Re: [PATCH v16 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

[Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>]

On 3/26/2024 1:15 AM, Johan Hovold wrote:

> Just change the logic in dwc3_qcom_find_num_ports() so that it returns 1
> if "dp_hs_phy_1" is missing, and otherwise you determine the number of
> ports by iterating from 2 to DWC3_MAX_PORTS - 1.

Hi Johan,

I made this change and it works. Removed any return value check for the 
find_num_ports call as it can return only 1/2/3/4 now.

---
     irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
         if (irq > 0)
                 return 1;

         irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
         if (irq > 0)
                 return 1;

         irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
         if (irq <= 0)
                 return 1;

         for (port_index = 1; port_index < DWC3_MAX_PORTS - 1; 
port_index++) {
                 sprintf(irq_name, "dp_hs_phy_%d", port_index + 1);

                 irq = platform_get_irq_byname_optional(pdev, irq_name);
                 if (irq <= 0)
                         return port_index;
         }

         return DWC3_MAX_PORTS;

---

Let me know if this is fine and I can push out v17.

Regards,
Krishna,