From: <Ryan.Wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>
Cc: <robh@kernel.org>, <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<varshini.rajendran@microchip.com>
Subject: [PATCH v2 20/32] clk: at91: sam9x60: switch to parent_hw and parent_data
Date: Tue, 24 Jun 2025 08:08:17 -0700 [thread overview]
Message-ID: <7b54ed71ce0cc8134c77b6f5914bf0e95ffa4d77.1750182562.git.Ryan.Wanner@microchip.com> (raw)
In-Reply-To: <cover.1750182562.git.Ryan.Wanner@microchip.com>
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Switch SAM9X60 clocks to use modern parent_hw and parent_data.
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
drivers/clk/at91/sam9x60.c | 117 ++++++++++++++++++-------------------
1 file changed, 56 insertions(+), 61 deletions(-)
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index d959b30e1352..b2e86e600a9f 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -79,9 +79,9 @@ static const struct clk_pcr_layout sam9x60_pcr_layout = {
.pid_mask = GENMASK(6, 0),
};
-static const struct {
+static struct {
char *n;
- char *p;
+ struct clk_hw *parent_hw;
unsigned long flags;
u8 id;
} sam9x60_systemck[] = {
@@ -89,11 +89,11 @@ static const struct {
* ddrck feeds DDR controller and is enabled by bootloader thus we need
* to keep it enabled in case there is no Linux consumer for it.
*/
- { .n = "ddrck", .p = "masterck_div", .id = 2, .flags = CLK_IS_CRITICAL },
- { .n = "uhpck", .p = "usbck", .id = 6 },
- { .n = "pck0", .p = "prog0", .id = 8 },
- { .n = "pck1", .p = "prog1", .id = 9 },
- { .n = "qspick", .p = "masterck_div", .id = 19 },
+ { .n = "ddrck", .id = 2, .flags = CLK_IS_CRITICAL },
+ { .n = "uhpck", .id = 6 },
+ { .n = "pck0", .id = 8 },
+ { .n = "pck1", .id = 9 },
+ { .n = "qspick", .id = 19 },
};
static const struct {
@@ -184,32 +184,17 @@ static const struct {
static void __init sam9x60_pmc_setup(struct device_node *np)
{
+ const char *td_slck_name = "td_slck", *md_slck_name = "md_slck";
+ u8 td_slck_index = 0, md_slck_index = 1, main_xtal_index = 2;
+ struct clk_hw *hw, *main_rc_hw, *main_osc_hw;
+ const char *main_xtal_name = "main_xtal";
struct clk_range range = CLK_RANGE(0, 0);
- const char *td_slck_name, *md_slck_name, *mainxtal_name;
+ struct clk_parent_data parent_data[6];
struct pmc_data *sam9x60_pmc;
- const char *parent_names[6];
- struct clk_hw *main_osc_hw;
+ struct clk_hw *usbck_hw;
struct regmap *regmap;
- struct clk_hw *hw;
int i;
- i = of_property_match_string(np, "clock-names", "td_slck");
- if (i < 0)
- return;
-
- td_slck_name = of_clk_get_parent_name(np, i);
-
- i = of_property_match_string(np, "clock-names", "md_slck");
- if (i < 0)
- return;
-
- md_slck_name = of_clk_get_parent_name(np, i);
-
- i = of_property_match_string(np, "clock-names", "main_xtal");
- if (i < 0)
- return;
- mainxtal_name = of_clk_get_parent_name(np, i);
-
regmap = device_node_to_regmap(np);
if (IS_ERR(regmap))
return;
@@ -221,26 +206,28 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
if (!sam9x60_pmc)
return;
- hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
- 50000000);
- if (IS_ERR(hw))
+ main_rc_hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 50000000);
+ if (IS_ERR(main_rc_hw))
goto err_free;
- hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, NULL, 0);
+ main_osc_hw = at91_clk_register_main_osc(regmap, "main_osc", NULL,
+ &AT91_CLK_PD_NAME(main_xtal_name, main_xtal_index),
+ 0);
if (IS_ERR(hw))
goto err_free;
- main_osc_hw = hw;
- parent_names[0] = "main_rc_osc";
- parent_names[1] = "main_osc";
- hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, NULL, 2);
+ parent_data[0] = AT91_CLK_PD_HW(main_rc_hw);
+ parent_data[1] = AT91_CLK_PD_HW(main_osc_hw);
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", NULL, parent_data, 2);
if (IS_ERR(hw))
goto err_free;
sam9x60_pmc->chws[PMC_MAIN] = hw;
hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "pllack_fracck",
- "mainck", sam9x60_pmc->chws[PMC_MAIN],
+ &AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MAIN]),
+ clk_hw_get_rate(sam9x60_pmc->chws[PMC_MAIN]),
0, &plla_characteristics,
&pll_frac_layout,
/*
@@ -253,7 +240,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
goto err_free;
hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "pllack_divck",
- "pllack_fracck", NULL, 0, &plla_characteristics,
+ NULL, hw, 0, &plla_characteristics,
&pll_div_layout,
/*
* This feeds CPU. It should not
@@ -266,14 +253,15 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->chws[PMC_PLLACK] = hw;
hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "upllck_fracck",
- "main_osc", main_osc_hw, 1,
- &upll_characteristics,
+ &AT91_CLK_PD_HW(main_osc_hw),
+ clk_hw_get_rate(main_osc_hw),
+ 1, &upll_characteristics,
&pll_frac_layout, CLK_SET_RATE_GATE);
if (IS_ERR(hw))
goto err_free;
hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "upllck_divck",
- "upllck_fracck", NULL, 1, &upll_characteristics,
+ NULL, hw, 1, &upll_characteristics,
&pll_div_layout,
CLK_SET_RATE_GATE |
CLK_SET_PARENT_GATE |
@@ -283,17 +271,17 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->chws[PMC_UTMI] = hw;
- parent_names[0] = md_slck_name;
- parent_names[1] = "mainck";
- parent_names[2] = "pllack_divck";
+ parent_data[0] = AT91_CLK_PD_NAME(md_slck_name, md_slck_index);
+ parent_data[1] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MAIN]);
+ parent_data[2] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_PLLACK]);
hw = at91_clk_register_master_pres(regmap, "masterck_pres", 3,
- parent_names, NULL, &sam9x60_master_layout,
+ NULL, parent_data, &sam9x60_master_layout,
&mck_characteristics, &mck_lock);
if (IS_ERR(hw))
goto err_free;
hw = at91_clk_register_master_div(regmap, "masterck_div",
- "masterck_pres", NULL, &sam9x60_master_layout,
+ NULL, &AT91_CLK_PD_HW(hw), &sam9x60_master_layout,
&mck_characteristics, &mck_lock,
CLK_SET_RATE_GATE, 0);
if (IS_ERR(hw))
@@ -301,26 +289,26 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->chws[PMC_MCK] = hw;
- parent_names[0] = "pllack_divck";
- parent_names[1] = "upllck_divck";
- parent_names[2] = "main_osc";
- hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, NULL, 3);
- if (IS_ERR(hw))
+ parent_data[0] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_PLLACK]);
+ parent_data[1] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_UTMI]);
+ parent_data[2] = AT91_CLK_PD_HW(main_osc_hw);
+ usbck_hw = sam9x60_clk_register_usb(regmap, "usbck", NULL, parent_data, 3);
+ if (IS_ERR(usbck_hw))
goto err_free;
- parent_names[0] = md_slck_name;
- parent_names[1] = td_slck_name;
- parent_names[2] = "mainck";
- parent_names[3] = "masterck_div";
- parent_names[4] = "pllack_divck";
- parent_names[5] = "upllck_divck";
+ parent_data[0] = AT91_CLK_PD_NAME(md_slck_name, md_slck_index);
+ parent_data[1] = AT91_CLK_PD_NAME(td_slck_name, td_slck_index);
+ parent_data[2] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MAIN]);
+ parent_data[3] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MCK]);
+ parent_data[4] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_PLLACK]);
+ parent_data[5] = AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_UTMI]);
for (i = 0; i < 2; i++) {
char name[6];
snprintf(name, sizeof(name), "prog%d", i);
hw = at91_clk_register_programmable(regmap, name,
- parent_names, NULL, 6, i,
+ NULL, parent_data, 6, i,
&sam9x60_programmable_layout,
NULL);
if (IS_ERR(hw))
@@ -329,9 +317,15 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->pchws[i] = hw;
}
+ /* Set systemck parent hws. */
+ sam9x60_systemck[0].parent_hw = sam9x60_pmc->chws[PMC_MCK];
+ sam9x60_systemck[1].parent_hw = usbck_hw;
+ sam9x60_systemck[2].parent_hw = sam9x60_pmc->pchws[0];
+ sam9x60_systemck[3].parent_hw = sam9x60_pmc->pchws[1];
+ sam9x60_systemck[4].parent_hw = sam9x60_pmc->chws[PMC_MCK];
for (i = 0; i < ARRAY_SIZE(sam9x60_systemck); i++) {
hw = at91_clk_register_system(regmap, sam9x60_systemck[i].n,
- sam9x60_systemck[i].p, NULL,
+ NULL, &AT91_CLK_PD_HW(sam9x60_systemck[i].parent_hw),
sam9x60_systemck[i].id,
sam9x60_systemck[i].flags);
if (IS_ERR(hw))
@@ -344,7 +338,8 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
&sam9x60_pcr_layout,
sam9x60_periphck[i].n,
- "masterck_div", NULL,
+ NULL,
+ &AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MCK]),
sam9x60_periphck[i].id,
&range, INT_MIN,
sam9x60_periphck[i].flags);
@@ -358,7 +353,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
&sam9x60_pcr_layout,
sam9x60_gck[i].n,
- parent_names, NULL, NULL, 6,
+ NULL, parent_data, NULL, 6,
sam9x60_gck[i].id,
&sam9x60_gck[i].r, INT_MIN);
if (IS_ERR(hw))
--
2.43.0
next prev parent reply other threads:[~2025-06-24 15:09 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-24 15:07 [PATCH v2 00/32] clk: at91: add support for parent_data and Ryan.Wanner
2025-06-24 15:07 ` [PATCH v2 01/32] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-06-24 15:07 ` [PATCH v2 02/32] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 03/32] clk: at91: clk-sam9x60-pll: use clk_parent_data Ryan.Wanner
2025-07-07 13:21 ` Claudiu Beznea
2025-07-07 15:24 ` Ryan Wanner
2025-07-08 10:05 ` Claudiu Beznea
2025-06-24 15:08 ` [PATCH v2 04/32] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 05/32] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 06/32] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 07/32] clk: at91: clk-master: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 08/32] clk: at91: clk-programmable: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 09/32] clk: at91: clk-generated: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 10/32] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 11/32] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 12/32] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 13/32] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 14/32] clk: at91: clk-plldiv: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 15/32] clk: at91: clk-h32mx: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 16/32] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 17/32] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 18/32] clk: at91: clk-slow: add support for parent_hw Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 19/32] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-06-24 15:08 ` Ryan.Wanner [this message]
2025-06-24 15:08 ` [PATCH v2 21/32] clk: at91: sama5d2: " Ryan.Wanner
2025-07-07 13:21 ` Claudiu Beznea
2025-06-24 15:08 ` [PATCH v2 22/32] clk: at91: sama5d3: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 23/32] clk: at91: sama5d4: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 24/32] clk: at91: at91sam9x5: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 25/32] clk: at91: at91rm9200: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 26/32] clk: at91: at91sam9260: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 27/32] clk: at91: at91sam9g45: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 28/32] clk: at91: at91sam9n12: " Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 29/32] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 30/32] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 31/32] clk: at91: sama7g5: switch to clk_parent_data Ryan.Wanner
2025-06-24 15:08 ` [PATCH v2 32/32] clk: at91: sama7d65: " Ryan.Wanner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7b54ed71ce0cc8134c77b6f5914bf0e95ffa4d77.1750182562.git.Ryan.Wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®