mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Daniel Golle <daniel@makrotopia.org>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Russell King <linux@armlinux.org.uk>,
	Richard van Schagen <richard@routerhints.com>,
	Richard van Schagen <vschagen@cs.com>,
	Frank Wunderlich <frank-w@public-files.de>,
	Bartel Eerdekens <bartel.eerdekens@constell8.be>,
	erkin.bozoglu@xeront.com, mithat.guner@xeront.com,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH net-next 12/30] net: dsa: mt7530: move XTAL check to mt7530_setup()
Date: Thu, 25 May 2023 10:04:23 +0300	[thread overview]
Message-ID: <7d2aacbe-9725-2c15-38b7-deb56184f82b@arinc9.com> (raw)
In-Reply-To: <20230524181512.tmll4ijpijmc5fea@skbuf>

On 24.05.2023 21:15, Vladimir Oltean wrote:
> On Mon, May 22, 2023 at 03:15:14PM +0300, arinc9.unal@gmail.com wrote:
>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>
>> The crystal frequency concerns the switch core. The frequency should be
>> checked when the switch is being set up so the driver can reject the
>> unsupported hardware earlier and without requiring port 6 to be used.
>>
>> Move it to mt7530_setup().
>>
>> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
> 
> Do you know why a crystal frequency of 20 MHz is not supported?

I don't know, it just isn't.

https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/master/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1076

> 
>>   drivers/net/dsa/mt7530.c | 18 ++++++++++--------
>>   1 file changed, 10 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
>> index 049f7be0d790..fa48273269c4 100644
>> --- a/drivers/net/dsa/mt7530.c
>> +++ b/drivers/net/dsa/mt7530.c
>> @@ -408,13 +408,6 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
>>   
>>   	xtal = mt7530_read(priv, MT7530_HWTRAP) & HWTRAP_XTAL_MASK;
>>   
>> -	if (xtal == HWTRAP_XTAL_20MHZ) {
>> -		dev_err(priv->dev,
>> -			"%s: MT7530 with a 20MHz XTAL is not supported!\n",
>> -			__func__);
>> -		return -EINVAL;
>> -	}
>> -
>>   	switch (interface) {
>>   	case PHY_INTERFACE_MODE_RGMII:
>>   		trgint = 0;
>> @@ -2133,7 +2126,7 @@ mt7530_setup(struct dsa_switch *ds)
>>   	struct mt7530_dummy_poll p;
>>   	phy_interface_t interface;
>>   	struct dsa_port *cpu_dp;
>> -	u32 id, val;
>> +	u32 id, val, xtal;
>>   	int ret, i;
>>   
>>   	/* The parent node of master netdev which holds the common system
>> @@ -2203,6 +2196,15 @@ mt7530_setup(struct dsa_switch *ds)
>>   		return -ENODEV;
>>   	}
>>   
>> +	xtal = mt7530_read(priv, MT7530_HWTRAP) & HWTRAP_XTAL_MASK;
>> +
>> +	if (xtal == HWTRAP_XTAL_20MHZ) {
>> +		dev_err(priv->dev,
>> +			"%s: MT7530 with a 20MHz XTAL is not supported!\n",
>> +			__func__);
> 
> I don't think __func__ brings much value here, it could be dropped in
> the process of moving the code.

Will do.

> 
> Also, the HWTRAP register is already read once, here (stored in "val"):
> 
> 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
> 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
> 				 20, 1000000);
> 
> I wonder if we really need to read it twice.

Likely not, good catch.

Arınç

  reply	other threads:[~2023-05-25  7:05 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-22 12:15 [PATCH net-next 00/30] net: dsa: mt7530: improve, trap BPDU & LLDP, and prefer CPU port arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 01/30] net: dsa: mt7530: add missing @p5_interface to mt7530_priv description arinc9.unal
2023-05-23 23:29   ` Andrew Lunn
2023-05-22 12:15 ` [PATCH net-next 02/30] net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel arinc9.unal
2023-05-23 23:31   ` Andrew Lunn
2023-05-24  7:41     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 03/30] net: dsa: mt7530: properly support MT7531AE and MT7531BE arinc9.unal
2023-05-24 14:48   ` Vladimir Oltean
2023-05-25  6:00     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 04/30] net: dsa: mt7530: improve comments regarding port 5 and 6 arinc9.unal
2023-05-23 23:35   ` Andrew Lunn
2023-05-24 14:49   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 05/30] net: dsa: mt7530: read XTAL value from correct register arinc9.unal
2023-05-23 23:37   ` Andrew Lunn
2023-05-24 16:57   ` Vladimir Oltean
2023-05-25  6:20     ` Arınç ÜNAL
2023-05-25 13:31       ` Vladimir Oltean
2023-06-04  6:34         ` Arınç ÜNAL
2023-06-04  7:11           ` Vladimir Oltean
2023-06-04 16:22             ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 06/30] net: dsa: mt7530: improve code path for setting up port 5 arinc9.unal
2023-05-24 17:35   ` Vladimir Oltean
2023-05-25  6:42     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 07/30] net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled arinc9.unal
2023-05-24 17:45   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured arinc9.unal
2023-05-24 17:51   ` Vladimir Oltean
2023-05-25  6:49     ` Arınç ÜNAL
2023-05-26 13:01       ` Vladimir Oltean
2023-06-03 12:15         ` Arınç ÜNAL
2023-06-03 12:26           ` Russell King (Oracle)
2023-06-04 10:46             ` Arınç ÜNAL
2023-06-04 12:18               ` Russell King (Oracle)
2023-06-04 12:55                 ` Vladimir Oltean
2023-06-04 13:07                   ` Russell King (Oracle)
2023-06-04 13:14                     ` Arınç ÜNAL
2023-06-04 13:25                       ` Vladimir Oltean
2023-06-04 15:13                       ` Russell King (Oracle)
2023-06-04 16:00                         ` Russell King (Oracle)
2023-06-04 16:06                           ` Russell King (Oracle)
2023-06-04 16:14                             ` Arınç ÜNAL
2023-06-10 10:57                               ` Arınç ÜNAL
2023-06-10 17:55                                 ` Vladimir Oltean
2023-06-11  7:23                                   ` Arınç ÜNAL
2024-01-10 11:15                                     ` Arınç ÜNAL
2024-01-10 14:27                                       ` Vladimir Oltean
2024-01-10 17:15                                         ` Arınç ÜNAL
2024-01-10 18:05                                           ` Vladimir Oltean
2024-01-10 18:31                                             ` Russell King (Oracle)
2024-01-11  9:19                                               ` Vladimir Oltean
2023-06-05 14:36                         ` Arınç ÜNAL
2023-06-03 12:27           ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 09/30] net: dsa: mt7530: empty default case on mt7530_setup_port5() arinc9.unal
2023-05-24 18:04   ` Vladimir Oltean
2023-05-24 18:05   ` Vladimir Oltean
2023-05-25  6:51     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 10/30] net: dsa: mt7530: call port 6 setup from mt7530_mac_config() arinc9.unal
2023-05-24 18:08   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 11/30] net: dsa: mt7530: remove pad_setup function pointer arinc9.unal
2023-05-24 18:09   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 12/30] net: dsa: mt7530: move XTAL check to mt7530_setup() arinc9.unal
2023-05-23 23:40   ` Andrew Lunn
2023-05-24 18:15   ` Vladimir Oltean
2023-05-25  7:04     ` Arınç ÜNAL [this message]
2023-05-22 12:15 ` [PATCH net-next 13/30] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6() arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 14/30] net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6() arinc9.unal
2023-05-26 13:08   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 15/30] net: dsa: mt7530: set TRGMII RD TAP if trgmii is being used arinc9.unal
2023-05-26 13:09   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 16/30] net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup() arinc9.unal
2023-05-26 13:17   ` Vladimir Oltean
2023-06-04  7:05     ` Arınç ÜNAL
2023-06-04  7:14       ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 17/30] net: dsa: mt7530: fix port capabilities for MT7988 arinc9.unal
2023-05-26 13:20   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 18/30] net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional arinc9.unal
2023-05-26 13:21   ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 19/30] net: dsa: mt7530: set interrupt register only for MT7530 arinc9.unal
2023-05-26 13:25   ` Vladimir Oltean
2023-06-04  7:18     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 20/30] net: dsa: mt7530: properly reset MT7531 switch arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 21/30] net: dsa: mt7530: get rid of useless error returns on phylink code path arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 22/30] net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 23/30] net: dsa: mt7530: run mt7530_pll_setup() only with 40 MHz XTAL arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 24/30] net: dsa: mt7530: rename MT7530_MFC to MT753X_MFC arinc9.unal
2023-05-26 15:42   ` Vladimir Oltean
2023-05-26 15:50     ` Russell King (Oracle)
2023-06-04  8:06       ` Arınç ÜNAL
2023-06-04 13:17         ` Vladimir Oltean
2023-06-04 13:25           ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 25/30] net: dsa: mt7530: properly set MT7531_CPU_PMAP arinc9.unal
2023-05-26 15:51   ` Vladimir Oltean
2023-06-04  8:21     ` Arınç ÜNAL
2023-06-04 13:08       ` Vladimir Oltean
2023-06-04 13:33         ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 26/30] net: dsa: mt7530: properly set MT7530_CPU_PORT arinc9.unal
2023-05-26 16:55   ` Vladimir Oltean
2023-06-04  8:33     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 27/30] net: dsa: mt7530: introduce BPDU trapping for MT7530 switch arinc9.unal
2023-05-26 17:02   ` Vladimir Oltean
2023-06-04  8:51     ` Arınç ÜNAL
2023-06-04  9:23       ` Vladimir Oltean
2023-06-04  9:39         ` Arınç ÜNAL
2023-06-04 12:47           ` Vladimir Oltean
2023-06-10  8:32             ` Arınç ÜNAL
2023-06-10 17:57               ` Vladimir Oltean
2023-05-22 12:15 ` [PATCH net-next 28/30] net: dsa: mt7530: introduce LLDP frame trapping arinc9.unal
2023-05-22 12:15 ` [PATCH net-next 29/30] net: dsa: introduce preferred_default_local_cpu_port and use on MT7530 arinc9.unal
2023-05-26 17:17   ` Vladimir Oltean
2023-06-04 10:02     ` Arınç ÜNAL
2023-05-22 12:15 ` [PATCH net-next 30/30] MAINTAINERS: add me as maintainer of MEDIATEK SWITCH DRIVER arinc9.unal
2023-05-24 14:37   ` Vladimir Oltean
2023-05-26 17:38   ` Vladimir Oltean
2023-05-22 12:25 ` [PATCH net-next 00/30] net: dsa: mt7530: improve, trap BPDU & LLDP, and prefer CPU port Andrew Lunn
2023-05-22 13:37   ` Arınç ÜNAL
2023-05-22 15:43     ` Vladimir Oltean
2023-05-22 14:09 ` Horatiu Vultur
2023-05-22 14:35   ` Arınç ÜNAL
2023-05-22 18:13   ` Russell King (Oracle)
2023-05-23  1:54     ` Jakub Kicinski
2023-05-26 17:47 ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7d2aacbe-9725-2c15-38b7-deb56184f82b@arinc9.com \
    --to=arinc.unal@arinc9.com \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=bartel.eerdekens@constell8.be \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=erkin.bozoglu@xeront.com \
    --cc=f.fainelli@gmail.com \
    --cc=frank-w@public-files.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=mithat.guner@xeront.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=richard@routerhints.com \
    --cc=sean.wang@mediatek.com \
    --cc=vschagen@cs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®