From: Umang Jain <umang.jain@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Subject: Re: [PATCH v4 10/10] media: subdev: Support non-routing subdevs in v4l2_subdev_s_stream_helper()
Date: Tue, 16 Apr 2024 18:58:51 +0530 [thread overview]
Message-ID: <92279ce6-e410-40f2-bc6d-ad842aa9e106@ideasonboard.com> (raw)
In-Reply-To: <271933b0-7ac1-4fdf-b66a-0ed860a1ec8f@ideasonboard.com>
Hi Tomi
On 16/04/24 4:13 pm, Tomi Valkeinen wrote:
> Hi,
>
> On 16/04/2024 13:40, Tomi Valkeinen wrote:
>> At the moment v4l2_subdev_s_stream_helper() only works for subdevices
>> that support routing. As enable/disable_streams now also works for
>> subdevices without routing, improve v4l2_subdev_s_stream_helper() to do
>> the same.
>
> I forgot to mention, I have not tested this patch as I don't have a HW
> setup. And, of course, I now see that it has a bug. The BIT_ULL(1)
> should be BIT_ULL(0).
>
> Umang, can you try a fixed one on your side? If it works, I'll send a v5.
This doesn't work. Streaming fails as :
[ 132.108845] rkisp1 32e10000.isp: streams 0xffff8000801fef88 already
enabled on imx283 1-001a:0
[ 133.140906] rkisp1 32e10000.isp: streams 0xffff8000801fef88 already
enabled on imx283 1-001a:0
With locally applied:
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c
b/drivers/media/v4l2-core/v4l2-subdev.c
index 04d85b5f23f5..4684e4e1984c 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -2203,7 +2203,7 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev
*sd, u32 pad,
}
if (enabled_streams) {
- dev_dbg(dev, "streams 0x%llx already enabled on %s:%u\n",
+ dev_err(dev, "streams 0x%llx already enabled on %s:%u\n",
enabled_streams, sd->entity.name, pad);
ret = -EINVAL;
goto done;
@@ -2376,7 +2376,7 @@ int v4l2_subdev_s_stream_helper(struct v4l2_subdev
*sd, int enable)
* For non-streams subdevices, there's a single
implicit stream
* per pad.
*/
- source_mask = BIT_ULL(1);
+ source_mask = BIT_ULL(0);
}
>
> Tomi
>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>> ---
>> drivers/media/v4l2-core/v4l2-subdev.c | 23 ++++++++++++++++-------
>> 1 file changed, 16 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c
>> b/drivers/media/v4l2-core/v4l2-subdev.c
>> index 1c6b305839a1..83ebcde54a34 100644
>> --- a/drivers/media/v4l2-core/v4l2-subdev.c
>> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
>> @@ -2360,15 +2360,24 @@ int v4l2_subdev_s_stream_helper(struct
>> v4l2_subdev *sd, int enable)
>> if (WARN_ON(pad_index == -1))
>> return -EINVAL;
>> - /*
>> - * As there's a single source pad, just collect all the source
>> streams.
>> - */
>> - state = v4l2_subdev_lock_and_get_active_state(sd);
>> + if (sd->flags & V4L2_SUBDEV_FL_STREAMS) {
>> + /*
>> + * As there's a single source pad, just collect all the source
>> + * streams.
>> + */
>> + state = v4l2_subdev_lock_and_get_active_state(sd);
>> - for_each_active_route(&state->routing, route)
>> - source_mask |= BIT_ULL(route->source_stream);
>> + for_each_active_route(&state->routing, route)
>> + source_mask |= BIT_ULL(route->source_stream);
>> - v4l2_subdev_unlock_state(state);
>> + v4l2_subdev_unlock_state(state);
>> + } else {
>> + /*
>> + * For non-streams subdevices, there's a single implicit stream
>> + * per pad.
>> + */
>> + source_mask = BIT_ULL(1);
>> + }
>> if (enable)
>> return v4l2_subdev_enable_streams(sd, pad_index, source_mask);
>>
>
next prev parent reply other threads:[~2024-04-16 13:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-16 10:39 [PATCH v4 00/10] media: subdev: Improve stream enable/disable machinery Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 01/10] media: subdev: Add privacy led helpers Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 02/10] media: subdev: Use v4l2_subdev_has_op() in v4l2_subdev_enable/disable_streams() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 03/10] media: subdev: Add checks for subdev features Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 04/10] media: subdev: Fix use of sd->enabled_streams in call_s_stream() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 05/10] media: subdev: Improve v4l2_subdev_enable/disable_streams_fallback Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 06/10] media: subdev: Add v4l2_subdev_is_streaming() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 07/10] media: subdev: Support privacy led in v4l2_subdev_enable/disable_streams() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 08/10] media: subdev: Refactor v4l2_subdev_enable/disable_streams() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 09/10] media: subdev: Support single-stream case in v4l2_subdev_enable/disable_streams() Tomi Valkeinen
2024-04-16 10:40 ` [PATCH v4 10/10] media: subdev: Support non-routing subdevs in v4l2_subdev_s_stream_helper() Tomi Valkeinen
2024-04-16 10:43 ` Tomi Valkeinen
2024-04-16 13:28 ` Umang Jain [this message]
2024-04-16 13:44 ` Tomi Valkeinen
2024-04-16 13:51 ` Umang Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92279ce6-e410-40f2-bc6d-ad842aa9e106@ideasonboard.com \
--to=umang.jain@ideasonboard.com \
--cc=hverkuil@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®