From: Jessica Zhang <quic_jesszhan@quicinc.com>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>,
<linux-arm-msm@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/4] drm/msm/dsi: Adjust pclk rate for compression
Date: Fri, 5 May 2023 14:49:08 -0700 [thread overview]
Message-ID: <79b468f5-8f2e-175b-5bce-1b3ea5127628@quicinc.com> (raw)
In-Reply-To: <20230405-add-dsc-support-v2-1-1072c70e9786@quicinc.com>
On 5/5/2023 2:23 PM, Jessica Zhang wrote:
> Adjust the pclk rate to divide hdisplay by the compression ratio when DSC
> is enabled.
>
> Changes in v2:
> - Adjusted pclk_rate math to divide only the hdisplay value by
> compression ratio
>
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
> drivers/gpu/drm/msm/dsi/dsi_host.c | 17 +++++++++++++----
> 1 file changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 43a5ec33eee8..0e5778e8091f 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -561,7 +561,8 @@ void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
> clk_disable_unprepare(msm_host->byte_clk);
> }
>
> -static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool is_bonded_dsi)
> +static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode,
> + struct drm_dsc_config *dsc, bool is_bonded_dsi)
> {
> unsigned long pclk_rate;
>
> @@ -576,6 +577,14 @@ static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool
> if (is_bonded_dsi)
> pclk_rate /= 2;
>
> + /* If DSC is enabled, divide hdisplay by compression ratio */
> + if (dsc) {
> + int new_hdisplay = DIV_ROUND_UP(mode->hdisplay * msm_dsc_get_bpp_int(dsc),
> + dsc->bits_per_component * 3);
> + int fps = DIV_ROUND_UP(pclk_rate, mode->htotal * mode->vtotal);
Should've used drm_mode_vrefresh() here... Will spin a v3 with that
change (along with any additional comments)
> + pclk_rate = (new_hdisplay + (mode->htotal - mode->hdisplay)) * mode->vtotal * fps;
> + }
> +
> return pclk_rate;
> }
>
> @@ -585,7 +594,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
> struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> u8 lanes = msm_host->lanes;
> u32 bpp = dsi_get_bpp(msm_host->format);
> - unsigned long pclk_rate = dsi_get_pclk_rate(mode, is_bonded_dsi);
> + unsigned long pclk_rate = dsi_get_pclk_rate(mode, msm_host->dsc, is_bonded_dsi);
> u64 pclk_bpp = (u64)pclk_rate * bpp;
>
> if (lanes == 0) {
> @@ -604,7 +613,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>
> static void dsi_calc_pclk(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> {
> - msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi);
> + msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi);
> msm_host->byte_clk_rate = dsi_byte_clk_get_rate(&msm_host->base, is_bonded_dsi,
> msm_host->mode);
>
> @@ -634,7 +643,7 @@ int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>
> dsi_calc_pclk(msm_host, is_bonded_dsi);
>
> - pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi) * bpp;
> + pclk_bpp = (u64)dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi) * bpp;
> do_div(pclk_bpp, 8);
> msm_host->src_clk_rate = pclk_bpp;
>
>
> --
> 2.40.1
>
next prev parent reply other threads:[~2023-05-05 21:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-05 21:23 [PATCH v2 0/4] Add DSC v1.2 Support for DSI Jessica Zhang
2023-05-05 21:23 ` [PATCH v2 1/4] drm/msm/dsi: Adjust pclk rate for compression Jessica Zhang
2023-05-05 21:49 ` Jessica Zhang [this message]
2023-05-08 21:56 ` Marijn Suijten
2023-05-19 19:04 ` Jessica Zhang
2023-05-19 21:20 ` Marijn Suijten
2023-05-05 21:23 ` [PATCH v2 2/4] drm/msm/dsi: Fix compressed word count calculation Jessica Zhang
2023-05-05 21:23 ` [PATCH v2 3/4] drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag Jessica Zhang
2023-05-07 16:00 ` Marijn Suijten
2023-05-07 19:21 ` Dmitry Baryshkov
2023-05-08 21:47 ` Marijn Suijten
2023-05-08 8:36 ` Konrad Dybcio
2023-05-08 21:53 ` Marijn Suijten
2023-05-08 21:46 ` Jessica Zhang
2023-05-08 21:50 ` Marijn Suijten
2023-05-08 23:08 ` Dmitry Baryshkov
2023-05-09 0:28 ` Abhinav Kumar
2023-05-09 0:48 ` Dmitry Baryshkov
2023-05-09 6:59 ` Marijn Suijten
2023-05-09 11:12 ` Dmitry Baryshkov
2023-05-05 21:23 ` [PATCH v2 4/4] drm/msm/dpu: Set DATA_COMPRESS for command mode Jessica Zhang
2023-05-07 16:06 ` Marijn Suijten
2023-05-08 23:17 ` Jessica Zhang
2023-05-09 0:00 ` [Freedreno] " Jessica Zhang
2023-05-09 6:49 ` Marijn Suijten
2023-05-09 6:46 ` Marijn Suijten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79b468f5-8f2e-175b-5bce-1b3ea5127628@quicinc.com \
--to=quic_jesszhan@quicinc.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®