[PATCH] drm/amd/display: Scale custom brightness curve from full range

[PATCH] drm/amd/display: Scale custom brightness curve from full range

[Akhmed Zhitaev]

Custom brightness curves use an 8-bit input signal.  After exporting the
full PWM range to userspace, the curve normalizer still divides requests
by the physical PWM span.  On panels with a nonzero minimum PWM level,
this can produce a curve input greater than 255 and send an invalid
backlight level to DC.

Scale the userspace [0..max] range to the curve's [0..255] range
instead.  This retains the full advertised range and keeps the reverse
readback conversion unchanged.

Fixes: 8dbd72cb7900 ("drm/amd/display: Export full brightness range to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Akhmed Zhitaev <zhitaevakh@gmail.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 40d82a3ee..533c69f0b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5131,10 +5131,10 @@ static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
 	return 1;
 }
 
-/* Rescale from [min..max] to [0..AMDGPU_MAX_BL_LEVEL] */
-static inline u32 scale_input_to_fw(int min, int max, u64 input)
+/* Rescale userspace [0..max] to the firmware curve's [0..255]. */
+static inline u32 scale_input_to_fw(int max, u64 input)
 {
-	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max - min);
+	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max);
 }
 
 /* Rescale from [0..AMDGPU_MAX_BL_LEVEL] to [min..max] */
@@ -5147,7 +5147,7 @@ static void convert_custom_brightness(const struct amdgpu_dm_backlight_caps *cap
 				      unsigned int min, unsigned int max,
 				      uint32_t *user_brightness)
 {
-	u32 brightness = scale_input_to_fw(min, max, *user_brightness);
+	u32 brightness = scale_input_to_fw(max, *user_brightness);
 	u8 lower_signal, upper_signal, upper_lum, lower_lum, lum;
 	int left, right;
 
-- 
2.55.0

Re: [PATCH] drm/amd/display: Scale custom brightness curve from full range

[Mario Limonciello]

On 8/13/26 12:09, Akhmed Zhitaev wrote:
> Custom brightness curves use an 8-bit input signal.  After exporting the
> full PWM range to userspace, the curve normalizer still divides requests
> by the physical PWM span.  On panels with a nonzero minimum PWM level,
> this can produce a curve input greater than 255 and send an invalid
> backlight level to DC.
> 
> Scale the userspace [0..max] range to the curve's [0..255] range
> instead.  This retains the full advertised range and keeps the reverse
> readback conversion unchanged.
> 
> Fixes: 8dbd72cb7900 ("drm/amd/display: Export full brightness range to userspace")
> Cc: stable@vger.kernel.org
> Signed-off-by: Akhmed Zhitaev <zhitaevakh@gmail.com>
> ---
>   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 40d82a3ee..533c69f0b 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -5131,10 +5131,10 @@ static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
>   	return 1;
>   }
>   
> -/* Rescale from [min..max] to [0..AMDGPU_MAX_BL_LEVEL] */
> -static inline u32 scale_input_to_fw(int min, int max, u64 input)
> +/* Rescale userspace [0..max] to the firmware curve's [0..255]. */
> +static inline u32 scale_input_to_fw(int max, u64 input)
>   {
> -	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max - min);
> +	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max);
>   }
>   
>   /* Rescale from [0..AMDGPU_MAX_BL_LEVEL] to [min..max] */
> @@ -5147,7 +5147,7 @@ static void convert_custom_brightness(const struct amdgpu_dm_backlight_caps *cap
>   				      unsigned int min, unsigned int max,
>   				      uint32_t *user_brightness)
>   {
> -	u32 brightness = scale_input_to_fw(min, max, *user_brightness);
> +	u32 brightness = scale_input_to_fw(max, *user_brightness);
>   	u8 lower_signal, upper_signal, upper_lum, lower_lum, lum;
>   	int left, right;
>   

Is this still needed with

"drm/amd/display: Fix backlight max_brightness to match exported range"

https://github.com/torvalds/linux/commit/f1b5d8f9cc54ae8a2567ac126867ae488e1bf625

Re: [PATCH] drm/amd/display: Scale custom brightness curve from full range

[Ахмед Житаев]

Yes, this is still needed.

f1b5d8f9cc54 fixes the advertised max_brightness mismatch by restoring
the full userspace range [0..max].

The issue fixed by this patch is different: the custom brightness curve
input is still normalized by (max - min). On panels with a non-zero PWM
minimum, valid userspace requests near the top of the [0..max] range can
therefore produce a curve input above 255.

On my panel, min=3084 and max=65535. Without this patch, requests above
the upper boundary caused the backlight to drop dark; with this patch,
the full range maps into [0..255] and the issue no longer reproduces.

I also tested with the f1b5d8f9cc54 semantics present, so the regression
is still present without this change.


чт, 13 авг. 2026 г. в 22:45, Mario Limonciello <mario.limonciello@amd.com>:
>
>
>
> On 8/13/26 12:09, Akhmed Zhitaev wrote:
> > Custom brightness curves use an 8-bit input signal.  After exporting the
> > full PWM range to userspace, the curve normalizer still divides requests
> > by the physical PWM span.  On panels with a nonzero minimum PWM level,
> > this can produce a curve input greater than 255 and send an invalid
> > backlight level to DC.
> >
> > Scale the userspace [0..max] range to the curve's [0..255] range
> > instead.  This retains the full advertised range and keeps the reverse
> > readback conversion unchanged.
> >
> > Fixes: 8dbd72cb7900 ("drm/amd/display: Export full brightness range to userspace")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Akhmed Zhitaev <zhitaevakh@gmail.com>
> > ---
> >   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++----
> >   1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > index 40d82a3ee..533c69f0b 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > @@ -5131,10 +5131,10 @@ static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
> >       return 1;
> >   }
> >
> > -/* Rescale from [min..max] to [0..AMDGPU_MAX_BL_LEVEL] */
> > -static inline u32 scale_input_to_fw(int min, int max, u64 input)
> > +/* Rescale userspace [0..max] to the firmware curve's [0..255]. */
> > +static inline u32 scale_input_to_fw(int max, u64 input)
> >   {
> > -     return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max - min);
> > +     return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max);
> >   }
> >
> >   /* Rescale from [0..AMDGPU_MAX_BL_LEVEL] to [min..max] */
> > @@ -5147,7 +5147,7 @@ static void convert_custom_brightness(const struct amdgpu_dm_backlight_caps *cap
> >                                     unsigned int min, unsigned int max,
> >                                     uint32_t *user_brightness)
> >   {
> > -     u32 brightness = scale_input_to_fw(min, max, *user_brightness);
> > +     u32 brightness = scale_input_to_fw(max, *user_brightness);
> >       u8 lower_signal, upper_signal, upper_lum, lower_lum, lum;
> >       int left, right;
> >
>
> Is this still needed with
>
> "drm/amd/display: Fix backlight max_brightness to match exported range"
>
> https://github.com/torvalds/linux/commit/f1b5d8f9cc54ae8a2567ac126867ae488e1bf625

Re: [PATCH] drm/amd/display: Scale custom brightness curve from full range

[Mario Limonciello]

On 8/13/26 12:09, Akhmed Zhitaev wrote:
> Custom brightness curves use an 8-bit input signal.  After exporting the
> full PWM range to userspace, the curve normalizer still divides requests
> by the physical PWM span.  On panels with a nonzero minimum PWM level,
> this can produce a curve input greater than 255 and send an invalid
> backlight level to DC.
> 
> Scale the userspace [0..max] range to the curve's [0..255] range
> instead.  This retains the full advertised range and keeps the reverse
> readback conversion unchanged.
> 
> Fixes: 8dbd72cb7900 ("drm/amd/display: Export full brightness range to userspace")
> Cc: stable@vger.kernel.org
> Signed-off-by: Akhmed Zhitaev <zhitaevakh@gmail.com>

Thanks for this.

We have moved the code in amd-staging-drm-next

https://gitlab.freedesktop.org/agd5f/linux/-/commit/6c2b46e9774f13e45985f6da9f7d5f8458767b98

As your changes are trivial, I'll adjust while commiting.

Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>

> ---
>   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 40d82a3ee..533c69f0b 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -5131,10 +5131,10 @@ static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps,
>   	return 1;
>   }
>   
> -/* Rescale from [min..max] to [0..AMDGPU_MAX_BL_LEVEL] */
> -static inline u32 scale_input_to_fw(int min, int max, u64 input)
> +/* Rescale userspace [0..max] to the firmware curve's [0..255]. */
> +static inline u32 scale_input_to_fw(int max, u64 input)
>   {
> -	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max - min);
> +	return DIV_ROUND_CLOSEST_ULL(input * AMDGPU_MAX_BL_LEVEL, max);
>   }
>   
>   /* Rescale from [0..AMDGPU_MAX_BL_LEVEL] to [min..max] */
> @@ -5147,7 +5147,7 @@ static void convert_custom_brightness(const struct amdgpu_dm_backlight_caps *cap
>   				      unsigned int min, unsigned int max,
>   				      uint32_t *user_brightness)
>   {
> -	u32 brightness = scale_input_to_fw(min, max, *user_brightness);
> +	u32 brightness = scale_input_to_fw(max, *user_brightness);
>   	u8 lower_signal, upper_signal, upper_lum, lower_lum, lum;
>   	int left, right;
>