Re: [PATCH 2/3] ARM: dts: exynos: add simple battery to p4note

[Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>]

On 02/02/2022 17:34, Martin Jücker wrote:
> Add a simple battery node to the p4note device tree to set the missing
> values for the charger to work properly.
> 
> Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
> ---
>  arch/arm/boot/dts/exynos4412-p4note.dtsi | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> index 63459db653ea..fcd75cceb877 100644
> --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> @@ -115,6 +115,17 @@ wlan_pwrseq: sdhci3-pwrseq {
>  		clock-names = "ext_clock";
>  	};
>  
> +	battery_cell: battery-cell {
> +		compatible = "simple-battery";
> +		device-chemistry = "lithium-ion";
> +		constant-charge-current-max-microamp = <2200000>;
> +		precharge-current-microamp = <250000>;
> +		charge-term-current-microamp = <250000>;
> +		constant-charge-voltage-max-microvolt = <4200000>;
> +
> +		power-supplies = <&power_supply>;
> +	};
> +
>  	i2c-gpio-1 {
>  		compatible = "i2c-gpio";
>  		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> @@ -193,7 +204,7 @@ i2c-gpio-4 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		charger@6 {
> +		power_supply: charger@6 {

Squash this change with the previous patch. No need to add a line and
immediately change it in next patch.

>  			compatible = "summit,smb347";
>  			reg = <0x6>;
>  			summit,enable-usb-charging;
> @@ -201,6 +212,8 @@ charger@6 {
>  			summit,fast-voltage-threshold-microvolt = <2600000>;
>  			summit,chip-temperature-threshold-celsius = <130>;
>  			summit,usb-current-limit-microamp = <1800000>;
> +
> +			monitored-battery = <&battery_cell>;
>  		};
>  	};
>  


Best regards,
Krzysztof