Re: [PATCH v4 10/10] media: subdev: Support non-routing subdevs in v4l2_subdev_s_stream_helper()

[Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>]

On 16/04/2024 16:28, Umang Jain wrote:
> Hi Tomi
> 
> On 16/04/24 4:13 pm, Tomi Valkeinen wrote:
>> Hi,
>>
>> On 16/04/2024 13:40, Tomi Valkeinen wrote:
>>> At the moment v4l2_subdev_s_stream_helper() only works for subdevices
>>> that support routing. As enable/disable_streams now also works for
>>> subdevices without routing, improve v4l2_subdev_s_stream_helper() to do
>>> the same.
>>
>> I forgot to mention, I have not tested this patch as I don't have a HW 
>> setup. And, of course, I now see that it has a bug. The BIT_ULL(1) 
>> should be BIT_ULL(0).
>>
>> Umang, can you try a fixed one on your side? If it works, I'll send a v5.
> 
> This doesn't work. Streaming fails as :
> 
> [  132.108845] rkisp1 32e10000.isp: streams 0xffff8000801fef88 already 
> enabled on imx283 1-001a:0
> [  133.140906] rkisp1 32e10000.isp: streams 0xffff8000801fef88 already 
> enabled on imx283 1-001a:0

Indeed, there's a bug in v4l2_subdev_collect_streams() too:

@@ -2108,8 +2108,8 @@ static void v4l2_subdev_collect_streams(struct v4l2_subdev *sd,
  {
         if (!(sd->flags & V4L2_SUBDEV_FL_STREAMS)) {
                 *found_streams = BIT_ULL(0);
-               if (sd->enabled_pads & BIT_ULL(pad))
-                       *enabled_streams = BIT_ULL(0);
+               *enabled_streams =
+                       (sd->enabled_pads & BIT_ULL(pad)) ? BIT_ULL(0) : 0;
                 return;
         }

  Tomi

> 
> With locally applied:
> 
> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c 
> b/drivers/media/v4l2-core/v4l2-subdev.c
> index 04d85b5f23f5..4684e4e1984c 100644
> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> @@ -2203,7 +2203,7 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev 
> *sd, u32 pad,
>          }
> 
>          if (enabled_streams) {
> -               dev_dbg(dev, "streams 0x%llx already enabled on %s:%u\n",
> +               dev_err(dev, "streams 0x%llx already enabled on %s:%u\n",
>                          enabled_streams, sd->entity.name, pad);
>                  ret = -EINVAL;
>                  goto done;
> @@ -2376,7 +2376,7 @@ int v4l2_subdev_s_stream_helper(struct v4l2_subdev 
> *sd, int enable)
>                   * For non-streams subdevices, there's a single 
> implicit stream
>                   * per pad.
>                   */
> -               source_mask = BIT_ULL(1);
> +               source_mask = BIT_ULL(0);
>          }
> 
>>
>>  Tomi
>>
>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>>> ---
>>>   drivers/media/v4l2-core/v4l2-subdev.c | 23 ++++++++++++++++-------
>>>   1 file changed, 16 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c 
>>> b/drivers/media/v4l2-core/v4l2-subdev.c
>>> index 1c6b305839a1..83ebcde54a34 100644
>>> --- a/drivers/media/v4l2-core/v4l2-subdev.c
>>> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
>>> @@ -2360,15 +2360,24 @@ int v4l2_subdev_s_stream_helper(struct 
>>> v4l2_subdev *sd, int enable)
>>>       if (WARN_ON(pad_index == -1))
>>>           return -EINVAL;
>>>   -    /*
>>> -     * As there's a single source pad, just collect all the source 
>>> streams.
>>> -     */
>>> -    state = v4l2_subdev_lock_and_get_active_state(sd);
>>> +    if (sd->flags & V4L2_SUBDEV_FL_STREAMS) {
>>> +        /*
>>> +         * As there's a single source pad, just collect all the source
>>> +         * streams.
>>> +         */
>>> +        state = v4l2_subdev_lock_and_get_active_state(sd);
>>>   -    for_each_active_route(&state->routing, route)
>>> -        source_mask |= BIT_ULL(route->source_stream);
>>> +        for_each_active_route(&state->routing, route)
>>> +            source_mask |= BIT_ULL(route->source_stream);
>>>   -    v4l2_subdev_unlock_state(state);
>>> +        v4l2_subdev_unlock_state(state);
>>> +    } else {
>>> +        /*
>>> +         * For non-streams subdevices, there's a single implicit stream
>>> +         * per pad.
>>> +         */
>>> +        source_mask = BIT_ULL(1);
>>> +    }
>>>         if (enable)
>>>           return v4l2_subdev_enable_streams(sd, pad_index, source_mask);
>>>
>>
>