937 FRDM Board
+          - const: fsl,imx937
+          - const: fsl,imx952
+
       - description: i.MX94 based Boards
         items:
           - enum:

-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: arm: fsl: add i.MX937 FRDM board

[Marco Felsch]

Hi Joy,

On 26-10-19 19:10, Joy Zou wrote:
> Add DT compatible string for NXP i.MX937 FRDM board.
> 
> Signed-off-by: Joy Zou <joy.zou@oss.nxp.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index c8290a83205b..af10cac62f90 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -1570,6 +1570,13 @@ properties:
>            - const: toradex,osm-imx93
>            - const: fsl,imx93
>  
> +      - description: i.MX937 based Boards
> +        items:
> +          - enum:
> +              - fsl,imx937-frdm           # i.MX937 FRDM Board
> +          - const: fsl,imx937
> +          - const: fsl,imx952

At least to me it seems odd that you specify two SoC compatibles here.

Side note (obviously not something you could influence):

NXP should really work on their product family names. If some
i.mx95<foo> is compatible with i.mx95<bla> I would call it i.mx95<foo>
and not i.mx93<foo>.

Regards,
  Marco

> +
>        - description: i.MX94 based Boards
>          items:
>            - enum:
> 
> -- 
> 2.34.1
> 
> 
> 

Re: [PATCH 1/2] dt-bindings: arm: fsl: add i.MX937 FRDM board

[Krzysztof Kozlowski]

On Mon, Oct 19, 2026 at 07:10:32PM +0800, Joy Zou wrote:
> Add DT compatible string for NXP i.MX937 FRDM board.

So where do you explain used imx952 here?

Best regards,
Krzysztof

[PATCH 2/2] arm64: dts: freescale: add i.MX937 FRDM board support

[Joy Zou]

The i.MX937 is a derivative of the i.MX952 SoC, so it reuses the
i.MX952 device tree as its base. Add imx937.dtsi based on imx952.dtsi
and imx937-frdm.dts based on imx952-frdm.dtsi to support the NXP
i.MX937 FRDM board.

Compared to the i.MX952, the i.MX937 drops the local dimming and ISP
blocks and runs its Cortex-A55 cores at a lower maximum frequency.

The PCAL6416 GPIO expander is at I2C address 0x21 on i.MX937 FRDM,
unlike 0x20 on i.MX952 FRDM, so disable the inherited node and add
the expander at 0x21.

Signed-off-by: Joy Zou <joy.zou@oss.nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx937-frdm.dts | 111 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx937.dtsi     |  12 +++
 3 files changed, 124 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a80cccf34eb5..5945969ada9c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -944,6 +944,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx937-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93w-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx937-frdm.dts b/arch/arm64/boot/dts/freescale/imx937-frdm.dts
new file mode 100644
index 000000000000..d6be48c81057
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx937-frdm.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+
+#include "imx937.dtsi"
+#include "imx952-frdm.dtsi"
+
+/ {
+	model = "NXP i.MX937 FRDM board";
+	compatible = "fsl,imx937-frdm", "fsl,imx937", "fsl,imx952";
+
+	can_mux: mux-controller-0 {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		#mux-state-cells = <1>;
+		/*
+		 * PCAL6416 (0x21) pin 4 selects the CAN/GPIO mux:
+		 * low selects CAN, high selects GPIO. With GPIO_ACTIVE_HIGH,
+		 * mux state 0 drives the pin low (CAN) and state 1 high (GPIO).
+		 */
+		mux-gpios = <&pcal6416_21 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_mux_pinctrl: pinctrl-gpiomux {
+		compatible = "pinctrl-multiplexer";
+
+		can_fun: can-grp {
+			mux-states = <&can_mux 0>;
+		};
+
+		gpio_fun: gpio-grp {
+			mux-states = <&can_mux 1>;
+		};
+	};
+};
+
+/* Select CAN on the shared CAN/GPIO mux when FlexCAN is enabled. */
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>, <&can_fun>;
+};
+
+/*
+ * The CAN transceiver silent-mode line is on the 0x21 PCAL6416 on
+ * i.MX937 FRDM (the inherited 0x20 expander is disabled below).
+ */
+&flexcan2_phy {
+	silent-gpios = <&pcal6416_21 6 GPIO_ACTIVE_HIGH>;
+};
+
+&flexcan3 {
+	pinctrl-0 = <&pinctrl_flexcan3>, <&can_fun>;
+};
+
+&flexcan3_phy {
+	silent-gpios = <&pcal6416_21 6 GPIO_ACTIVE_HIGH>;
+};
+
+&lpi2c2 {
+	pcal6416_21: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6416>;
+		pinctrl-names = "default";
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+/*
+ * The PCAL6416 GPIO expander is at address 0x21 on i.MX937 FRDM,
+ * unlike 0x20 on i.MX952 FRDM. Disable the inherited node.
+ */
+&pcal6416 {
+	status = "disabled";
+};
+
+/*
+ * The 0x20 PCAL6416 inherited from imx952-frdm.dtsi is disabled above;
+ * re-point every consumer to the 0x21 expander (pcal6416_21).
+ */
+&reg_ext_3v3 {
+	gpio = <&pcal6416_21 13 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_ext_5v {
+	gpio = <&pcal6416_21 12 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_m2_pwr {
+	gpio = <&pcal6416_21 11 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_usb_vbus {
+	gpio = <&pcal6416_21 15 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_usdhc3_vmmc {
+	gpio = <&pcal6416_21 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc3_pwrseq {
+	reset-gpios = <&pcal6416_21 8 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx937.dtsi b/arch/arm64/boot/dts/freescale/imx937.dtsi
new file mode 100644
index 000000000000..7912a9c282d8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx937.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+#include "imx952.dtsi"
+
+&gpu_opp_table {
+	opp-1000000000 {
+		status = "disabled";
+	};
+};

-- 
2.34.1

Re: [PATCH 2/2] arm64: dts: freescale: add i.MX937 FRDM board support

[Joseph Guo (OSS)]

On 10/19/2026 7:10 PM, Joy Zou wrote:
> The i.MX937 is a derivative of the i.MX952 SoC, so it reuses the
> i.MX952 device tree as its base. Add imx937.dtsi based on imx952.dtsi
> and imx937-frdm.dts based on imx952-frdm.dtsi to support the NXP
> i.MX937 FRDM board.
> 
> Compared to the i.MX952, the i.MX937 drops the local dimming and ISP
> blocks and runs its Cortex-A55 cores at a lower maximum frequency.
> 
> The PCAL6416 GPIO expander is at I2C address 0x21 on i.MX937 FRDM,
> unlike 0x20 on i.MX952 FRDM, so disable the inherited node and add
> the expander at 0x21.
> 
> Signed-off-by: Joy Zou <joy.zou@oss.nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  arch/arm64/boot/dts/freescale/imx937-frdm.dts | 111 ++++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx937.dtsi     |  12 +++
>  3 files changed, 124 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index a80cccf34eb5..5945969ada9c 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -944,6 +944,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-lvds-tm070jvhg33.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx937-frdm.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93w-frdm.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx937-frdm.dts b/arch/arm64/boot/dts/freescale/imx937-frdm.dts
> new file mode 100644
> index 000000000000..d6be48c81057
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx937-frdm.dts
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2026 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx937.dtsi"
> +#include "imx952-frdm.dtsi"
> +
> +/ {
> +	model = "NXP i.MX937 FRDM board";
> +	compatible = "fsl,imx937-frdm", "fsl,imx937", "fsl,imx952";
> +
> +	can_mux: mux-controller-0 {
> +		compatible = "gpio-mux";
> +		#mux-control-cells = <0>;
> +		#mux-state-cells = <1>;
> +		/*
> +		 * PCAL6416 (0x21) pin 4 selects the CAN/GPIO mux:
> +		 * low selects CAN, high selects GPIO. With GPIO_ACTIVE_HIGH,
> +		 * mux state 0 drives the pin low (CAN) and state 1 high (GPIO).
> +		 */
> +		mux-gpios = <&pcal6416_21 4 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	can_mux_pinctrl: pinctrl-gpiomux {
> +		compatible = "pinctrl-multiplexer";
> +
> +		can_fun: can-grp {
> +			mux-states = <&can_mux 0>;
> +		};
> +
> +		gpio_fun: gpio-grp {
> +			mux-states = <&can_mux 1>;
> +		};
> +	};
> +};

Hi Joy, 

This can mux is also compatible for i.MX952 FRDM. Can you please add it into imx952-frdm.dtsi instead?

Then new pinctrl for flexcan2/3 can dropped here too.

Regards,
Joseph
> +
> +/* Select CAN on the shared CAN/GPIO mux when FlexCAN is enabled. */
> +&flexcan2 {
> +	pinctrl-0 = <&pinctrl_flexcan2>, <&can_fun>;
> +};
> +
> +/*
> + * The CAN transceiver silent-mode line is on the 0x21 PCAL6416 on
> + * i.MX937 FRDM (the inherited 0x20 expander is disabled below).
> + */
> +&flexcan2_phy {
> +	silent-gpios = <&pcal6416_21 6 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&flexcan3 {
> +	pinctrl-0 = <&pinctrl_flexcan3>, <&can_fun>;
> +};
> +
> +&flexcan3_phy {
> +	silent-gpios = <&pcal6416_21 6 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&lpi2c2 {
> +	pcal6416_21: gpio@21 {
> +		compatible = "nxp,pcal6416";
> +		reg = <0x21>;
> +		#interrupt-cells = <2>;
> +		interrupt-controller;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		pinctrl-0 = <&pinctrl_pcal6416>;
> +		pinctrl-names = "default";
> +		vcc-supply = <&reg_3p3v>;
> +	};
> +};
> +
> +/*
> + * The PCAL6416 GPIO expander is at address 0x21 on i.MX937 FRDM,
> + * unlike 0x20 on i.MX952 FRDM. Disable the inherited node.
> + */
> +&pcal6416 {
> +	status = "disabled";
> +};
> +
> +/*
> + * The 0x20 PCAL6416 inherited from imx952-frdm.dtsi is disabled above;
> + * re-point every consumer to the 0x21 expander (pcal6416_21).
> + */
> +&reg_ext_3v3 {
> +	gpio = <&pcal6416_21 13 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&reg_ext_5v {
> +	gpio = <&pcal6416_21 12 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&reg_m2_pwr {
> +	gpio = <&pcal6416_21 11 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&reg_usb_vbus {
> +	gpio = <&pcal6416_21 15 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&reg_usdhc3_vmmc {
> +	gpio = <&pcal6416_21 9 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usdhc3_pwrseq {
> +	reset-gpios = <&pcal6416_21 8 GPIO_ACTIVE_LOW>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx937.dtsi b/arch/arm64/boot/dts/freescale/imx937.dtsi
> new file mode 100644
> index 000000000000..7912a9c282d8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx937.dtsi
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright 2026 NXP
> + */
> +
> +#include "imx952.dtsi"
> +
> +&gpu_opp_table {
> +	opp-1000000000 {
> +		status = "disabled";
> +	};
> +};
>