mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* RE: [Bug 471] New: Root on software raid don't boot on new 2.5 ke rnel since after 2.5.45
@ 2003-03-19 13:50 Cress, Andrew R
  2003-03-19 15:07 ` Martin J. Bligh
  0 siblings, 1 reply; 2+ messages in thread
From: Cress, Andrew R @ 2003-03-19 13:50 UTC (permalink / raw)
  To: 'Helge Hafting', Martin J. Bligh; +Cc: linux-kernel

Martin,

You didn't list your kernel configuration.
Make sure you have CONFIG_BLK_DEV_MD=y (not =m) for root mirroring.
This is easy to forget, since the default is =m.

The others should be able to be modules, however you know that 
the module interface is radically changed in 2.5.45 and beyond,
so trying it with the other scsi & raid modules compiled in would 
be a good test.

Andy

-----Original Message-----
From: Helge Hafting [mailto:helgehaf@aitel.hist.no] 
Sent: Wednesday, March 19, 2003 5:15 AM
To: Martin J. Bligh
Cc: linux-kernel
Subject: Re: [Bug 471] New: Root on software raid don't boot on new 2.5
kernel since after 2.5.45


Martin J. Bligh wrote:
> http://bugme.osdl.org/show_bug.cgi?id=471
> 
>            Summary: Root on software raid don't boot on new 2.5 kernel
since
>                     after 2.5.45

Root on raid-1 works fine for me, with and without devfs.  My kernel has
no module support, everything is compiled in.  I don't use initrd.
I have used root-raid with every 2.5 kernel except for a few that had
raid bugs. (Affecting all raid, the root weren't special.)

Until recently the root raid always did an unclean shutdown, but this didn't
cause other trouble than a bootup resync.



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-03-19 15:13 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-19 13:50 [Bug 471] New: Root on software raid don't boot on new 2.5 ke rnel since after 2.5.45 Cress, Andrew R
2003-03-19 15:07 ` Martin J. Bligh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®