* [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
@ 2024-04-30 13:15 Beleswar Padhi
2024-05-14 8:14 ` Bhavya Kapoor
2024-06-14 5:15 ` Vignesh Raghavendra
0 siblings, 2 replies; 3+ messages in thread
From: Beleswar Padhi @ 2024-04-30 13:15 UTC (permalink / raw)
To: nm
Cc: vigneshr, kristo, robh, krzk+dt, conor+dt, linux-arm-kernel,
devicetree, linux-kernel, b-kapoor, u-kumar1
CAN instance 0 in the mcu domain is brought on the J721E-SK board
through header J1. Thus, add its respective transceiver 1 dt node to add
support for this CAN instance.
CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
board through headers J5, J6 and J2 respectively. Thus, add their
respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
instances.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3
v4: Changelog:
1) Made transceiver ID and can-phy ID in sync for all applicable nodes
Link to v3:
https://lore.kernel.org/all/20240412112025.201639-1-b-padhi@ti.com/
v3: Changelog:
1) Updated board name in capital letters in commit message description
2) Updated test logs to include communication between all applicable CAN
instances
Link to v2:
https://lore.kernel.org/linux-arm-kernel/20240325103405.182692-1-b-padhi@ti.com/
v2: Changelog:
1) Re-ordered status = "okay" property to the end of all applicable dt
nodes following kernel documentation
Link to v1:
https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@ti.com/
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 0c4575ad8d7c..02e6c49b7090 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
<3300000 0x1>;
};
+ transceiver1: can-phy1 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+ standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver2: can-phy2 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver3: can-phy3 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy4 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_gpio_pins_default>;
+ standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
+ };
+
dp_pwr_3v3: fixedregulator-dp-prw {
compatible = "regulator-fixed";
regulator-name = "dp-pwr";
@@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */
>;
};
+ main_mcan0_pins_default: main-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+ J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+ >;
+ };
+
+ main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
+ >;
+ };
+
+ main_mcan5_pins_default: main-mcan5-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
+ J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
+ >;
+ };
+
+ main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
+ >;
+ };
+
+ main_mcan9_pins_default: main-mcan9-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
+ J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
+ >;
+ };
+
+ main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
+ >;
+ };
+
dp0_pins_default: dp0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
>;
};
+ mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+ J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+ >;
+ };
+
+ mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
+ >;
+ };
+
/* Reset for M.2 M Key slot on PCIe1 */
mkey_reset_pins_default: mkey-reset-pns-default-pins {
pinctrl-single,pins = <
@@ -1108,6 +1196,34 @@ &pcie1_rc {
num-lanes = <2>;
};
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mcan0_pins_default>;
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&main_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan0_pins_default>;
+ phys = <&transceiver2>;
+ status = "okay";
+};
+
+&main_mcan5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan5_pins_default>;
+ phys = <&transceiver3>;
+ status = "okay";
+};
+
+&main_mcan9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mcan9_pins_default>;
+ phys = <&transceiver4>;
+ status = "okay";
+};
+
&ufs_wrapper {
status = "disabled";
};
--
2.34.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
2024-04-30 13:15 [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances Beleswar Padhi
@ 2024-05-14 8:14 ` Bhavya Kapoor
2024-06-14 5:15 ` Vignesh Raghavendra
1 sibling, 0 replies; 3+ messages in thread
From: Bhavya Kapoor @ 2024-05-14 8:14 UTC (permalink / raw)
To: Beleswar Padhi, nm
Cc: vigneshr, kristo, robh, krzk+dt, conor+dt, linux-arm-kernel,
devicetree, linux-kernel, u-kumar1
LGTM :)
On 30/04/24 6:45 pm, Beleswar Padhi wrote:
> CAN instance 0 in the mcu domain is brought on the J721E-SK board
> through header J1. Thus, add its respective transceiver 1 dt node to add
> support for this CAN instance.
>
> CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
> board through headers J5, J6 and J2 respectively. Thus, add their
> respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
> instances.
>
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
> ---
> Test logs: https://gist.github.com/3V3RYONE/2144fa883bf3a390981d25572971fcf3
>
> v4: Changelog:
> 1) Made transceiver ID and can-phy ID in sync for all applicable nodes
>
> Link to v3:
> https://lore.kernel.org/all/20240412112025.201639-1-b-padhi@ti.com/
>
> v3: Changelog:
> 1) Updated board name in capital letters in commit message description
> 2) Updated test logs to include communication between all applicable CAN
> instances
>
> Link to v2:
> https://lore.kernel.org/linux-arm-kernel/20240325103405.182692-1-b-padhi@ti.com/
>
> v2: Changelog:
> 1) Re-ordered status = "okay" property to the end of all applicable dt
> nodes following kernel documentation
>
> Link to v1:
> https://lore.kernel.org/linux-arm-kernel/20240315124728.490331-1-b-padhi@ti.com/
>
> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 116 +++++++++++++++++++++++++
> 1 file changed, 116 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> index 0c4575ad8d7c..02e6c49b7090 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> @@ -210,6 +210,42 @@ vdd_sd_dv_alt: gpio-regulator-tps659411 {
> <3300000 0x1>;
> };
>
> + transceiver1: can-phy1 {
> + compatible = "ti,tcan1042";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
> + standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + transceiver2: can-phy2 {
> + compatible = "ti,tcan1042";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan0_gpio_pins_default>;
> + standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
> + };
> +
> + transceiver3: can-phy3 {
> + compatible = "ti,tcan1042";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan5_gpio_pins_default>;
> + standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
> + };
> +
> + transceiver4: can-phy4 {
> + compatible = "ti,tcan1042";
> + #phy-cells = <0>;
> + max-bitrate = <5000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan9_gpio_pins_default>;
> + standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
> + };
> +
> dp_pwr_3v3: fixedregulator-dp-prw {
> compatible = "regulator-fixed";
> regulator-name = "dp-pwr";
> @@ -367,6 +403,45 @@ J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */
> >;
> };
>
> + main_mcan0_pins_default: main-mcan0-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
> + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
> + >;
> + };
> +
> + main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
> + >;
> + };
> +
> + main_mcan5_pins_default: main-mcan5-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
> + J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
> + >;
> + };
> +
> + main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
> + >;
> + };
> +
> + main_mcan9_pins_default: main-mcan9-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
> + J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
> + >;
> + };
> +
> + main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins {
> + pinctrl-single,pins = <
> + J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
> + >;
> + };
> +
> dp0_pins_default: dp0-default-pins {
> pinctrl-single,pins = <
> J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
> @@ -555,6 +630,19 @@ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
> >;
> };
>
> + mcu_mcan0_pins_default: mcu-mcan0-default-pins {
> + pinctrl-single,pins = <
> + J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
> + J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
> + >;
> + };
> +
> + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
> + pinctrl-single,pins = <
> + J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
> + >;
> + };
> +
> /* Reset for M.2 M Key slot on PCIe1 */
> mkey_reset_pins_default: mkey-reset-pns-default-pins {
> pinctrl-single,pins = <
> @@ -1108,6 +1196,34 @@ &pcie1_rc {
> num-lanes = <2>;
> };
>
> +&mcu_mcan0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_mcan0_pins_default>;
> + phys = <&transceiver1>;
> + status = "okay";
> +};
> +
> +&main_mcan0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan0_pins_default>;
> + phys = <&transceiver2>;
> + status = "okay";
> +};
> +
> +&main_mcan5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan5_pins_default>;
> + phys = <&transceiver3>;
> + status = "okay";
> +};
> +
> +&main_mcan9 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&main_mcan9_pins_default>;
> + phys = <&transceiver4>;
> + status = "okay";
> +};
> +
> &ufs_wrapper {
> status = "disabled";
> };
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
2024-04-30 13:15 [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances Beleswar Padhi
2024-05-14 8:14 ` Bhavya Kapoor
@ 2024-06-14 5:15 ` Vignesh Raghavendra
1 sibling, 0 replies; 3+ messages in thread
From: Vignesh Raghavendra @ 2024-06-14 5:15 UTC (permalink / raw)
To: nm, Beleswar Padhi
Cc: Vignesh Raghavendra, kristo, robh, krzk+dt, conor+dt,
linux-arm-kernel, devicetree, linux-kernel, b-kapoor, u-kumar1
Hi Beleswar Padhi,
On Tue, 30 Apr 2024 18:45:12 +0530, Beleswar Padhi wrote:
> CAN instance 0 in the mcu domain is brought on the J721E-SK board
> through header J1. Thus, add its respective transceiver 1 dt node to add
> support for this CAN instance.
>
> CAN instances 0, 5 and 9 in the main domain are brought on the J721E-SK
> board through headers J5, J6 and J2 respectively. Thus, add their
> respective transceivers 2, 3 and 4 dt nodes to add support for these CAN
> instances.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances
commit: 021d3d5f0741e5393a7a110ac909fc746b1e0a4d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-06-14 5:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-30 13:15 [PATCH v4] arm64: dts: ti: k3-j721e-sk: Add support for multiple CAN instances Beleswar Padhi
2024-05-14 8:14 ` Bhavya Kapoor
2024-06-14 5:15 ` Vignesh Raghavendra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®